Used Semi Automatic Bandsaw for sale (30,699)

Condition: new, Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Technical Data ● Cutting range: round flat square Hnsdjd Dpz Sspfx Ah Hjw 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm Material support height: 775 mm Dimension: 1700 x 1500 x 2100 mm Weight: 410 kg

Condition: used, Year of construction: 2025, functionality: limited functionality, The pallet wrapper works but needs a new board (circuit board). Hjdpfjwrcz Uex Ah Honw

Condition: used, Year of construction: 2015, functionality: unexamined, For sale: Semi-automatic capsule filling machine for capsule production. Currently set up for size 0 capsules, complete with a vacuum pump. Also included is a semi-automatic capsule counter that automatically counts out the set quantity of capsules while packaging is being placed. (Both machines are being sold together as an inseparable package.) The equipment has seen very little use (only for production testing) and has been stored in a warehouse for many years. I cannot fully guarantee the technical condition of the capsule filler; however, when connected to power, all motors run properly, but a full technical inspection is recommended. The capsule counter has been checked and operates correctly, quickly counting the specified quantity (in multiples of 5 pieces). Details below: Capsule Filler: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: DJ-C Semi-automatic capsule filling machine Hsdpfx Ahsw D Et Ds Hjnw Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 400V 50Hz (3-phase) Power: 3.1 kW Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: 135x70x160 cm Note: The capsule filler has visible dents on the housing (see photos) caused during transport, but the working elements are not damaged. Capsule Counter: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: HA-1 Capsule counting and filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 220V 50Hz (1-phase) Power: 60 W Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: approx. 150x70x50 cm The listed price is net. A VAT invoice is issued. For EU companies, 0% VAT for intra-Community supply. Assistance in organizing transport to the customer is possible. This is a courtesy listing; price and availability to be finally confirmed. The equipment is CE-marked (no manual or other documentation is included). We reserve the right to amend or withdraw the listing at any time without notice. This listing does not constitute a commercial offer as understood by commercial law.

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Hedpfx Ahjfh R Tuj Hsnw Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Year of construction: 2025, CORMAK BS530H Metal Band Saw – A Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal band saw is an efficient semi-automatic bandsaw designed for precise cutting of steel elements, pipes, and profiles at various angles. Its solid cast-iron construction, reinforced blade guidance system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all functions, significantly reducing operation time and improving workplace ergonomics. Key Advantages of the Machine Semi-automatic operation – hydraulic arm lifting/lowering and vise control via control panel. Worm gearbox with bronze components ensures smooth, vibration-free, and precise operation. Stepless cutting speed adjustment from 20 to 70 m/min – suitable for various materials. Carbide and ball-bearing blade guides for durability and precise blade tracking. Quick-release vise, manually or hydraulically controlled, adjustable left/right. Miter cutting range from -45° to +60° with precise angle scale reading. Heavy-duty cast-iron frame ensures cutting stability and long machine life. Hjdpfx Asw U Svlsh Hjnw Hydraulic feed rate control with adjustable return height of the saw arm. Construction and Technology The BS530H model features a reinforced drive system and industrial-grade hydraulics, ensuring reliable performance under intensive use. The massive frame construction minimizes vibration and ensures consistent cutting performance. An ergonomic control panel allows full process control from one location. The coolant system, integrated into the base, efficiently removes heat and debris, protecting the blade from overheating. Cutting Precision and Efficiency With stepless speed control, manual or semi-automatic operation modes, and a dial gauge blade tension meter, the BS530H delivers repeatable, high-quality cuts, even in long production runs. A material support roller and arm lock after the cutting cycle enhance operational safety and efficiency. Applications The CORMAK BS530H is dedicated to industrial production facilities, metalworking shops, and companies performing serial cutting of profiles, pipes, and solid steel sections. It’s ideal for serial manufacturing, prefabrication, and component preparation for welding or further processing. Standard Equipment Control console with semi-automatic functions Hydraulic vise Blade cleaning brush Coolant system with pump Front material roller Dial gauge blade tension meter CE certificate and technical documentation (DTR) Technical Specifications: Parameter Value Working height 965 mm Cutting speed 20 – 70 m/min Blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total power 3.0 kW Power supply voltage 400 V Dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: excellent (used), Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Hnodpfx Ajvyl Dveh How Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.500 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display. Standard equipment details - Double mitre 30° - 45° - 90° - 45° - 30° - Hydraulic full stroke vice - Saw frame mounted on preloaded linear guides - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3,0 kW - Modern control with plain text display and membrane keyboard - Freely positionable control panel - Large dimensioned hydraulic unit Hnjdpfx Ahsdyn H Te Hjw - Machine designed according to current CE standards and safety guidelines inclusive: Minimum quantity lubrication digital mitre gauge frame height adjustment at the control panel price on request

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! The Legend_600 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide. Hjdsfcdnlepfx Ah Hsnw

Condition: new, Year of construction: 2025, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: Hnjdpfx Aev Iqaxsh Hjw High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Hedpfsfibd Tox Ah Hsnw Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: used, functionality: fully functional, Useful cutting length 4000 mm blade diameter 4500 pneumatic head tilting Hodpfxswwm E Ie Ah Hsnw digital display for mobile head measurement

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Hnodpfx Ahjvyl Ihj Hsw Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.100 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Semi-automatic PET bottle blowing machine Hedpfx Aheugu E Rs Hsnw Manufacturer: FERENC Type: F-1400 Manufacture date: 2006 Capacity: about 800 pcs / h Number of molds in the machine: 2 Furnace dimensions: - length: 900 mm - width: 900 mm - height: 1200 mm Blower dimensions: - length: 1800 mm - width: 750 mm - height: 2000 mm Weight of the set: 1200 kg Technical condition: used machine

