Used Ip55 for sale (187)

Condition: good (used), Year of construction: 2008, Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Gear motor: from crane system Verlinde VT202116 (functional) Rodpfjwpfmzjx Aa Esl -Type: MF11X-106N166P85006-IP55 -Handover/Price: in current condition as viewed -Case: Damage see photos -Power: 9 kW technical data see photo nameplate -Dimensions: 735/535/H340 mm -Weight: 103 kg

Condition: ready for operation (used), Brinkmann SFL1150/330-CM3+1841 pump with motor SN:1116020423 - 41314/2-IP 55F, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Rsdjt Sbmgopfx Aa Ejl

Condition: used, This listing is for 1 of 2 Watson Marlow 504u Mk2 Peristaltic Pumps These units are in full working condition and ready for immediate release. Rjdpfx Aaoxv Affo Eol The Watson‑Marlow 504U is a peristaltic (tube) pump designed for dosing, dispensing, or fluid transfer in laboratory, process, and industrial settings. Because of its design, the fluid only contacts the tubing, which helps with chemical compatibility, sterility, and ease of cleaning/maintenance. It features a fairly durable, washdown‑resistant housing (IP55) in many versions, allowing it to tolerate exposure to splashing or low‑pressure water jets. A few variants (e.g., “Mk2” or “Du”) bring updates in control, enclosure, and durability Other features: The manual for the 504Du version describes that the pump’s speed control ratio is 220:1, giving a minimum speed of 1 rpm (for the 220 rpm drive) and 0.5 rpm (for 55 rpm version). The pump is intended to be installed on a horizontal surface with good ventilation and free airflow around it. The pump allows for remote control / automation through a 6‑pin port for auto/remote operation

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Rsdpfxox Rkkus Aa Esl Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, geared motor type HSG5DFR/44D8556A-4 -Speed: 24.5 rpm -Power: 0.09 kW 1350 rpm -Design: B5 -Shaft: Ø 10 x 20 mm -Protection rating: IP55 -Dimensions: 245/130/H145 mm Rodpoqa I Hvsfx Aa Ejl -Weight: 4.2 kg

Condition: new, Siemens 1LE1001-1AB59-0FB4 - Z Low Voltage Motor - IP55 SN: 1858351001001, unused, 100% operational, scope of delivery as per photos, Z see nameplate. Rjdpfx Aasx Dvrnj Esl

Condition: used, functionality: fully functional, Pressure: 10 bar Capacity: 80 - 250 m³/h (1,333 - 4,167 l/h) Motor: 30 kW 50 Hz - 400/690 V - IP55 S1 2,900 rpm Rjdpfx Aex H S Dhea Eol

Condition: excellent (used), I am offering a complete industrial process pump with ATEX (EX) explosion-proof design, mounted on a robust steel skid frame. The unit is ready for immediate use in industrial installations, including hazardous (explosive) zones. Pump manufacturer: Victor Pumpen GmbH (Germany) Model: R40 KM6TM +2A / 88RF38+693De/6-K Electric motor: CEMP (Italy) • Power: 1.5 kW • Three-phase 230/400 V • 1,400 rpm • Protection class IP55 • Explosion-proof execution Ex d IIB T4 Gb • ATEX / IEC 60034 certification Gearbox: Siemens – EX version • ATEX Certificate II 2D c T120°C • IP55 • Gear oil: CLP VG 220 • Output speed up to approx. 72 rpm Rsdsx Ndbwopfx Aa Ejl Features and equipment: • Complete unit on mounting skid • Coupling guard • Connection flanges • Pressure gauge • Heavy-duty industrial construction • Excellent visual condition Applications: The pump is designed for transferring oils, fuels, resins, adhesives, solvents, and other process media. It is ideal for use in the chemical and petrochemical industries, paint shops, EX installations, and applications requiring continuous operation and stable pressure.

Condition: used, This listing is for a March May VSP-3 Vertical Spindle Pump. The unit is in full working condition and is ready for immediate release. The March May VSP-3 Vertical Spindle Pump is engineered for high efficiency and reliability, particularly in various industrial applications. Here are the key specifications and features: Features: Easy Refurbishment: The pump is designed for straightforward serviceability, making maintenance more accessible. Versatile Fluid Compatibility: Suitable for pumping a range of fluids, including water and various chemicals, which enhances its application scope. Durability: Constructed to withstand demanding conditions, ensuring long-term performance in various environments. Specifications: Motor Type: Standard IP55 rated motors, available in 415V or 230V options. Operating Frequency: 50Hz Power Rating: 0.09 kW Flow Rate: Capable of delivering up to 190 liters per minute. Head Height: Can achieve a head of up to 230 meters. Redpexxya Eefx Aa Eol Temperature Range: Designed to handle fluids from -30°C to +120°C.

Year of construction: 2002, condition: used, FRISTAM PUMP FM 252 C STAINLESS STEELMulti-stage centrifugal pump 30 m3/hHMT 70msuction diameter: 65 discharge diameter: 50Year 2002Engine 15 KW – 2900 rpm – 400/690v Rjdpex Rid Hjfx Aa Esl IP55Deported terminal block Mechanical seal

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: KEB, spur gear motor type G 1.2 C DK 63 G 4 /TS140 -Speed: 36 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm Rsdpfjwkr Afox Aa Eol -Protection class: IP55 -Dimensions: 345/125/H185 mm -Weight: 12.3 kg

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Rodpex Antuefx Aa Ejl Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 71500846002, power: 132 kW (179.47 HP), Technical data as per nameplate: Manufacturer: EMK / Sondermeier Elektromotoren Handels GmbH Type: KHL1G315M-4B3E3KR Motor number: 71500846002 Power: 132 kW Voltage: 400 V (delta connection Δ) Current: 241 A Frequency: 50 Hz Speed: 1435 rpm Mounting: B3 (foot mounting) Protection class: IP55 Insulation class: F cos φ: 0.89 Date of manufacture: 08/2022 Place of manufacture: Rain / Germany New price: approx. €6,200 Our price: only €2,800 Rjdpfxoxgtpis Aa Eol

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions Rjdpfx Aaewbqrte Ejl “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Find more new and used items in our store! International shipping costs on request!

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Rjdpfxoxv Ad Ue Aa Ejl Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Rodpfx Aajwm Ih Ao Eel Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor -Type: SK 62-180 L/4 i 11.59 -Speed: 127 rpm -Engine: Nord Type SK 180 L / 4 Rodjt Ddd Sjpfx Aa Eel -Power: 22.0 kW / 1450 rpm -Protection class: IP55 -Shaft: Ø 65 x 130 mm -Dimensions: 1030/430/H425 mm -Weight: 243 kg

Year of construction: 2022, condition: ready for operation (used), System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw length: 3000mm, conveying speed: 24m/min, drive power: 2.2kW, 3) Lifting-tilting device, with safety guard and safety light curtain, lifting capacity: approx. 500kg, tilting angle: 150°, discharge height: approx. 3390mm, container length/depth: 857mm, container width at discharge edge: 1060mm, container height: 916.5mm, container clearance height: approx. 255mm, container weight: approx. 135kg, max. container weight with product: 500kg, container volume: 0.5m³, lifting and discharge speed: 6.6m/min, motor power/rated current: 1.5kW/4.95A, transport chain: 2 pcs., safety chains/chain break protection: yes, chain breaking force per strand: 70,000N, operating hours reading: approx. 6400h. With complete documentation, additional spare parts are optionally available. An on-site inspection is possible. Rsdpfxex Dm A Rs Aa Esl

Condition: used, functionality: fully functional, Item: DP-6833-LKP-L-LobePump Alfa Laval Rotary Lobe Pump Type: LKP-L6246 Stainless Steel, Acid-Resistant Pump Type: LKP-L6246 Motor: 7.5 kW 1455 RPM 2 identical units available Alfa Laval Lobe Pump Assembly – Technical Summary Drive Configuration Motor Brand: ABB Model: 3GAA132-114 Power: 7.5 kW Speed: 1455 rpm (50 Hz) Voltage: 400 V / 3-phase Protection Class: IP55 Insulation Class: F Power Factor (Cos φ): 0.82 Gearbox Manufacturer: Benzlers (Made in Sweden) Model: BC247-03 Gear Ratio: 4.21 : 1 Output Speed: 1455 / 4.21 ≈ 346 rpm Oil Type: BP GR-XP 220 Mounting Arrangement: IM B3 (horizontal, foot-mounted) Rodpsxuqanofx Aa Esl Pump Section Manufacturer: Alfa Laval (Made in England, Eastbourne plant) Type: Rotary Lobe Pump (LKP-L6246 designation on pump casing) Connection: 4” sanitary fitting (inlet/outlet) Material: Stainless steel (acid-resistant) Typical Displacement: 1.5–2.0 L/rev (for 4” lobe size) Performance Data (Estimates) - Pump speed (post-gearbox): ~346 rpm (from 4.21:1 ratio) - Theoretical capacity: 31–41 m³/h (based on 1.5–2.0 L/rev) - Working pressure range: up to approx. 5–6 bar (limited by 7.5 kW drive) - Motor mechanical output (efficiency ≈0.85): approx. 6.4 kW available for pumping - Shaft power/torque: approx. 177 Nm at 346 rpm Ready for delivery!

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Rjdeixt H Nepfx Aa Ejl Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA37 DR63M4/TF/IS -Speed: 13 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Protection class: IP55 -Dimensions: 340/180/H140 mm Rsdpfom Dyg Tex Aa Eol -Weight: 11 kg

Condition: good (used), electric motor, three-phase motor Rsdpfxourn R Ej Aa Ejl -Manufacturer:Elmot-Schäfer, electric motor type ESHE 100LB-4 -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 370/250/H280 mm -Weight: 37 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake, frequency-controlled geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, variable speed geared motor with brake -Type R17 DT71D4/BMG/MM05 -Drive motor: with Movimod frequency converter -Speed: 290-64 rpm / i= 4.51 -Power: 0.055/0.55 kW Rsdpfsq U T Acsx Aa Eel -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Brake: 5 Nm -Number: 3x motors available Price: per piece -Dimensions: 430/145/H200 mm -Weight: 15 kg

Condition: good (used), Year of construction: 2004, Flat geared motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Defan, geared motor with drive shaft -Speed: 186 rpm -Transmission: Type NMRY090 i= 7.5 -Engine: Type YS100L2-4 -Power: 3 kW -Hollow shaft/shaft: Ø 35 mm / Motor shaft Ø 25 mm Dimensions see photos Protection rating: IP55 -Dimensions: 600/250/H330 mm Rjdexuf U Hspfx Aa Esl -Weight: 38.2 kg

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor, geared motor with brake -Manufacturer: Lenze, bevel gear motor -Transmission: Type G50BH121MVAR2C00 -Speed: 106.0 rpm / Torque: 65 Nm -Engine: Type M55AP080M045E00CTZ -Power: 0.75 kW / 50 Hz -Shaft: Ø 25 x 45 mm -Protection rating: IP55 -Number: 2x geared motors available Price: per piece Rodpfx Aaext Dnie Ejl -Dimensions: 490/160/H230 mm -Weight: 20.5 kg/pc.