Used Shrinking Packaging Machine for sale (72,116)

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Gsdpfxeyzxgfe Abisbw Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2535, type of input current: three-phase, product height (max.): 150 mm, product length (max.): 450 mm, product width (max.): 280 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 16 A, width of welding knife: 480 mm, length of welding knife: 380 mm, overall weight: 750 kg, year of last overhaul: 2018, energy consumption: 8 kWh, Neatly refurbished packaging machine with shrink tunnel. Possibility to test run at our location. Maximum speed of 30 pieces per minute. Maximum single fold film width 600 mm. Transport not included. Gbodpfjwutu Rex Abijw

Condition: used, Year of construction: 2020, Coalza RS400-DH Automatic Vertical Dry Ice Packaging & Dosing Machine, 2020 Coalza RS400-DH automatic vertical form-fill-seal packaging machine, manufactured in 2020. Serial number 11431. This machine is equipped with volumetric dosing and was configured for packing dry ice. The original Coalza installation layout for this serial number specifies a 10 kg dry ice bag application and a bag ejector. The take-away conveyor is indicated as customer-supplied in the original layout and is not included unless separately agreed upon. The machine forms, fills, and seals bags from roll-fed film. The model manual specifies PE and PP film. Controls include a PLC with touchscreen and temperature-controlled sealing. Technical specifications: Manufacturer: Coalza Model: RS400-DH Serial number: 11431 Gjdpfj Agq Sdsx Abisbw Year: 2020 Application: Dry ice bagging, original layout for 10 kg bags Dosing system: Volumetric Film: PE and PP Electrical supply: 380 V, 3-phase + neutral + earth, 50 Hz Rated current: 10 A Installed power: 3.8 kW Compressed air: 6 bar; approx. 40 l/min for the basic machine, up to 90 l/min with accessories Approximate dimensions: 1,342 × 1,993 × 3,048 mm (W × D × H); installation dimensions may vary RS400 series reference: bag width up to 450 mm, recommended minimum 100 mm; film roll width up to 950 mm; bag length 50–600 mm Manufacturer’s stated RS400 mechanical maximum: up to 50 bags/min; actual output depends on the product, film, and machine configuration Coalza RS400-DH, Coalza packaging machine, dry ice packaging machine, dry ice bagging machine, carbonic ice packaging machine, ice bagging machine, automatic vertical packaging machine, vertical form fill seal machine, VFFS packaging machine, volumetric dosing machine, 10 kg dry ice bags, industrial packaging machinery, used packaging machine.

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. Gjdpfx Ajz D Ugujbisbw In production up to 23.09.2026 Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer

Condition: used, Angle sealing machine with shrink tunnel For sale is a professional, semi-automatic angle sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. It is ideal for quickly and professionally shrink-wrapping cardboard boxes, books, bottles, textiles, or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The angle sealer works with a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculation system with adjustable air deflectors. This ensures a completely even heat distribution and a perfectly smooth shrinking result – even with demanding product geometries. Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar, and tunnel temperature to be adjusted precisely to the film thickness used (PO, PE, or PVC). Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid conveyor belt. Gjdpfx Abjz Dtf Asiobw It reliably transports even heavy packaged goods (e.g., printed materials, canned goods, or wooden parts). Ergonomic infeed table: The separate, mobile preparation table allows for quick and easy threading of products into the half-tube film. The film unwinding is smooth and easy thanks to the ball-bearing system. Perfectly suited for printing companies, logistics centers, laundries, or contract packers for shrink-wrapping: - Cardboard boxes and multi-packs - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle carriers and cans Technical data & features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Angle sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid conveyor belt in the shrink tunnel Mains voltage: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design, in the tunnel opening) Net weight: approx. 400 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, PRICE REDUCED: €29,000 → €25,000 (excluding VAT) – machine available immediately Resta automatic mattress packaging machine: integrated compression and decompression The Resta mattress packaging machine is an automatic packaging machine dedicated to the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with compression and then decompression of the mattress, while protecting it in a suitable film. Advantages of mattress packaging in production and distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated compression: mattresses packaged in PVC or plastic film, without manual intervention Easy decompression: the mattress returns to its normal shape in the store or at the customer's location Optimized transport: significant reduction in volume, with more space in the truck and in storage Preparation for sale: final presentation of the mattress in appropriate commercial conditions Vacuum packaging machine: protection and transport of the mattress What really changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, PVC film or plastic film, and ensures a hermetic seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Compatible with spring and foam mattresses Ideal when your production mixes spring and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment handles both bagged mattresses and compressible structures equally well, simplifying workshop organization. Spring mattresses: compression without damaging the springs, thanks to a progressive hydraulic system Foam mattresses: adaptation specific to the product, with rapid shape recovery after compression Compatible with PVC film and other specialized packaging films Professional sealing: hermetic closure of the film to protect the mattress during transport Industrial applications and mattress packaging processes In practice, on an industrial mattress packaging line, this Resta automatic packaging machine is integrated after the [omitted: the text stops mid-sentence]. Special feature: allows double independent packaging (two separate bags) in the same space as a standard packaging machine, thanks to two superimposed polyethylene rolls. It also allows single or customized packaging (two different rolls, automatic change according to programming). The feeding belt and detachable press also allow packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official technical specifications: Weight: 4,900 kg Electrical consumption: 11 kW Compressed air: 6-10 bar Power supply: 400V – 50Hz three-phase Available options: Press with 2 or 4 cylinders Reinforced hoist Gbedezmpvrjpfx Abiew Motorized cradle for additional customization rolls Kit for removing polyethylene waste