Year of construction: 2019, condition: new, SEMIAUTOMATIC BOOK COVER POSITION MACHINE LJ308A Hnsdpfsfdzwyox Ah How -new machine

Year of construction: 2023, condition: new, Machine fills packages automatically. Just insert the bag or pouch into the Bag in Box filler and pull the handle. After the package is filled, return the filling handle into start position and cap the bag. Capacity – 250 pcs. of 3 L bags/h Perfect for filling various liquids: from juice, wine, milk to broth, oil, soap, etc. Fills Bag in Box bags in sizes 1–30 L, Stand up Pouch packages in sizes 0,75–5 L. Suitable for both hot and cold filling. Machine fills both Bag in Box and Stand up Pouch packages with a tap. The filler can have an optional detachable buffer tank for hot filling. It is mounted conveniently on the side of the machine for better inspection and easier washing process. The buffer tank also reduces liquid foaming during hot filling process. The buffer tank has an integrated liquid level control inside for regulation of overspill and level in the tank. Buffer tank also comes with a connection to our pasteurizer. Error of volume repeatability is just ± 0,5 %. The filler pre-vacuums the bags and pouches before filling. Comes with touchscreen panel and multi-language menu. Easy-to-adjust filling table allows easily fill different volumes of Bag in Box & Stand up Pouch packages. Hsdpfxoflrius Ah Hsnw Working surface of the table consists of conveyor rollers which are easy to clean and help for the smooth slide of the bags and pouches. The filler is easy to clean after work with external and CIP cleaning. Our Bag in Box fillers work in perfect synergy with our Pasteurizers HEAT. They have a special connection between them which prevents liquid from overflowing and ensures easy work. We also offer fully automatic Bag in Box filler AUTOFLOW.

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from Hedpfxjfibfae Ah Hsnw

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 340 mm, infeed height: 80 mm, total length: 2,100 mm, total width: 1,780 mm, input voltage: 230 V, Semi-automatic machine for gluing wall calendars, intended for small and medium production runs. Additionally, the machine can be adapted for gluing notebook covers. Thanks to its compact dimensions, it is an ideal solution for production facilities with limited space. The CAL-one mini is equipped with a feeder that allows an 8 cm stack of covers to be placed, which are then automatically picked up for further processing. Glue is applied in designated spots on the covers using spray nozzles. Adjustable guides allow for manual insertion of calendar blocks or headers in a repeatable and stable manner. After gluing, the calendars are deposited onto an elevator. The delivery tray can hold approximately 20 cm of finished products. We also offer a fully automatic machine for gluing three-part and four-part wall calendars, the CAL-one 1200. Hedpjwu Hgyjfx Ah Henw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 50062, Siat WR100-M mobile robot wrapping pallets vertically, H2100, serial 50062, serial number FAMROBOTWR100, year 2006, with battery charger. This robot is in good working condition Equipped with key and 2 new batteries, new inductive side sensor. Weight: 350 kg Dimensions (L x W x H) 3.30 x 1.50 x 2.95 M Rotary plate 1500 MM DIAMETER Rotation 10 RPM DEPENDING THE SELECTED PROGRAM Reel MAX. 500 MM WIDE X 300 MM DIAMETER Film MAX. 1800 MM HIGH Pallet weight MAX. 2000 KG Pallet dimensions MAX 1000 X 1200 MM Power 1 KW MAST Hnedpfxow E Epbe Ah Hew Wrapping height up to: 2800 mm. PS HEAD Pre stretch 250% Film stretching from 1 m to 3.5 m. Stretching occurs in the head, not on the load photocell. NUMBER OF PALLETS / 1 BATTERY CHARGING up to 120 Euro pallets: H 1800 mm. WRAPPING FUNCTIONS: 4 programs programmable by the operator: Up-down cycle; Up-only cycle; Down-only cycle (you can set the starting height of the cycle); Cycle for attaching a foil hood. Adjustable number of wraps at the bottom of the pallet number of wraps at the middle of the pallet; Adjustable number of wraps at the top of the pallet; Adjustable wrapping speed up to a maximum of 83 m/min; Adjustable speed of the foil trolley rising and falling; Adjustable tension force via an electro-magnetic brake; Pre stretch 150, 200, 250% Video: Price Euro 3.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Clipping machine Manufacturer: Poly Clip Model: PDC 600 Semi-automatic double clipper Width: 1.000 – 1.100 mm Depth: 780 mm Height: 1.795 – 2.005 mm Weight: 118 kg Hodpfx Ahovy Trzo Henw Compressed air: 4 – 6 bar / 0,4 – 0,6 MPa Air consumption: 4 bar 6,5 NL/cycle Air consumption: 6 bar 8,5 NL/c S-Clip: S 625, S 628, S 632, S 638

Condition: refurbished (used), Divided into 30 parts Weight range: 32-70 g/pc. Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection head opened for cleaning condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 580 x 580 x 1350 Power (kW): approx. 0.74 Net weight (kg): 330 Hnedpfx Ahstt Am Uj Hsw

Condition: new, SIZES OF THE TABLES: Length: Min.800mm, Max.1600mm Width: Min.50mm, Max.150mm Hsdpohpbnnsfx Ah Henw Thickness: Min.10mm, Max.25mm (optional up to 100mm)

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. Hnedsfh R Tyopfx Ah Hsw The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Hnsdpefiulfsfx Ah Hsw Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.650+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Hnodpfxjg S Ui Ae Ah Hew

Year of construction: 2006, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on Kjeldahl method. Automatic, to analyse proteic nitrogen in raw material samples or processed material for food industry. Specific methods availables. Results complies with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty user free programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consume: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed door detection. • Digestion tube detection. Hjdofiliwjpfx Ah Henw • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies there is the possibility of selling in installments. Price Euro 4.000 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana