Used Scragg Mill for sale (9,678)

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system. Laodpfx Amjtv H Ucjroc

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW Laodjtv Ia Topfx Amroc weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, spindle diameter 90 mm x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min table-size 1120 x 1000 mm table rotating 360 ° table load 2,5 t total power requirement 11 kW Lsdpfx Aotv Ibdsmroac weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, rapid traverse some tool holders, without facing plate, without steady rest,

Condition: used, Year of construction: 1995, x-travel 1200 mm y-travel 600 mm z-travel 600 mm table-size 1300 x 600 mm max. workpiece weight 2000 kg spindle taper ISO 50 spindle turning speed - stepless 30 - 3500 U/min feeds -stepless- 1 - 6000 mm/min rapid traverse 10 m/min power capacity - milling spindle 18 kW max. torque on the spindle 500 Nm distance work spindle /surface of the table 267 - 867 mm distance table-vertical head 58 - 658 mm voltage 380 V / 50 Hz control voltage 230 V total power requirement 22 kW weight of the machine ca. 6,5 t dimensions 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment Lodpfsvw Duhjx Amreac • electr. handwheel, • vertical head manually tiltable, • coolant device,

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 350 mm z-travel 140 mm table surface area 700 x 300 mm spindle taper ISO 40 spindle turning speed range 100 - 4000 U/min distance spindle center to column 395 mm Ledpfxotv Idxe Amrsac distance spindle nose and table min. 170 -max. 550 mm control TNC 407 milling feeds 3 + 2000 mm/min rapid traverse 5000 mm/min spindle drive 5,5 kW total power requirement 9 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407,

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Lodpfx Asza Egnjmrsac Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2011, number of spindle speeds 18.000 U/min Ljdpfszczhasx Amrsac NC rotary indexing table Ø 630 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm Ljdpfx Asb A Tagjmroac -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Lajdpfozfni Iex Amrjc Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: ready for operation (used), Year of construction: 1999, turning length: 600 mm, turning diameter over cross slide: 350 mm, rotational speed (max.): 3,500 rpm, Fanuc 21T Laedpfxszdiy Ee Amroc 3 axes C-axis for rotating tools 12-position turret chip conveyor tool set

Condition: used, CNC path control, computer, control unit, logic unit Heidenhain Type TNC 415 B / LE 415 B Logic unit LE 415 B, year of manufacture 1999 Item number: 267 223 49 Serial number: 5 667 843 S5 PC serial number: 252 415 01 NC serial number: 259 930-12 Lsdpfx Amszfqb Tsrjac Installed modules: - Computer board Type S4, item number: 268 553 01 / serial number: 5 615 221 - PLC graphics Type S3, item number: 257 954 03 / serial number: 5 556 573 A - Control loop board Type G3, item number: 275 705 02 / serial number: 20 232 905 C - Power supply, item number: 236 484 10, serial number: 5 600 157 / S4 - LE 415 B neutral, item number: 267 223 CC / serial number: 5 618 369 / S4 Housing dimensions L x W x H: 510 x 190 x 415 mm Weight: 11 kg Very good condition - functional guarantee

Condition: new, Year of construction: 2025, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 65 mm, rapid traverse X-axis: 1,200 m/min, rapid traverse Y-axis: 1,200 m/min, rapid traverse Z-axis: 1,200 m/min, total length: 800 mm, table width: 400 mm, overall weight: 1,550 kg, ELMAG Tool Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and cost-effectiveness, sure to impress any metalworking professional. This top ergonomic design offers easy operation, stepless speed control, and outstanding value for money, making it ideal for workshops, training centers, and toolmaking. Standard Features: - Digital position display - 4 long milling arbors: 16, 22, 27, 32 mm - 3 reducing sleeves: MK 1, 2, 3 - Operating instructions / CE certificate Advantages: - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw drive on all axes X/Y/Z - Infinitely variable feeds on all axes - Coolant tank integrated into the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED worktable illumination - Vertical milling head with adjustable quill - Includes central lubrication system - Digital spindle speed display - Rapid traverse on all 3 axes - Swiveling milling head +/- 45° - Swiveling control panel - Digital position display for maximum precision on all 3 axes - Spindle rotation clockwise and counterclockwise Ledpey Hlx Esfx Amrsac - Digital speed display - Potentiometer for stepless feed axis control - Selector switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop switch Technical Data: Drilling capacity in steel: 50 mm Face milling capacity: 125 mm End milling capacity: 40 mm Spindle taper: ISO 40 Speed range: 40 - 2000 rpm Speed settings: stepless Quill stroke: 65 mm Table T-slots / width × spacing: 6 / 14 × 63 mm Vertical table T-slots / width × spacing: 3 / 14 × 63 mm Spindle nose to column distance: 180 - 580 mm Table load capacity: 200 kg Milling head swivel range: ± 45° Spindle nose-to-table distance: 50 - 450 mm Horizontal spindle-to-table distance: 145 - 545 mm Milling table size: 800×400 mm Table travel X × Z: 500 × 400 mm Vertical table surface: 1020 × 225 mm Feeds X/Y/Z: 10 - 1200 mm/min Feed rates X/Y/Z: stepless Motor power: 3,700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Power supply: 400/50 V/Hz Machine dimensions: 800×400×450 mm Length × width: 1500 × 1700 mm Height: 2000 mm Weight: 1,550 kg The machine is located at our facility in 71334 Waiblingen-Beinstein, is available immediately, and can be inspected upon request. Please schedule an appointment in advance.

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,066 rpm, table width: 1,000 mm, table length: 6,100 mm, overall weight: 19,000 kg, 3-axis Newall display with variable feed rate 50-speed head with continuously variable spindle speeds, max. 1,500 rpm 6100 x 1,000 mm table 4500 x 1,000 x 1,000 mm stroke 19-ton weight Ledpfovz Aydsx Amreac

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 S Year of Manufacture: 1995 Operating Hours: 65,071 Control System: HEIDENHAIN TNC 426 Working Area X/Y/Z: 600 x 450 x 500 mm Spindle Speed Range: 20 - 6,300 RPM Tool Holder: SK 40 M & H 3D Probe (for workpiece probing) Vertical-Horizontal Milling Attachment Drilling Spindle Coolant System Rotary Table: 900 x 458 Lasdjv Rxa Sspfx Amroc Weight: 4,000 kg Machine Dimensions (L x W x H, approx.): 3,900 x 2,000 x 2,000 mm ä23626

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 H Year of Manufacture: 1995 Operating Hours: 46,680 Control System: HEIDENHAIN TNC 426 Travel distances X/Y/Z: 600 x 450 x 500 mm Rotary Table: 900 x 458 mm Renishaw 3D probe Spindle Speed Range: 20 to 6,300 rpm Tool Holder: SK 40 Coolant Tank Drive Power: 8.6 kW Ledpfx Amev Rpr Soroac Weight approx.: 4,500 kg Machine Dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 23626

Condition: used, Year of construction: 2000, x-travel 880 mm y-travel 630 mm z-travel 630 mm Lasdezfaxhepfx Amrsc weight of the machine ca. 8800 kg

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Laedpozauvfefx Amroc Feel free to view our other advertisements for a complete overview of our stock.

Condition: repair required (used), Year of construction: 2005, operating hours: 20,000 h, functionality: not functional, Machine Type: CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type: GMX 200 linear Year of Manufacture: 2005 Control System: Siemens 840 D powerline Location: Ober Ramstadt Technical Details Turning Diameter: max. 560 mm Turning Length: 1,070 mm Control System: Siemens 840 D powerline Distance between Spindles: 1,000 mm Main Spindle: Max. Speed: 5,000 min/-1 Drive Power - Main Spindle: 25 / 37 kW Lasdpfxjzd Dw Eo Amroc Max. Torque: 390 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Chuck Diameter: 200 - 315 mm Milling Spindle: Speed: max. 12,000 min/-1 Drive Power - Milling Spindle: 13.2 / 22 kW Max. Torque: 100 Nm Tool Interface: capto Holding Torque: Y-Axis: +/- 80 mm B-Axis: +/- 120 ° C-Axis: 1 ° X-Axis Travel: 485 mm Bearing Diameter: 80 / 55 mm Counter Spindle: Max. Speed: 5,000 min/-1 Drive Power - Counter Spindle: 25 / 37 kW Max. Torque: 320 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Max. Chuck Diameter: 315 mm Tool Magazine: Number of Tool Positions: 46 pos.HSK 63 A Tool Interface: Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Neighbor Position: 150 mm Max. Tool Length: 300 mm Total Power Requirement: 75 kVA Machine Weight Approx.: 14.0 t Space Requirement Approx.: 8.0 x 4.5 x 3.1 m Accessories Documentation: Chip Conveyor: Coolant System: 8 / 20 bar C-Axis: B-Axis: Y-Axis: Tool Magazine: Counter Spindle: Milling Spindle:

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. Lsdpfsuf Sv Djx Amrjac The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: used, inner taper of milling spindel / collet diameter / Laedpfx Amezcq H Ejrsc turning speed range / U/min

Condition: used, inner taper of milling spindel / collet diameter / turning speed range / U/min Ljdpfx Aszcq Hromrsac

Condition: not inspected (used), Year of construction: 2001, operating hours: 31,782 h, functionality: unexamined, overall weight: 5,500 kg, Without tools Ljdpfx Amszbqg Njrsac

Condition: used, Year of construction: 2010, control Siemens Sinumerik Laodpfszd Hfrjx Amrsc spindle tunring speed 10.000 U/min engine 15 KW weight 11.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dividing head, 4th/5th axis Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 500 mm z-travel 540 mm Control Heidenhain TNC530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 24 Pos. Number of working hours ca. 41.344 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel Lajdpfx Aozd Hfljmroc - Chip conveyor - Coolant system - Machine documentation - Control system documentation - 3D probe - Air purifier - Tool setter Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Ledpfx Aex Iwg Rsmrsac Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!