Used Scm Si 15 Wf for sale (570)

Condition: excellent (used), working width 180mm working height 120mm Fsdpfew Ad H Hsx Ad Nepp 4 heads two axes heads regulation spindles diameter 35mm two feeding speed delta/star start electric regulation of pressure beam no tools included

Condition: used, Technical data: Max planing width: 230 mm Fpsdjmiik Tepfx Ad Nep Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: good (used), Technical Specifications: • Minimum panel width: 55 mm • Minimum panel length: 140 mm • Panel thickness (min/max): 10 - 60 mm • Edge thickness: 0.4 - 3 mm • Maximum strip thickness: 12 mm Components and Functions: Composition Grinding units eeders End trimmers Trimmers Corner rounders Fpjdpfx Adji E S Rlj Nop Edge scrapers Brushes

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA10001621, travel distance X-axis: 3,086 mm, travel distance Y-axis: 2,185 mm, travel distance Z-axis: 150 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 3,770 mm, feed length Y-axis: 2,585 mm, feed length Z-axis: 250 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, nominal power (apparent): 29 kVA, controller manufacturer: SCM, workpiece height (max.): 150 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 24,000 rpm, overall weight: 2,550 kg, spindle speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, distance between spindles: 32 mm, spindle motor power: 9,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 160 mm, tool diameter: 160 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, SCM MORBIDELLI N100 22-31 C – CNC Milling and Drilling Machining Center Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001621 Year of Production: 2019 Condition: Excellent Location: Croatia Technical Specifications: Fjdpowtdt Uefx Ad Nepp Working Area (X x Y x Z): 3086 x 2185 x 150 mm Vacuum Table: High Efficiency Multipurpose Aluminum Table (HE) Vertical Drilling Head: 12 Spindles (7X / 5Y), 8000 rpm Horizontal Drilling: 3 Units (2X + 1Y), 8000 rpm Integrated Saw (X-Axis): Ø125 mm, 10000 rpm Main Milling Spindle: 9.5 kW (13 HP), HSK 63F, 24000 rpm Tool changer: 20 positions (19 at the rear + 1 in the cabin for quick change) Vacuum pumps: 2 x 250/300 m³/h Dust extraction: 5300 m³/h + 3400 m³/h for unloading pusher, Ø250 mm Machine weight: approx. 2550 kg Total installed power: 23–28.5 kW Control and software: Control via Xilog Maestro system + Eye-M PRO console Industrial computer with Windows Embedded 7 operating system 21.5" touch screen Included nesting optimization module and additional software licenses Built-in accessories: 1. Automatic tool length measuring device 2. TECPAD remote control with 7” touch screen 3. Lateral pick-up for additional tools 4. F18L doweling machine with RO-AX system 5. Two-field positioning for work in two working zones (A + D) 6. Automatic central lubrication 7. Air blowing and micro-lubrication system for processing demanding materials (e.g. aluminum panels) 8. Vacuum cup set 9. Automated unloading system: pusher + conveyor belt 10. Predisposition for automatic loading device 11. Interpolating vector axis with digital control for the 4th axis The machine has been used exclusively in professional conditions, regularly maintained and fully functional. Ready for immediate use in industrial production.

Condition: ready for operation (used), Four-sided planer SCM P64 profiler Specification: • condition - after inspection, ready to work • manufacturer - SCM • model - P64 • working width - 180mm • working height - 120 mm • motors on vertical spindles - 1 x 5.5 kW • motors on horizontal spindles - 4.0 and 5.5 kW • feed motor - 1.5 kW • total power 16.5 kW • electric adjustment of planing height • manual adjustment of planing width • 4 spindles of 35 mm diameter • 4 segment heads included • vertical profiling heads, adjustable up/down (as in a low-spindle milling machine) • long insert table with dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • roller pressure on springs • pump for lubricating the table top • extraction nozzles fi 120 and 150 mm • weight - approx. 1110 kg • dimensions 332 x 113 x 170 cm (length x width x height) Additional information: Fodpfjwigg Ajx Ad Nspp • the machine is in good technical condition, ready for immediate use • the photos show the actual condition of the item for sale • the machine is available immediately

Condition: excellent (used), SCM Machining center Fpjdpfewmxkujx Ad Nop

Condition: ready for operation (used), Maximum planing width: 230 mm Maximum planing height: 120 mm Fedpfx Aewh Szvjd Nspp Spindle diameter: 40 mm 4 heads plus one universal head Head configuration: Bottom, right, left, top, universal Motor power: 4 kW (bottom), 5.5 kW (right), 4 kW (left), 4 kW (universal) Spindle rotation speed: 6000 RPM Table lubrication Electric height adjustment (up/down) Two feed speeds Year of manufacture: 1999 Weight: 2320 kg Voltage: 400 V

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 140 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom 5.5 kW right + left 11 kW top 7.5 kW Fpjdpjqv Awijfx Ad Nsp feed 3 kW Manual adjustment of all heads Number of top steel pulling rollers: 4 Number of top rubber pulling rollers: 1 1 rubber roller in the top Extraction spigot diameter: 130/150 mm Infinitely adjustable feed rate: 4-26 m./min Feed on gimbals Working table lubrication pump Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Overall dimensions: Length: 4180 mm Width: 1720 mm Height: 1740 mm

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, Four-sided planer/moulder with 6 spindles, fully refurbished in 2025 (zero operating hours post-refurbishment), manufacturer SCM, Superset model. This professional industrial equipment delivers high-precision solid wood processing, ideal for workshops or factories seeking superior performance and long-term reliability in solid wood machining. The machine represents a modern technological solution, originally manufactured in 2003 by renowned Italian producer SCM, and brought up to current standards through a thorough refurbishment—zero operating hours since overhaul. We guarantee quality and operational safety, comparable to a new machine. Main technical specifications: Maximum working width: 240 mm (adjustable from 15 mm) Maximum working height: 160 mm (adjustable from 10 mm) 6 independent processing spindles, each with its own motor and electronic braking First lower horizontal spindle: 5.5 kW, Ø 40 mm, 8300 rpm Right vertical spindle: 5.5 kW, Ø 40 mm, length 170 mm, 8300 rpm Fpjdpfx Asw Emlwed Nep Left vertical spindle: 5.5 kW, Ø 40 mm, length 170 mm, 8300 rpm Upper horizontal spindle: 11 kW, Ø 40 mm, length 170 mm, 8300 rpm Second upper horizontal spindle: 13.8 kW with inverter, Ø 40 mm, length 170 mm, 10,000 rpm Second lower horizontal spindle: 5.5 kW, Ø 40 mm, length 240 mm, 8300 rpm Feed System: Cardan shaft transmission, each unit equipped with its own feed roller and universal joint Feed motor: 4 kW with electronic brake Continuously variable feed speed with frequency inverter: 6–30 m/min Upgraded electric cabinet with advanced safety systems and improved ergonomics for easy operation and maintenance. Main advantages: High precision and versatility for ripping, planing, and profiling solid wood, regardless of complexity Reliability assured by complete refurbishment and premium-quality components Optimized cost compared to new equipment, with no compromise on performance Financing option: 5-year leasing for flexible investment management Recommended applications: Production of tongue and groove boards, solid wood flooring, beams, battens, planks, mouldings, and other solid wood products Ideal for carpentry workshops, joinery factories, manufacturers of doors, windows, furniture, industrial production of finished lumber

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Fsdow Idc Rspfx Ad Nopp Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: repair required (used), Four-sided planer SCM P64 profiler Specification: • condition - for inspection, requires maintenance and minor repairs • manufacturer - SCM • model - P64 • working width - 180mm • working height - 120 mm • motors on vertical spindles - 1 x 5.5 kW Fpjdswgdfqjpfx Ad Nop • motors on horizontal spindles - 4.0 and 5.5 kW • feed motor - 1.5 kW • total power 16.5 kW • electric adjustment of planing height • manual adjustment of planing width • 4 spindles of 35 mm diameter • vertical profiling heads, adjustable up/down (as in a low-spindle milling machine) • long insert table with dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • spring-loaded roller pressure • tabletop lubrication pump • 120 and 150 mm extraction nozzles • weight - approx. 1110 kg • overall dimensions 332 x 113 x 170 cm (length x width x height) Additional information: • the machine requires inspection, it can be started but requires inspection, maintenance, replacement of bearings, etc. • the photos shown show the actual condition of the item for sale • the machine is available immediately

Condition: excellent (used), SCM P64 four-sided planer Fodpfx Adjvafdpj Nepp Technical specifications: Max planing width: 190 mm Max planing height: 120 mm Diameter of the spindles: 35 mm Number of spindles: 4 Order of spindles: bottom 5.5 kW right + left 5.5 kW top 5.5 kW Gear pulling shafts: 3 Extraction spigot diameter: 150 mm Feed on gimbals Working table lubrication pump Electric lifting of the body Power supply: 400 V Overall dimensions: Length: 3500 mm Width: 1230 mm Height: 1730 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 613 h, functionality: fully functional, machine/vehicle number: AH00001133, feed rate X-axis: 18 m/min, power of the buffing unit: 260 W, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, power of the milling unit: 1,500 W, overall weight: 1,746 kg, type of input current: AC, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 415 V, power: 20 kW (27.19 HP), input current: 48 A, input frequency: 50 Hz, Manufacturer: SCM Model: Olimpic K560R Year:2019 Condition: Excellent. Lightly used and currently used in manufacturing Availability: End Oct 2025 Location: Northern Ireland Financial Information: VAT: This will be charged to UK companies only Duty: There is no customs or duty selling into the EU from Northern Ireland Price: This is as seen and does not include preparing the machine for transport. This is a fixed price. There are no further discounts available. Machine Specification: If you want to run Airtec (Airfusion) PU and EVA then this is the machine for you. This is a fully specified K560 with many extras. Everything you need to put it into production quickly is included. Please read the full description. Track Speed 12-18mm Panel Thickness 8-60mm Max Edge thickness Strips 6mm Max Edge Thickness Coil 3mm Coil plate diameter 780mm Distance between two panels 600mm Min Panel Length 140mm Min Panel Width 100mm Work height 900mm Machine length: approx. 4950 mm Fpedpfx Aew Nyqajd Nop Autoset: Automates the machine set up when changing work (e.g. changing from 1st to 2nd passage) Pre-Milling: 2 off high freq motors Max removal 3mm Infra-red Ceramic Lamps: The heat the panels before gluing AAR anti-adhesive unit: Prevents adhesive sticking to the upper and lower panel surfaces SGP - Special Glue Pot: Machine configured for BOTH EVA and PU glue Airfusion +E unit: Hot air application of pre-coated edge band to avoid the use of glue K/SEL end trim unit: 2 high freq motors 0-15 deg adjustment of cutting angle RK trimming unit: 2 high frequency motors ROUND X Rounding unit: Twin high frequency motor corner rounding RAS/K edge scraping unit: For rounded edge scraping post machining RCV glue scraping unit: Top and bottom scraping to remove excess edge band and glue SPV brushing unit with spray: removes glue and polishes edging and boar Spray mist device for delicate edges: Allowing the processing of high gloss edging StarTouch electronic control: Touch sensitive control panel Optional extras: Leitz pre-milling tooling blocks – Brand new – never used -€1000 Ducting – The ducting to connect to the extraction - €2500 - We recommend purchasing this. Extraction system to suit €2500 Compressors to suit €2500 each

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. If customer wishes it can be seen working. Fpodpfx Aoxn Um Sod Nop

Condition: used, Wide belt sander SCM Sandya 10S M2 110 Fpodpownh A Asfx Ad Nop Built in 1999 Sanding belt dimensions 2620x1115mm 380V 1st sanding unit Contact roll 180mm Engine 18.5kW 2nd sanding unit Combi aggregate with sanding pad Engine 11kW Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput speed 4.5-9 m/mins Dimensions 2300x2205x2500mm, weight 1850kg - Documentation available: No - Number of units [pcs]: 2 - └ Unit 1: - - Type of unit: Contact roller - - Roller diameter [mm]: 180 - - Motor power [kW]: 18.5 - └ Unit 2: - - Type of unit: Combi - - Sanding belt length [mm]: 2620 - - Sanding belt width [mm]: 1115 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used machine with fixed spindle Table 830 x 700 mm Spindle vertical travel 150 mm Spindle diameter 30 mm Fedpfx Adsxvt E No Nepp Spindle speeds 3500 - 7000 rpm Grooving discs up to 340 mm Motor 2.5-3.1 HP with Aigner integral fence with 3-roller power feed Weight: 240 kg Availability: approx. mid-April 2026 Storage location: Wetterau

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: PRATIX Z2-27, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, overall weight: 2,000 kg, spindle speed (min.): 24,000 rpm, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Description TECHNICAL SPECIFICATIONS PRATIX Z2-27 AXES Usable working area X-Y-Z * 2,700-1,300-180 mm Axis travel X-Y-Z 3,060-1,735-250 mm Vectorial speed X-Y 60 m/min WORK TABLE Type MF Alu grid table 1,225 – 2,750 Vacuum pump Becker 250m3 DRILLING UNIT F12 Vertical drills No.-rpm 12 (7X-5Y) – 4,000 MILLING MOTOR Power kW (HP) 7.5(10) Fsdpfexgdc Hsx Ad Nepp Min - Max spindle speed rpm 1,500 – 24,000 Tool magazine in table No. 10 positions Installed power KVA 23÷28.5 Total machine weight 2,800 kg Price excluding VAT and tools

Year of construction: 2008, condition: ready for operation (used), Table Table Length 2500 mm Main Drive Fpjdpjxvty Tjfx Ad Nsp Spindle Speed 8300 RPM This SCM Superset NTE was manufactured in 2008. A robust used profile milling machine featuring a touchscreen operation, 6 spindles including a UNIWELLE, and a spindle speed of 8300 rpm. It offers a working width up to 240 mm and includes a quick-change spindle system with Powerlock HSK 85. Ideal for detailed woodworking with its comprehensive tooling and motor-driven feed rollers. Contact us for more information about this machine. Application Types Milling (Wood)

Year of construction: 2016, condition: excellent (used), Thickness planer Manufacturer: SCM Fpodpspr U D Sjfx Ad Nop Type: S52 Elite S Year of construction: 2016 Working width: 520 mm Max. Plane thickness: 240 mm Power: 7 kW Feed rate: 5 / 8 /12 /18 m/min Number of knives: 4 Blade type: Tersa Motor brake: Yes Suction nozzle: 120 mm

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Fpedpsxvtdxjfx Ad Njp

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - Serial number: AH/115214 - Number of units [pcs]: 6 Fpjdpfswnickex Ad Nsp - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Radius scraping unit - └ 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: Planing width: 410 mm Number of knives: 3 Tersa knives Max. thicknessing height: 240 mm Min. thicknessing height: 3 mm Fjdpfxoxvnn Ej Ad Nepp Chip removal: max. 7 mm Thickness table adjustment: mechanical Thickness display: mechanical Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Motor: 4 kW Extraction diameter: 120 mm Availability: approx. mid-April 2026 Storage location: Wetterau

Condition: used, Year of construction: 2020, total height: 2,500 mm, total length: 5,000 mm, total width: 2,400 mm, Empty weight: 2.500 kg CNC machining centre SCM Morbidelli N100 12 A Brand SCM Type Morbidelli N100 12 A Year of construction 2020 Serial number AM00002846 Machining table dimensions 2486x1255 mm (LxW) Groove pattern 40 mm distance Distance between holes vacuum cups 120 mm Equipped with 3 reference gauges Table has 1 vacuum field Table working range X axis 2486 mm Y axis 1255 mm Z-axis 150 mm Stroke of the units X axis 3120 mm Y axis 1685 mm Z axis 250 mm Movement of the axes  Maximum vectorial speed in rapid traverse XY axis 35 m/min Stroke of Z axis 250 mm Panel pass 150 mm Fpodpfx Aswwa Hlsd Nop Hiteco milling unit Motor power 5.5 kW (7.5 HP) Tool holder HSK-63-F Milling spindle speed 1500-24000 rpm Tool changer 8 positions Central exhaust connection 250 mm Control unit Windows EmbeddedStandard 7 64 bit  21.5 LCD touch screen XILOG-MAESTRO software package  Including vacuum pump Capacity 250 m3/h Power 5.5 kW Max. vacuum 0.9 bar Noise level 81 db (A) Total dimensions 5000x3000x2500 (LxWxH) Total weight 2500 KG - Year: 2020 - Documentation available: Yes - CE marking present: Yes - Serial number: AM00002846 - Transport dimensions: 5000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AH / 121500, table width: 1,290 mm, table length: 2,570 mm, overall weight: 2,522 kg, Equipment: CE marking, TECHNICAL DETAILS Table Fedpfx Aoxrluued Njpp Table length: 2,570 mm Table width: 1,290 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,870 x 1,900 x 2,300 mm Weight: 2,522 kg EQUIPMENT CE marking

Condition: used, Year of construction: 2016, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2016 - Documentation available: No - CE marking present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fjdpfx Ajxb Tp Sjd Njpp Glenn Smeets