Used Scrap Shear Bailing for sale (1,855)

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Gtsdpfouddh Asx Afnsu Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Year of construction: 1980, condition: used, sheet width / mm plate thickness / mm distance between columns / mm Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons Gtodpjg Twmhjfx Afneu

Condition: used, To ensure the long-term performance, precision, and operational reliability of your sheet metal processing machines, it is essential to carry out regular maintenance, repair, and inspection procedures in accordance with manufacturer specifications and legal requirements. Our qualified service technicians perform these tasks professionally and reliably. These include: • Maintenance work to ensure uninterrupted operation (cleaning, lubrication, inspection and replacement of wear parts) • Repairs in case of malfunctions or breakdowns, including fault diagnosis, refurbishment, and adjustment • Inspections in accordance with DGUV Regulation 3 and the Machinery Directive to verify safety and performance Gjdpfx Afsygk Epjnjtu Upon completion of the work, you receive comprehensive documentation of all measures performed, including inspection reports and recommendations for any required follow-up actions. We will be happy to prepare a tailored quotation or schedule a maintenance appointment based on your specific operational requirements.

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm Gtsdpfxeq Dta Ij Afneu plate thickness . mm 8mm distance between columns . mm

Condition: used, Year of construction: 1974, round bar steel 63 mm Gtedpfx Afehxzmcjneu square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, weight of the machine ca. 16 t sheet width 3150 mm sheet thickness - max. 16 mm sheet width - min. 1,6 mm Gjdjx U A Hvspfx Afnetu voltage 400 V range - high tensile 3950x2475x2520 mm

Condition: used, functionality: fully functional, Year of construction: 2002, Pressure, tn: 50 Punching capacity: Ø40 mm. in 10 mm. Throat/reach: 250 mm. Flat bar: 300 x 15 mm. Round bar: Ø40 mm. Square bar: 40 x 40 mm. Angle iron: 120 x 120 x 10 mm. Notching unit: Triangular. Year: 2002 Country of origin: Spain. Size (L x W x H): 1900 x 1550 x 1750 mm. Weight: 1.400 kg. With toolholder for no. 6 and no. 8-40 tools, triangular notching station and 1000 mm. electrical length stop. Gedpfx Afexyxtaenstu All our used machines are tested and serviced before delivery.

Condition: new, Year of construction: 2026, Plate shears / guillotine shears 2500mm / 1.2mm NEW The stable construction creates an ideal prerequisite for precise cutting of sheets up to 1.2 mm thick. Available lengths are from 1.30M to 2.50M. Prod Masz machines are synonymous with precision and durability. Our guillotine shears meet all requirements for a precise cut with high productivity. Advantages: high cutting performance, stable steel construction, perfect, is made with the technology of CNC Technical specifications: - Max. Thickness of the cut sheet 1.2mm, - Max. Working width: 2500mm the equipment includes a stop for setting the cutting depth and a frame for holding the sheet Dimensions: Gjdpfx Afoc I T Rksnstu Length: 2900mm Width: 750mm Height: 1150mm Weight: approx. 600 kg Price: 7400 euros Delivery date: every week We look forward to your inquiry!!

Condition: new, Bernardo Hydraulic Guillotine Shear HST 1300 x 6 Technical Specifications Cutting length: 1300 mm Max. sheet thickness*: 6 mm Cutting angle: 2° Motorized backgauge: 0 – 700 mm Strokes / min: 16 Number of hold-downs: 1 pc. Table height: 850 mm Support arms: 3 pcs. Oil tank: 60 liters Motor power: 5.5 kW Length: 2070 mm Depth: 2040 mm Height: 1365 mm Weight: approx. 2020 kg * Material strength: 400 N/mm² Features • High reliability, safety, and cost-effectiveness • Robust, welded steel frame for torsion-free operation • Precise work thanks to integrated cutting line illumination with shadow outline • High operator safety via protective cover and photocells at the rear of the machine • Efficient cutting of various materials such as steel sheet, brass, aluminum, copper, etc. • Cutting via foot pedal, keeping hands free for optimal sheet positioning • Front support arms for easy handling of large plates • Simple gap adjustment via side-mounted lever Gtjdpfx Afeyg Hxfensu • Table support surface with integrated rollers, ideal for large workpieces • Automatic hold-down device for fixing the sheet Scope of Delivery • Cutting gap adjustment • Cutting line illumination • Motorized NC backgauge • Front sheet supports • Table support with integrated rollers • Side stop • Protective guard with photocells • NC control E21S • Foot pedal with emergency stop • Tool steel blades

Condition: new, Bernardo Hydraulic Guillotine Shear HST 1300 x 4 Technical Specifications Cutting length: 1300 mm Godpfx Asyg Hwnofnstu Max. sheet thickness*: 4 mm Cutting angle: 2° Motorized backgauge: 0 – 700 mm Strokes / min: 16 Number of hold-downs: 1 pc. Table height: 850 mm Support arms: 3 pcs. Oil tank: 60 liters Motor power: 5.5 kW Length: 2070 mm Depth: 2040 mm Height: 1365 mm Weight: approx. 1,970 kg * Material strength 400 N/mm² Features • Machines offer high reliability, safety, and cost-effectiveness • Sturdy welded steel construction ensures torsion-free operation • Precise working due to integrated cutting line illumination with shadow outline • High operator safety provided by protective guard and rear photoelectric sensors • Designed for efficient cutting of various materials, such as steel sheet, brass, aluminum, copper, etc. • Cutting via foot pedal allows hands-free sheet positioning • Front support arms for easy handling of large plates • Simple adjustment of the cutting gap via side-mounted lever • Table support surface with integrated rollers, ideal for large workpieces • Automatic hold-down for sheet fixing Scope of Delivery • Cutting gap adjustment • Cutting line illumination • Motorized NC backgauge • Front sheet supports • Table support surface with integrated rollers • Side stop • Safety guard with photo sensors • NC controller E21S • Foot pedal with emergency stop • Blades made of tool steel

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m Gsdpju Icppefx Afnstu further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm Gtedpfxsu Icqae Afnju round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m Gtjdpfxsvc Amts Afnju The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° Gtodsu Icn Eopfx Afnou cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, Technical details: Gjdpfxju Icqyo Afnotu cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. *

Condition: used, Year of construction: 1992, Technical details: Gedpfx Afeu Icnrsnetu sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal *

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible Gjdpfxju Icpco Afnetu - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Year of construction: 1988, condition: ready for operation (used), A hydraulic swing-cut sheet metal shear of our own construction is available. Cutting dimensions X/Y: 1000mm/500mm, max. sheet thickness: 12mm (15mm), machine dimensions X/Y/Z: approx. 3500mm/2000mm/2800mm, weight: approx. 10000kg. On-site inspection is possible. Godpfx Afsvhc Rvjnetu

Year of construction: 1997, condition: ready for operation (used), A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible. Gsdpfx Aewr Dwqsfnstu

Year of construction: 2013, condition: ready for operation (used), A guillotine shear Durma is available. Working width: 3100mm, max. sheet thickness: 13mm, stroke: 125mm, stroke rate: 13/min, oil capacity: 330l, machine dimensions X/Y/Z: approx. 4250mm/3850mm/2200mm, weight: approx. 11700kg. An on-site inspection is possible. Gjdpsxph R Tofx Afnetu

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Gtsdjwrhwuepfx Afnsu

Condition: ready for operation (used), A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg. Gjdpfx Aottv Tvsfnstu

Year of construction: 1990, condition: ready for operation (used), An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible. Gsdjuxdifspfx Afnjtu

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Gjdjya Hwzspfx Afnetu

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Gtjdpoxc Nikofx Afnou