Stretch Wrapper

Bang & Co BC-650 CA

Condition: new, The 40 MP is a single-head saw with top-down cutting action, featuring a saw blade diameter of ø 400 mm. Comparable to Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. The saw table can be manually adjusted to an angle of +/- 45°. The saw head can be manually tilted from 0° to 45° outwards. The 40MP single-head saw is equipped with horizontal clamping cylinders for secure profile clamping, minimal spray lubrication, and mechanical protection of the sawing area. Hodsrfapajpfx Afnonh Please also see our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Hnjdsk H Ic Ujpfx Afnsh Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (possibility to adjust device parameters or to purchase the vacuum lifter or jib crane separately) - Vacuum lifter for boards, suitable for handling MDF, laminated boards, raw boards, particle boards, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling boards - Actuator for rotation between vertical and horizontal positions - 6 suction cups Ø 200 mm Hnedjxln Drjpfx Afneh - Frame allows for adjustment of suction cup positioning to match the material being handled - Beam length: 2500 mm - Each suction cup is equipped with a ball valve for individual deactivation - Integrated air pulse function to prevent material adhesion - Individual X and Y axis adjustment for each suction cup - Control from the operating console (control panel): - Power on/off for the generator - Vacuum engagement/release - Thumb-operated control of the electric hoist – raising/lowering the lifter - Pressure gauge - Pneumatic supply – equipped with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under the jib: 3 m • Jib length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: any RAL palette colour on request • Manual slewing • Manual trolley • Quadruple/double needle bearing on the jib arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Electric hoist – single phase • Manual trolley • CE certification • Complete documentation Standard warranty: 12 months

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: • Daylight: 390mm daylight • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Hodji Igi Sspfx Afnsnh

Condition: good (used), Height: max 1,800 mm Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Hnodpfxeqqkx Ns Afneh Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 - Control system: S7

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Hodpfx Ajizkhvsfnjnh miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels Hodocggy Sopfx Afnsnh - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Year of construction: 2012, condition: good (used), machine/vehicle number: ENOG, DEMAG KBK crane headliner crane runway dimensions approx. 8x4m Payload / lifting load 250 KG - 0.25to Hnedpfx Afomqf Nfjnoh Technical data of the system: Crane runway made from Demag KBK1+2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DC-COM 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: new, Capacity, mm ----- 25 x 2 mm Hsdpfx Afoga T Exsnjnh Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Standard components conform to VDMA, ISO and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° Hnjdpfx Aodfgg Isfneh G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader