Used Scm Si 16 W for sale (651)

Condition: excellent (used), Year of construction: 2020, Equipment: Manual adjustment of the milling spindle with digital display Milling fence with crank adjustment of the fence jaws and digital display Electrical preparation for feed mechanism Speed indicator Right/left rotation of the milling spindle with electrical locking during switching Automatic motor brake CE conformity declaration Kdjdpfx Ae Aayg Eokpou Technical data: Spindle extension length 140 mm Milling spindle diameter 30 mm Spindle speeds 3000/4500/6000/7000/10000 rpm Overhang of the spindle base from the table 5 mm Dust extraction port diameter 2 x 120 mm INCLUDED OPTIONS: - Milling fence with crank adjustment - Aluminum fence jaws instead of the wooden fence jaws on the milling fence - LL version with 2 cast iron table extensions, length 2500 mm - Motor power: 7.0 kW, 400 V, 50 Hz Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claim. The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Cutting size 3300x2200mm + back loading table. Cutting height 67mm. Main motor 9,0 kW Kdedpfxjz Suv Hj Akpsu Scoring motor 1,3 kW Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Side alignment with pneumatic stroke. Wincut optimising software included. Very good condition. Available immediately.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS Main saw blade diameter: 315 mm Maximum tool diameter: 315 mm MACHINE DETAILS Circular saw blade units: 1 Kdodpeyqyc Eofx Akpju Connected load: 4 kW EQUIPMENT Scoring unit Tilting function CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8118

Condition: used, Year of construction: 2015, Four-knife 120 mm cutterblock Four selectable feed speeds Heavy cast iron construction Precision thicknessing table with central column guidance 520 mm working capacity Kodez N Hfbopfx Akpodu 2015 CE

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min Ksdpfjg Umrmsx Akpsdu 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, total width: 2,200 mm, total height: 2,680 mm, total length: 2,200 mm, Year of manufacture: 1999 Colour: Grey Empty weight: 1.900 kg Wide belt sander SCM Sandya 10S M2 110 Built in 1999 Sanding belt dimensions 2620x1115mm 380V 1st sanding unit Contact roll 180mm Engine 18.5kW 2nd sanding unit Combi aggregate with sanding pad Engine 11kW Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput speed 4.5-9 m/mins Dimensions 2300x2205x2500mm, weight 1850kg - Year: 1999 - CE marking present: Yes - Serial number: 101513 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Bottom - - Type of unit: Contact roller - - Sanding belt length [mm]: 2500 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 180 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Bottom - - Type of unit: Combi - - Sanding belt length [mm]: 2620 - - Sanding belt width [mm]: 1115 - - Roller diameter [mm]: 180 - - Roller material: Steel Kdedpfx Aez R A U Uskpju - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Infeed table length [mm]: 350 - Outfeed table length [mm]: 375 - Feed motor [kW]: 1.5 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 2200mm x 2200mm x 2680mm (l x w x h) - Transport weight [kg]: 1900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile . and other models second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000 Kdodovzghrjpfx Akpsu

Condition: used, machine/vehicle number: 008019, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Kdsdewvq E Nspfx Akpju Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 14 nr

Condition: used, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Year of manufacture: 2012 Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Kjdpfxownhccj Akpsdu Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Details: - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. For sale due to new acquisition. Kodpfxez Rzyvs Akpedu

Condition: new, Year of construction: 2025, heavy-duty construction with cast iron table smooth movements using hand lever and handwheel eccentric clamping device dowel drilling unit with 16-22-25-32 mm grid 2 spindle speeds: 1500/3000 rpm WESCOTT drill chuck 1 - 16 mm Kdedpfx Asycg U Ejkpju CE compliant Work table dimensions: 287 x 550 mm Longitudinal travel: 200 mm Vertical travel: 160 mm Cross travel: 125 mm Three-phase motor power: 1.8 kW, 400 V, 50 Hz

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Kdedpfx Akjz Nggrspou

Condition: excellent (used), CATALOGUE NUMBER: 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between extreme spindles: 900 mm - Spindle spacing pitch: 32 mm - Table surface area: 700x1220 mm - Height to table: 930 mm - Pneumatic clamps: 3 pcs - Vertical and horizontal drilling + angled drilling - Pneumatic table adjustment for vertical and horizontal operation - Pneumatic lifting of the drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES – Made by the Italian brand SCM Kdsdpfozwpaxox Akpeu – For 29 drills – Unpainted – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1370 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to significant fluctuations)

Condition: new, Year of construction: 2025, Woodworking Machines, Table Saws, Minimax twf55 es Article number: 5502261 Stable steel and cast iron construction Anodized aluminum format sliding table Large-sized cast iron milling head, swiveling up to -45° backwards Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Display for height and inclination, accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arc milling hood included Made in Italy Dimensions and Weights Length (product) approx. 1200 mm Width/Depth (product) approx. 2000 mm Weight (net) approx. 510 kg Dust extraction connection Kjdpji Dphtsfx Akpsdu Dust extraction port diameter 2 x 120 mm Work table Work table length 1200 mm Work table width 530 mm Table height 900 mm Sliding table length 1200 mm Sliding table width 360 mm Sliding table height 142 mm Installation information Space requirement length 2800 mm Space requirement width/depth 2910 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1200 mm Machine body width/depth 846 mm Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Power of drive motor 5.0 kW Milling spindle Spindle inclination 0 to -45° Usable spindle length 125 mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30 mm Milling tool diameter max. Tool diameter max. 240 mm Tool diameter max. with lowering 230 mm Tool diameter max. for profile milling 240 mm Tool diameter max. for mortise milling 320 mm EQUIPMENT Equipment Aluminum sliding table ✔ Milling fence Heavy-duty professional version with hold-down, protective cover and aluminum milling fence cheeks Telescopic miter fence with two folding stops Extension table ✔ Arc milling protection hood ✔ Eccentric clamp ✔ Handle on the sliding table ✔ Spindle height adjustment manual Spindle inclination adjustment manual Control manual height and swivel adjustment of the milling unit Position of control elements on the machine body Location: In stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), functionality: fully functional, working width 500mm 4-knives shaft classic knives tables length 2250mm electric adjustment of thicknesser table weight 850kg Kdodps Aay S Ijfx Akpou

Condition: excellent (used), functionality: fully functional, working width 520mm 4-knives shaft delta/star start mechanical table regulation variable regulated feeder shaft speed 4500 RPM Kdedpfxs Aaznds Akpeu roll in the table

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: - working width: 240 [mm] - working height: 120 [mm] Kdodoizxf Hspfx Akpsu - number of spindles: 6 - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Planer in very good condtion. First owner!

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Kjdpfx Ajv S Uz Ijkpedu Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: excellent (used), SCM Sintex XL Four-Side Planer Working width: 23-180 mm Working height: 6-100 mm Number of spindles: 4 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Left Top Minimum length of workpiece: 300 mm Spindle diameter: 35 mm Kdedpfx Akow Hbf Iepeu Feed speed adjustable by inverter: 4-12 m/min Technical documentation CE certificate

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Kedpfxjhp Rc Ij Akpodu Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of axes: 5, spindle motor power: 8,500 W, CNC Wood Machining Centre manufactured in 2005. This SCM Record 110AL features a working area of 3,060 mm in the X-axis and 1,240 mm in the Y-axis, with a maximum panel passage of 200 mm. It includes 18 total drilling spindles and a powerful 8.5 kW main electrospindle. If you are looking to get high-quality drilling and milling capabilities, consider the SCM Record 110AL machine we have for sale. Contact us for further details. • Processing type: Drilling and milling • Max. panel passage: 200 mm • Number of working fields: 2 • Table type: Flat table • Table configuration: Nesting • Table dimensions: 3,060 × 1,240 mm • Number of controlled axes: 5 • Drilling units: 1 • Vertical drilling spindles: 12 • Horizontal drilling spindles, X-direction: 4 • Horizontal drilling spindles, Y-direction: 2 • Total drilling spindles: 18 • Milling spindles: 1 • Milling spindle controlled axes: 5 • Spindle cooling: Liquid cooling • Grooving units: 1 • Grooving unit: Fixed, X-direction Ksdez Iy N Nspfx Akpjdu • Main electrospindle power: 8.5 kW • Milling spindle power: 8.5 kW • Control: PC Control • Programming software: Xylog Plus • 16-position tool magazine • Automatic tool changer • CE marking Additional equipment • Vacuum pump: 1 (suction capacity 250 m³/h) • Suction cups for workpiece clamping • Front safety mats

Condition: used, Year of construction: 2018, total width: 1,899 mm, total height: 2,264 mm, total length: 2,580 mm, working width: 1,350 mm, grinding width: 1,370 mm, overall weight: 1,890 kg, table height: 900 mm, Wide-belt sanding machine Manufacturer: SCM GROUP spa Brand: Casadei Type: Libra 55 RTC 135 Year of manufacture: 2018 Weight: 1,890 kg Technical specifications: Max. working width: 1,350 mm Working height (adjustable table): 4 to 170 mm Working height (optional fixed table): 4 to 200 mm Sanding belt width: 1,370 mm Sanding belt length: 2,620 mm Feed rate: 3 stages: 4, 5, and 9 m/min Power of feed motor: 0.45 / 0.8 kW Power of main motor: 11 kW (15 hp) Purchase price net: €30,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing available Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Kdodpfx Aez Ippxokpsu Subject to changes, errors and prior sale.

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine is in process of partial reconditionning at our facility at the moment. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Electronic vertical and horizontal positioning 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Kdsdpfx Aozq Hiqjkpeu Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Dust ...

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Kdedpfx Aoz Iqqkjkpsu Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm Kdjdpfx Aocnwydskpju With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -