Used Scm S 630 for sale (651)

Condition: used, Year of construction: 1990, used, in good condition with Tersa cutterblock and infinitely variable feed Make: SCM Bwjdpfx Afoyztzqsmew Model: S63B Year of manufacture: 1990 Machine no.: 47015 GS-certified Motor: 5.5 kW Planing width approx. 630 mm Planing height approx. 3–240 mm Segment pressure beam 2 steel feed rollers Feed rate: 18 m/min Number of knives: 4 pcs Knife system: Tersa reversible knives Digital height display Electric fine adjustment of height Extraction port D 160 mm Space requirement approx. 1250 x 800 x 1100 mm Weight approx. 750 kg Location: 97447 Gerolzhofen, freely loaded, unpacked Delivery in current inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Bwodpfx Aj Aflwyjfmow

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus Bsdpfxezwg H Aj Afmsww DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Bodpfj Ad Hatsx Afmsww Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 118 mm, cutting width (max.): 1,270 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,550 mm, total width: 2,200 mm, total height: 1,600 mm, overall weight: 630 kg, Equipment: CE marking, documentation/manual, saw blade guard, – Italian manufacture – Year of production: 2006 – Operating manual and CE certificate TECHNICAL SPECIFICATIONS: – Carriage length: 3200 mm – Cutting width on the right side: 1270 mm – Blade diameter: min. 250 mm, max. 350 mm – Scorer blade diameter: 120 mm – Main motor: 5.5 kW – Scorer motor: 0.55 kW Bwedpfxsy Ax Nie Afmsw – Brake – Main blade spindle diameter: 30 mm – Scorer spindle diameter: 20 mm – Cutting height adjustment – Cutting angle adjustment: 0° - 45° – Max. cutting height at 90° (350 mm blade): ~118 mm – Max. cutting height at 45° (350 mm blade): ~84 mm – Two ratchets – Moving guard – Carriage dimensions (length/width): 3200 x 315 mm – Extraction port diameter: 80 and 120 mm – Overall dimensions (L/W/H): 355 / 220 / 170 cm – Weight: ~630 kg

Condition: excellent (used), SCM S 52 Thicknessing Machine - Max. planing width 52 cm - Max. planing height 24 cm - Electric planing height adjustment - 4 standard knives Bjdpfx Afez I Ihtemoww - 4 feed speeds - Table roller In very good condition.

Condition: used, Year of construction: 1987, Max. working width: 630 mm Number of knives: 4 pcs Bedo Ahrnajpfx Afmeww Knife shaft: Tersa knife shaft Motor brake: Yes Max. planing height: 240 mm Min. planing height: 3 mm Max. material removal: 8 mm Thickness table adjustment: electric/manual & fine adjustment Thickness gauge display: mechanical digital display Feed speed, fixed: 6/18 m/min Thickness table spindles: 1 large Infeed rollers: Steel, toothed Outfeed rollers: Steel Weight approx.: 900 kg Motor power: 5.5 kW Dust extraction diameter: 150 mm Location: Customer

Condition: repair required (used), Thickness planer Manufacturer: SCM Model: S63 B Year of construction: N.A. Working width: 630 mm Max. workpiece height: 240 mm Min. workpiece height: 3 mm Max. stock removal: 8 mm Table size: 630 x 1,000 mm Power: 5.5 kW Knife type: Tersa Number of knives: 4 Bwedoyh Ut Repfx Afmow Outfeed roller: Steel 1x table roller, driven Height adjustment: Electric - Manual Feed speed: 6 - 18 m/min; infinitely variable Speed: 4,500 rpm Dimensions: 1,250 x 1,050 x 805 mm Weight: 825 kg

Condition: excellent (used), Year of construction: 2010, -max.width-240mm -work heads 4+1 Bodpfxez Rnlfe Afmeww

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration Bodpfx Aozyghlofmjww 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit Bedpfoz Ebzhex Afmeww consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Bsdpfozrvvvjx Afmsww

Year of construction: 2021, condition: used, Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage. Bwedpfx Aszzdyusfmew

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Bedpfxoy D U A Ij Afmoww Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Cutting size 3300x2200mm + back loading table. Cutting height 67mm. Main motor 9,0 kW Scoring motor 1,3 kW Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Side alignment with pneumatic stroke. Wincut optimising software included. Very good condition. Available immediately. Bsdpfxjz Suv He Afmjww

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece length (max.): 2,480 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, table length: 2,480 mm, table width: 1,250 mm, CNC – MORBIDELLI UNIVERSAL 2412 TV (SCM Group) Technical specifications: Machine dimensions: approx. 4320 x 1800 x 2100 mm Machine weight: 2100 kg Working range of X-axis: 2480 mm Working range of Y-axis: 1250 mm Z-axis stroke: 150 mm Maximum workpiece thickness: 80 mm X/Y axis speed: up to 78 m/min Bedpfj Aduqaox Afmoww Z-axis speed: up to 24 m/min Power supply: 3 x 400 V / 50–60 Hz Total installed power: 16.5 kW Rated current: 29 A Operating pressure: minimum 7 bar Compressed air consumption: 100–200 NL/min Drilling unit: - 12 vertical spindles - 6 horizontal spindles (2+2 in the X-axis and 1+1 in the Y-axis) + integrated grooving saw in the X-axis. Milling spindle: - power: 6.6 - 7.5 kW - speed: 1500-24000 rpm - clamping system: HSK 63F - tool rack with 10 positions Beam-type work table: 6 beams Software: Xilog Plus + PanelMac Windows XP Additional equipment: Suction cups Light curtain safety gate Vacuum pump 90 m3/hour Features: Suitable for MDF, chipboard, and solid wood Robust and reliable construction. Easy operation and maintenance. The machine is suitable for small to medium-sized production facilities. Inspection and testing on site are available. The machine is in good technical condition and has been regularly maintained.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Bsdpfxjzc Ilxs Afmsww