Condition: good (used), Year of construction: 2021, functionality: fully functional, Cushion Pack CP 428 S2i/6 packaging cushioning machine (cardboard shredder) in fully functional condition: Year of manufacture: 2021 Power: 3 kW Cushion width: up to 420 mm Gedpfjzpwnzsx Abiobw Infeed height: 20 mm Shipping via a freight forwarder is possible upon request. #8552-2

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 938, input voltage: 400 V, roll diameter: 310 mm, type of input current: three-phase, L.P. Packaging SFE 1100 PLC shrink-wrapping machine (sleeve wrapper) with integrated shrink tunnel, year of manufacture 2008. PLC control, 400V/50Hz + N, 22 kW installed power. Max. film roll diameter 310 mm. Complete with conveyor belt, film holder, and protective cover. From an active printing company, available for collection in Ghent. Gbodpo Ahwzcefx Abiew

Condition: used, Skinetta ASK 450 Stretch Banding Machine Purpose of the Machine The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink wrapping machines, the film is stretched tightly around the packaging before sealing. This tension is the main advantage of this process, reducing film consumption by up to 20%. A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering. The film is sealed in a very small area (welded), resulting in a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the overhanging film can be reduced laterally. This increases the stability of the container and prevents individual products in correspondingly grouped containers from falling out sideways. With suitable additional devices, a complete closure of the containers can be achieved by sealing, crimping, and folding the sides. The SKINETTA stretch banding machine program includes six basic models for film widths of 25 to 200 mm, 290 mm, 440 mm, 590 mm, 790 mm, and 1,250 mm. In addition to the single-lane version, two- to four-lane systems are available to increase production output. Gbsdpfep U T Ifex Abijw SK series (semi-automatic): In the SK series, the products are manually grouped on the machine table by an operator. The insertion into the film and the subsequent stretch banding process are initiated either via a foot switch or a two-hand control. A later upgrade to fully automatic operation is possible (except for model SK 200). ASK series (fully automatic): In the ASK series, the product feed, grouping, and subsequent banding are fully automatic with the help of appropriate additional devices. A modular system of feed, grouping, forming, and special components enables individual adaptation to a wide range of customer requirements. Thanks to more than 20 years of experience, proven standard components can be used for a wide variety of packaging tasks. Technical data Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 V Power consumption: 6.1 kW Additional equipment: rod chain conveyor You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2024, condition: like new (used), functionality: fully functional, Sure. Below is a technical and commercial description suitable for product presentations, catalogs, or proposals: ### Mertmakina Mattress Packaging Machine with Integrated Quality Control System The Mertmakina mattress packaging machine is an industrial solution designed to automate and optimize the mattress packaging process, ensuring speed, uniformity, and quality in the final product packaging. The equipment integrates a quality control system, allowing for the monitoring of key stages in the packaging process and the identification of potential anomalies before the product leaves the line. #### Key Features * Automatic mattress feeding and positioning, ensuring a continuous and regular process. * Automatic packaging system, adapted to the dimensions and characteristics of different mattress models. * Control of the application and sealing of the packaging, ensuring a uniform and consistent finish. * Integrated quality control system, designed to verify process parameters such as positioning, packaging integrity, and proper sealing. * Error and anomaly detection, with the possibility of signaling or automatic rejection of units that do not meet the defined parameters. * Intuitive operating interface, allowing the operator to monitor the machine's status, adjust parameters, and consult process information. * Recording and monitoring of production and control data, contributing to traceability and continuous improvement of production. * Robust industrial construction, suitable for operation in continuous production environments. * Increased productivity and reduced manual intervention, while simultaneously reducing variability between packages. ### Integrated Quality Control The integration of quality control transforms the machine into a more complete production and inspection system. Each mattress can be monitored during the process, allowing verification of whether the packaging has been correctly applied and whether the product meets the previously defined parameters. When a condition outside the established limits is detected, the system can generate an alert for the operator and, depending on the installed configuration, automatically direct the product for inspection or rejection. Gbsdpfx Aez Dk Arobiow In this way, the solution helps to reduce packaging errors, increase the consistency of the final product, improve traceability, and reduce waste. ### Result The Mertmakina mattress packaging machine, equipped with an integrated quality control system, provides a solution focused on automation, productivity, standardization, and process control, enabling companies to increase the efficiency of the production line and ensure a consistent final presentation of the mattresses.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The following three-part packaging line is offered on behalf of the owner, consisting of: + One semi-automatic L-sealer Sealing frame: 900 x 700 mm Product conveyor belt Film separator sheet Film roll holder for PO and PE films Machine is mobile 230 V, 3 m cable Year of manufacture: 2013, manufacturer unknown + One shrink tunnel Pass-through height: 250 mm Pass-through width: 500 mm Tunnel length (hood): 1,300 mm Rod spacing: 25 mm Three-phase current, 16 A and + One product conveyor belt 1,000 x 400 mm Godpexq Hcqefx Abisbw Adjustable side guides Harting connector The machine comes from a demonstration room, has correspondingly few operating hours, and is therefore in very good overall condition. The machine location is Salzgitter. The total price of 4,275 euros is ex works, unpacked, plus VAT. The individual components of the line can also be purchased separately. The individual prices – also ex works, unpacked, plus VAT – are as follows: L-sealer: 1,485 euros Shrink tunnel: 2,250 euros Product conveyor belt: 540 euros

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Gjdpfx Abozvycnoiebw Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: SACMI / Pack Sud HPS20 Industrial Flowpack Packaging Machine Check out our other listings. DrDryice We are offering a SACMI / Pack Sud HPS20 horizontal flowpack packaging machine, manufactured in 2021. The machine is designed for the automatic packaging of products in flexible film, creating sealed packages with one longitudinal and two transverse seals. Technical Specifications Manufacturer: Pack Sud S.r.l. – SACMI Group, Italy Model: HPS20 Year of manufacture: 2021 Serial number: HPS20-21044C Machine type: Horizontal Flowpack Packaging Machine Maximum capacity: Up to 150 cycles/minute Maximum film speed: 20 metres/minute Electrical supply: 400 V / 50 Hz / 3-phase Installed power: 3 kW Required compressed air pressure: 6 bar Machine dimensions: Approx. 4,100 × 1,278 × 1,622 mm Machine weight: Approx. 850 kg The stated capacity and dimensions are based on the manufacturer's standard HPS20 specifications. Actual performance depends on the product, packaging dimensions, and machine configuration. Applications Suitable for horizontal packaging of products using flexible packaging film, including applications within the food and industrial packaging sectors, subject to product compatibility. Documentation Available Original user and maintenance manuals Gbedpfx Abe Afamijiew Electrical schematics Control panel documentation CE Declaration of Conformity Additional Information The machine can be offered as an individual unit. Further technical information and documentation are available upon request. For more information, please contact: SACMI HPS20, SACMI HPS 20, SACMI packaging machine, SACMI flowpack, SACMI flow wrapper, Pack Sud HPS20, Pack Sud HPS 20, PackSud HPS20, Pack Sud packaging machine, Pack Sud flowpack, HPS20-21044C, Italian packaging machinery, used SACMI machine, used Pack Sud machine, 2021 packaging machine. English – Packaging Machines: Flowpack machine, flow pack machine, flowpacker, flow packer, flow wrapper, flow wrapping machine, horizontal flow wrapper, horizontal flowpack machine, horizontal packaging machine, automatic packaging machine, industrial packaging machine, wrapping machine, automatic wrapping machine, flexible packaging machine, film packaging machine, horizontal form fill seal machine, horizontal form fill and seal, HFFS machine, HFFS packaging machine, pillow pack machine, pillow packaging machine, three-side seal packaging, longitudinal sealing machine, transverse sealing machine, rotary sealing machine, heat sealing packaging machine, plastic film wrapping machine, roll-fed packaging machine, food packaging machinery, product wrapping machine, individual product packaging machine, used packaging equipment, second hand packaging machine, pre-owned flow wrapper, packaging machinery for sale.

Condition: used, Year of construction: 2002, Machine for cartoning glass bottles, for packing the carton packages on trays with subsequent shrink film wrapping. Additional title: Five‑step machine Gbsdpfx Absy Nm Rujiow Capacity: 26000 bo/min when packing 24 x 0.33 litre bottles Cycle time: 18 cycles/min when packing 24 x 0.33 litre bottles Formats: Trays with 4 x six-packs or 3 x eight-packs for 0.33 litre bottles, boxes with 20 x 0.5 litre bottles also possible Features: Tray erector/adhesive application (Nordson ‘Problue Flex’, built in 2021), carton packer, tray packer, shrink film machine, drying tunnel, date coding (best-before date marking)

Condition: excellent (used), Endoline Carton Erector Model 221 With bottom taper Serial number: 051235542 415 V, 3 Ph, 50 Hz Godjv Tywwopfx Abiebw Dimensions carton erector: 1850 mm x 1850 mm x 2150 mm Including outfeed roller conveyor, roller width: 400 mm Dimensions roller conveyor: 1750 mm x 800 mm x 550 mm.

Condition: refurbished (used), Year of construction: 2004, functionality: unexamined, total width: 1,200 mm, total length: 5,000 mm, total height: 2,000 mm, product height (min.): 850 mm, film width: 420 mm, The machine can process both hard and soft film, is capable of tray forming, product gas flushing, and has forming tool cooling, or can perform only vacuum forming. Various forming tools included: 1:1; 1:2; 1:3; additionally, slice packs with peel corner are possible. Comes with a fully refurbished vacuum pump. Also included are approximately 50 rolls of film. The machine must be removed from the premises, hence special price for everything: €3,000 negotiable. Gjdpfxjynnlcs Abijbw

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: REMUND AG (Switzerland) Type: Vacuum packaging machine Capacity: 1–4 bags/cycle Year of manufacture: 2002 Workstations: 2 Products: Cheese, meat, and other large-format food products Gbjdpfx Aez Hdbtsbisw Equipped with modified atmosphere packaging (MAP) PLC: Siemens S7 Condition: very good and fully functional

Condition: good (used), Year of construction: 2014, OCS Checkweigher Gedpoucgalsfx Abijbw Weight range min - 100grams, Max 800 grams Speed 30 pieces / min Power 230v / 50hz Complete with touch screen control Two pneumatic reject arms Fully stainless steel Belt dimensions 1750mm x 195mm In good working condition

Condition: used, Stedler SAM-BA-MAT E 500 Shrink wrapping machine AM-BA-MAT E 500 Shrink packaging machine Functional description The machine is used for individual or collective wrapping of packages with polyethylene shrink film. * Operating principle: Semi-automatic and pneumatic. * Process: The product is manually fed via a size adjustment slide; all subsequent steps (banding, further transport to the shrink tunnel) are carried out automatically. * Sealing process: A continuously heated safety sealing unit separates and seals the film. A Teflon cloth prevents the film from sticking to the sealing blade. Film roll placement * Positioning: The rolls are placed on pairs of support rollers at the top and bottom. * Adjustment: Adjustment rings limit the film laterally with a clearance of approximately 1–2 mm (adjustment is made using an Allen key). * Preparation: The film ends are guided through the sealing unit. By moving the infeed carriage back and forth once, the separating sealing process is pneumatically initiated, creating the so-called film curtain. * Film material: Processes two rolls of flat shrink film made of polyethylene. * Film thickness: The recommended standard thickness is 40 µm (micrometers). * Film alignment: The rolls are fixed with adjustment rings, allowing for a lateral clearance of 1–2 mm. * Film width: The maximum width is 210 mm. * Control: The machine operates pneumatically and is activated via a manual infeed slide. Machine data Manufacturer: Stedler Type: SAM-BA-MAT E 500 Operating voltage: 230 V Connected load: 0.75 kW Operating principle: Semi-automatic and pneumatic [Image content] Dimensions (L x W x H): 1500 x 1170 x 1300 mm Year of construction: 2004 Sealing & film specifications Godstzbkkepfx Abiobw Maximum temperature: 250 °C Sealing readiness: approx. 1.5 s Film material: Flat shrink film made of polyethylene (PE) [Image content] Film width: up to 210 mm Film thickness: 40 µm (micrometers) More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Marquart E-ZWO Shrink Fitting Machine, Pyrocooler Cooling Tower 3-25mm Ø Dimensions: approx. 600mm x 541mm x 357mm (L x W x H) 11kW 380 V Universal holder for HSK, SK, and BT tool holders. Induction coil: various sizes can be easily interchanged via a simple plug-in connection. Universal chuck: Clamps all tool holder sizes, no accessories required. You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Gsde Aifi Tepfx Abijbw Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Offered for sale is an automatic shrink-wrapping system with film feed and shrink tunnel. The system consists of a packaging machine with an enclosed working area and a downstream shrink tunnel. Control system: Control panel with display, membrane keypad, control buttons and emergency stop button. Equipped with film roll holder, film guide, motorized conveyor belts, transparent protective enclosure and signal light. Inspection possible by arrangement. Gsdpfxoz N E Ubs Abiebw

Year of construction: 2017, condition: used, Flow wrapper with a dual-lane elevator, GIRO GB-50 CL2RA2 model (year 2017). Automatic machine for heat-sealing bags. Designed for vegetables and citrus fruits, with its latest production run being avocados. It can work with 6 types of bags, including ultrabag, Girsac, Window compact, MiniBag, Handle Bag, and Girplus. It has a production capacity of up to 30 bags per minute for 1 kg formats, with 2 hours of continuous production autonomy without changing consumable rolls. Operates at 400 V on a three-phase current, at a frequency of 50 Hz. Air supply pressure of 6 bar. Touchscreen control panel with GirBagger Smart System technology. Double supports for rolls of packaging material, two 300 mm feeding guides, connected to a dual-lane elevator (100 mm per lane) with a counter for avocados or citrus fruits per unit before packaging. Up to 640 pieces/minute and 48 bags per minute. Operates at 380 V, 50 Hz, with a power consumption of 1.10 kW. Stand-alone control panel with a touchscreen HMI, stainless steel chassis, and Bonfiglioli motors. Gedpfx Ae Ai Tgxsbiebw

Condition: excellent (used), Year of construction: 2007, Vacuum packaging machine VC999 07P, year of manufacture: 2007. Connection: 400V. Gbodpfx Ajf Srcfobiew Chamber dimensions approximately 88x50x15 cm, equipped with 2x CLFH 220 Rietschle vacuum pumps. Year of manufacture: 1998, power: 2x 5.5 kW. In very good condition, fully functional.

Year of construction: 2025, condition: like new (used), We offer a brand-new, ready-to-use pouch packaging machine, model HP-BP0520, manufactured by Quanzhou Huapai Machinery Co., Ltd, with a production year of 2025. Gbsdpfs Ahhbiex Abiew Manufacturer: Quanzhou Huapai Machinery Co., Ltd Model: HP-BP0520 Production year: 2025 Condition: Brand new Machine type: Pouch packaging machine Reason for sale: The machine was purchased new for our own food production facility. However, we have since modified our production technology, so the packaging machine has not been put into regular production. The equipment has only been operated during trial runs and is practically in new condition. The reason for the sale is solely a change in the production concept, and not due to any technical issues with the machine. If you have any questions or require further information, please send us a message.

Year of construction: 2012, condition: good (used), Angle sealer with shrink unit, vacuum packaging system, vacuum packaging machine, hood shrink machine, hood shrinker, film packaging machine -electronic temperature control -max. Pack size: 800 x 600 x 310 mm -Max. packaging weight: 18 kg -Dimensions: 1870/1010/H1200 mm -Weight: 212 kg Gedpfx Ajd H Nv Dsbisbw