Universal tool milling machine

DECKEL FP 2

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Redpjwid Spefx Aa Esl Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Rjdpfspy Eldjx Aa Eol Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V Rsdsx Ndbqopfx Aa Ejl total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Redpfx Aoihf Etoa Eel For more information or to contact us, please visit our website

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR Rodpfsiqkc Iex Aa Eel year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: ready for operation (used), Year of construction: 1973, Deckel FP2 tool milling machine with 3-axis digital readout. The machine is in operational condition. Rigid table, SK 40 spindle taper. Accessories: various collets and milling arbors, tailstock support, vise, operating manual. Defects: one axis of the digital readout does not count, table has breakouts. Can be demonstrated under power by arrangement. Redpfx Aox Nclhsa Esl

Condition: used, x-travel 500 mm y-travel 200 mm z-travel 400 mm table surface area 700 x 300 mm Rodpfx Aox Hay Dja Esl tool taper SK 40 - S20 feed 8 - 400 mm/ min rapid traverse in X und Z 1200 mm / min turning speeds 40 - 2000 U/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 Rjdpfxsr En Dyo Aa Eel with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, Machine is in good condition! Tool holder: SK 40 travels X/Y/Z: 500 / 200 / 400 mm speed range: (18 steps) 40 - 2000 rpm spindle stroke vertical: 60 mm spindle stroke horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 300 mm Rodsilg H Eepfx Aa Eol motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg space requirement LxWxH, approx.: 1200 x 1250 x 1670 mm head swivels: 90° / 90 Equipment: - 3-axis digital display - Coolant device We would be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: like new (used), I'm selling the German milling machine Deckel, model FP2A, shown in the photos. The machine is in perfect, like-new condition. It has seals on the controller. It's ready to work. I can provide on-site loading. Rodsxq Rymepfx Aa Ejl Machine data -Controller Dialog 11 -Speed ​​0-4000 -X 300 -Y 300 -Z 400 Complete documentation, including: Machine manuals Programming manuals Error log with descriptions Machine data Electrical diagrams The machine comes with a tool kit: -2 150x300 vices -3D workpiece measurement probe -Tool length measuring device -ER 32 tool set -Arbors -Milling head

Condition: new, Year of construction: 2025, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder Rjdpoh Su Ipsfx Aa Esl - etc. Further technical data can be found in the attached data sheet.

Condition: good (used), Dimensions: width 2000mm, depth 2000mm, height 1600mm Table: 620mm x 390mm Machine weight: approx. 1500kg Control: Dialog 4 Rodpfxou A Iuyj Aa Eol Equipment: backlash-free ball screws, hydraulic SK40 tool holder, electric handwheel

Condition: excellent (used), feed length X-axis: 400 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, For sale is a conventional milling machine of the brand Deckel and type FP2 The machine is in very good condition, has been overhauled by the Harich company (date unknown) and is ready for immediate use Technical data Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Redpfxsu Ti Aks Aa Esl Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Vice and tools are NOT included in the offer, but can be offered. On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet Rjdevfdatepfx Aa Esl - CE declaration of conformity

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Redpfjuuh Suox Aa Eol Dimensions: 38*68 cm Height: 25 cm