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AB00029039, feed length X-axis: 3,050 mm, feed length Y-axis: 900 mm, feed length Z-axis: 60 mm, input frequency: 50 Hz, input current: 31 A, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, working width: 900 mm, total width: 2,159 mm, total length: 3,459 mm, total height: 1,500 mm, SCM Startech CN Plus R F23L CNC drilling, grooving and routing centre, manufactured in Italy in 2023. The machine is currently installed in Pejë, Kosovo, and can be inspected under power by prior appointment. Machine identification: - Manufacturer: SCM - Model: Startech CN Plus R F23L - Year of manufacture: 2023 - Serial number: AB00029039 - CE version - Machine weight: 1,383 kg Main equipment: - F23L drilling head - 13 independent vertical drilling spindles: 7 in X and 6 in Y - 10 horizontal drilling spindles: 6 in X and 4 in Y - Drilling motor power: 2.2 kW - Drilling spindle speed: 4,200 rpm - 5.5 kW vertical electrospindle for routing operations - Electrospindle speed: 1,000–18,000 rpm - ER32 collet with manual tool change - Maximum routing tool diameter: 20 mm - Integrated grooving saw in the X direction - Maximum saw blade diameter: 125 mm - Saw blade speed: 5,500 rpm - Automatic workpiece positioning and side alignment - Centralised lubrication system - SCM Maestro CNC software with Hicam machine interface - PC control with 19-inch display - Barcode program support - Uninterruptible power supply unit (UPS) - Additional Maestro CNC hardware key Working capacity: - Maximum panel dimensions: 3,050 × 900 × 60 mm - Minimum panel dimensions: 200 × 80 × 10 mm - Maximum axis speed X/Y/Z: 40/40/10 m/min - Maximum vertical drilling depth: 30 mm Bsdpfxo Afnhho Afmoww Installation data: - Electrical supply: 400 V, 3+N, 50 Hz - Input current: 31 A - Installed power: 20.7 kVA - Compressed-air consumption: 50 Nl/min The machine is used, fully functional and available for demonstration under power. Availability: by arrangement. Sale basis: EXW Pejë, Kosovo. Dismantling, loading and transport can be arranged separately. Further technical information, documentation and an operating video are available on request.

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 107 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 4,070 kg, Equipment: documentation/manual, We offer this used SCM Casadei Axo 400/38 panel saw, manufactured in 2019. Brand: SCM Casadei Sempre Serial number: AE00000295 Type: SEZ.MON.2 Model: AXO (Passat) 400/38 Year of manufacture: 2019 Weight: 4070 kg Rated voltage: 400 V Number of phases: 3 Current: 40 A Frequency: 50 Hz Short-circuit current: 10 kA Bjdpfx Afez R Su Ssmsww If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 520 mm, number of blades: 4, total width: 1,100 mm, total height: 1,200 mm, overall weight: 600 kg, – Made in Italy – In very good condition TECHNICAL SPECIFICATIONS: – Planing width: 520 mm – Planning height: 240 mm Bods Agfhqopfx Afmeww – Main motor: 5.5 kW – Electric height adjustment – Four feed speed settings – Four TERSA knives – Shaft diameter: 110 mm – Shaft speed: 4500 RPM – Segmented, helical toothed infeed shaft – Rubber-covered outfeed shaft – Nozzle diameter: 150 mm – Dimensions (L/W/H): 120x110x125 – Weight: ~600 kg

Condition: excellent (used), SCM 320cm Linvincibile Si3 panel saw Bjdpfx As Ahm R Tjfmjww 320cm carriage, 0-45 degree tilting saw head, motorized tilting and up/down adjustment of the saw blade, right-hand fence with motorized adjustment up to 1500mm, 1.3KW scoring saw, 2-axis, electrically adjustable, 9KW motor, 3 speeds, max. saw blade diameter 450mm, Fence with electronic displays. Used machine, very good condition.

Condition: used, Year of construction: 2003, Width 520mm Motor 7.5kw 380V Rollers in the table Split entry roller Sharpening tree 4 chisels Maximum height 250mm Bsdpfx Afs Ahx Szomsww Electrical display

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA1/018801, functionality: fully functional, power: 9.5 kW (12.92 HP), workpiece length (max.): 3,086 mm, workpiece width (max.): 2,155 mm, overall weight: 3,841 kg, year of last overhaul: 2016, Equipment: CE marking, documentation/manual, We are offering this ready-to-use SCM Pratix S22 machining center, manufactured in 2016. The machine features a 9.5 kW spindle (max. 24,000 rpm) and an F12 2.2 kW drilling unit (12 independently operated). Bwjdoz Sp N Uepfx Afmjw The machine can be viewed in operation in October and the first week of November 2026. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 Bwodpezuzfhefx Afmew - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers Bwsdpfxszydafo Afmsw - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering