Used Scm S 630 for sale (634)

Condition: used, SCM 320cm SiX panel saw Lredjzd Uf Tepfx Apmep 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. All adjustments are functional.

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm Lsdpfx Asxxkt Aepmsrp • Working height up to 120 mm • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: ready for operation (used), working width: 240 mm Ledew Aflqopfx Apmerp working height: 150 mm spindles: 5 spindles set: bottom/right/left/top/bottom spindles speed: 6000 RPM spindles diameter: 40 mm minimal diameter of tool: 100 mm max diameter of tool: 200 mm motors: 3x 5,5kW; 2x 4kW; 2,2kW pneumatic pressure of feeding rolls year: 2010

Condition: new, Year of construction: 2025, heavy-duty construction with cast iron table smooth movements using hand lever and handwheel eccentric clamping device dowel drilling unit with 16-22-25-32 mm grid 2 spindle speeds: 1500/3000 rpm WESCOTT drill chuck 1 - 16 mm CE compliant Work table dimensions: 287 x 550 mm Longitudinal travel: 200 mm Vertical travel: 160 mm Cross travel: 125 mm Three-phase motor power: 1.8 kW, 400 V, 50 Hz Lodpfx Aoycg U Eopmsrp

Condition: like new (used), Year of construction: 2007, operating hours: 50 h, functionality: fully functional, SCM SUPERSET XL Four-Sided Planer Year of manufacture: 2007 The machine has only operated for 50 hours, it is practically like new. Technical specifications: • Working width up to 240 mm • Working height up to 120 mm • Spindle speed: 6000 rpm Lrjdpfx Apjyhhx Nemop • Stepless feed adjustment: 5–25 m/min • Spindle configuration (5 spindles): - bottom 7.5 kW - right 7.5 kW - left 7.5 kW - top 7.5 kW - bottom 7.5 kW • All tool spindles have independent motors The machine is equipped with 2 vertical spindles (2 and 3) with HSK85S quick couplings.

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Lrodpfx Apjit I Sbsmjp Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 2,980 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 200 mm, number of axes: 3, total height: 2,680 mm, total width: 3,000 mm, overall weight: 3,295 kg, spindle motor power: 6,600 W, product length (max.): 6,970 mm, spindle speed (max.): 18,000 rpm, This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details. • Working area: 2500 x 1000 mm • Programmable speeds: X 25 m/min / Y 30 m/min / Z 22.5 m/min Ljdjy Dgb Nepfx Apmorp • Vector speed: 40 m/min • Drilling unit: 16 spindles, 4000 rpm, 2.2 kW (10 vertical + 6 horizontal) • Main spindle: HSK-63 • Tool magazine: Side magazine, 7 positions

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included Lsdpoyuylujfx Apmjrp 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: CE marking, documentation/manual, CNC NESTING SCM PRATIX S22-31B with AUTOMATIC UNLOADING TECHNICAL FEATURES • Moving gantry, with Bumper safety system • 3 controlled axes: X, Y, and Z • Travel speed on the axes: X: 35 m/min Y: 35 m/min Z: 15 m/min • Usable working area in X: 3,086 mm • Usable working area in Y: 2,155 mm • Usable working area in Z: 150 mm • PRO-SPACE safety system. With this system, the machine does not require perimeter guards or safety mats; the operator has free access to the work area from any side. • MATRIX aluminum table, 2,220 mm x 3,150 mm • 16 retractable pneumatic stops on the table (6+6 in Y and 4+4 in X) • 8 MPS 130x130 mm suction cups, H=25 mm • 4 MPS 150x50 mm suction cups, H=25 mm • SCM TECPAD remote control with digital display, with its corresponding resting base • Lubrication of the guides by means of a centralized drive pump • 2 vacuum pumps of 250 m3/h each, located under the machine structure • Xilog-Plus control software • Maestro Nesting software. Rectangular nesting • DXF file import • Pusher for evacuating finished parts, with vacuum cleaning system • Motorized belt table for material unloading, with photocells to read parts at the end. 3,200 mm x 2,180 mm • CE COMPLIANCE • Machine in excellent condition. Year of manufacture: 2014 • Supplied with the instruction manual, machine exploded view diagram, and electrical diagram. OPERATIONAL GROUPS: ROUTER • Electro-spindle power: 6.6 kW / 9 HP. 0 - 24,000 rpm • Air blowers • Mount that allows for the attachment of a horizontal tool Ljdezav Hxjpfx Apmjrp • Linear tool changer, TR13 model, with 13 positions • ATC for HSK F63 tool holders • Calibration sensor to automatically measure tool length MULTIPLE DRILLING UNIT • 7 vertical drill holders • 1+1 horizontal drill holders in the X direction • 1+1 horizontal drill holders in the Y direction • 1 vertical disc in the X direction

Condition: good (used), Year of construction: 2003, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planing width: 230 mm, Planing and Moulding Machine / Four-Sided Planer Manufacturer: SCM Model: Superset XL Year of manufacture: 2003 Planing machine with 5 spindles (bottom-right-left-top-universal), previously used in a parquet production facility. Working width: 230 mm Working height: 120 mm Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bottom Ledpey Rk Hcofx Apmjrp Right Left Top Universal spindle Weight approx. 3000 kg

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Year of manufacture: 2008 Machine length: 11,000 mm Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Units: - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes Ledpfezdlabjx Apmerp - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. For additional information, please call.

Condition: excellent (used), SCM Sintex XL Four-Side Planer Working width: 23-180 mm Lodew Hbf Ijpfx Apmorp Working height: 6-100 mm Number of spindles: 4 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Left Top Minimum length of workpiece: 300 mm Spindle diameter: 35 mm Feed speed adjustable by inverter: 4-12 m/min Technical documentation CE certificate

Condition: excellent (used), Surface planer SCM F520 Class Working width: 520 mm 4-knife cutterhead Traditional knives Electronic raising and lowering of the worktable Main fence adjustable up to 45° Lsdpsx H S Dnofx Apmerp Table length: 2700 mm CE certificate Technical documentation (DTR) Year of manufacture: 2014

Condition: excellent (used), Year of construction: 2010, COMEVA MB 500 Planer/Jointer Working width: 510mm 4-knife cutterhead Traditional knives Lredpoiwa Spjfx Apmep Length of work tables: 2630mm Adjustable fence, tiltable at 45° Motor power: 4kW Smoothing combs CE certified

Condition: good (used), Year of construction: 2018, functionality: fully functional, Horizontal panel saw / Horizontal beam saw with lift table loading Manufacturer: SCM / Gabbiani Model: Gabbiani ST 115 Year of manufacture: 2018 Horizontal pressure beam saw with rear lift table loading, previously used in a parquet factory. Cutting length approx. 3200 mm Lsdpey H Up Hjfx Apmsrp Cutting depth on the lift table approx. 1850 mm Max. stack height on the lift table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed: 0 - 135 m/min Variable pusher speed: 0 - 70 m/min Main saw motor approx. 9 kW Main saw blade speed: 3900 rpm Saw blade diameter: 400 mm Scoring saw motor approx. 1.8 kW Scoring saw speed: 6300 rpm Scoring saw blade diameter: 160 mm 6 clamps (3 of which include a front aligner) 2 air-cushion tables, each with blower Voltage: 400 V, 3-phase, 50 Hz, 43 A Approximate weight: 5500 kg

Condition: used, Year of construction: 2000, machine/vehicle number: AB/139264, functionality: fully functional, input voltage: 400 V, saw blade bore: 30 mm, rotational speed (max.): 5,000 rpm, SECOND-HAND CIRCULAR SAW SCM MOD. SI 400N - Carriage mm. 3800 Ledpfx Ajzcn U Tspmorp - Scoring unit - Volt. 400/50 - S/N AB/139264 - Year 2000

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, working width: 230 mm, working height: 120 mm, Equipment: CE marking, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES 1. horizontal bottom 11 kw 2. vertical right 7.5 kw 3. vertical left 7.5 kw 4. horizontal top 11 kw Lodpozcn A Refx Apmjrp 5. horizontal top 7.5 kw 6. horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012

Condition: used, functionality: fully functional, On offer: SCM Sanyda UNO 900 R+RT wide belt sanding machine. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. Lrodpfx Aezhppnopmop Specifications: • Manufacturer: SCM • Model: Sanyda UNO 900 R+RT • Working width: 900 mm • Maximum working height: 150 mm • Number of sanding units: 2 • First unit: steel roller with a diameter of 140 mm • Second unit, combined type: soft rubber roller with a diameter of 140 mm and a sanding pad • Main motor power: 7.5 kW • Motor start in star-delta configuration • 2 conveyor belt feed speeds • Analog indicator for set sanding thickness • Thickness gauge for the workpiece with automatic adjustment of the worktable height • Pneumatic oscillation of the abrasive belt • Option to convert the oscillation system to optical control for an additional fee • Abrasive belt dimensions: 1525 × 930 mm • Number of dust extraction ports: 2 x 160 mm • Overall dimensions: 167 × 145 × 170 cm (L × W × H) Additional information: • Good technical condition • Machine preserved in its original condition • Photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We assist in obtaining leasing or loan financing • Transport costs are determined individually

Condition: excellent (used), SCM S52 thickness planer Max. planing width: 520 mm, Max. planing height: 240 mm, 4 classic knives (wedge-type), electric lifting + manual lifting, feed speed infinitely adjustable, metal infeed roller, 2 rollers in the table, adjustable, digital height display, Ljdpfx Apjza Dg Homsrp 160mm dust extraction port, 5.5KW motor, quiet operation, machine in good condition.

Condition: excellent (used), Year of construction: 2019, Holzkraft Panel Saw Si 400 es Year of manufacture: 2019 Table dimensions: 940 x 560 mm Table height: 900 mm Cutting length: 3200 mm Sliding table dimensions: 360 x 142 x 2600 mm Max. cutting height 90°/45° with scoring unit: 138 / 98 mm Max. cross-cut width to the left of saw blade: 3260 mm Cutting width with rip fence: 1270 mm Saw blade tilting range: 90° - 45° Max. saw blade diameter: Ø 400 mm Ljdpfsyyax Hjx Apmsrp Scoring blade diameter: Ø 120 mm Main saw blade speed: 3500/5000 rpm Scoring unit speed: 9200 rpm Motor power: 400 V / 50 Hz / S6 - 40% 7 kW (9.5 HP) Scoring unit motor power: 0.55 kW (0.75 HP) Extraction port diameter: 120 mm Blade guard extraction port Ø: 80 mm Weight approx. 680 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, working width: 230 mm, planing height: 130 mm, total width: 1,800 mm, total height: 1,650 mm, total length: 3,500 mm, overall weight: 2,400 kg, table length: 2,000 mm, number of spindles: 4, extraction connection diameter: 120 mm, Capabilities: 230x130 mm Feed device for timber of all widths Option: pressure device in front of right spindle moulder for short timber Ledsy E It Njpfx Apmsrp Lower horizontal motor: 11 kW Right and left spindle moulder motors: 2 x 7.5 kW Upper planer motor: 11 kW Option: specific feed for workpieces up to 20 mm with electrically adjustable guide, controlled by foot pedal. Year: 2019

Condition: used, Year of construction: 1987, machine/vehicle number: AB-14022, power: 4 kW (5.44 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, number of blades: 2, actuation type: manual, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, total length of planing tables: 2,000 mm, total width: 400 mm, overall weight: 580 kg, SCM Jointer-Thickness Planer 2000 d.FS Planing width: 400 mm Jointer table: 950 / 950 mm Cutterhead speed: 4000 rpm 3 strip planer knives Planing height: 3 - 200 mm Feed rate: 4.5 / 8 m/min Max. cutting depth: 8 mm Motor: 4 kW / 400 V / 50 Hz Weight approx. 570 kg As inspected, ex location Seevetal Subject to prior sale Ledpfexnpn Rjx Apmjrp

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment Lsdpfxeyaqg Tj Apmjrp • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm

Condition: ready for operation (used), Year of construction: 2020, working width: 520 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, working length: 2,310 mm, This SCM Abricht/ Dickenhobelmaschine was manufactured in 2020. It features a working width of 520 mm and an adjustable thicknessing height from 3 mm to 250 mm. The machine includes a "TERSA" cutter block system with 4 disposable knives and offers four feed speeds. Consider the opportunity to buy this SCM Abricht/ Dickenhobelmaschine wood planer. Contact us for further details. Lrodpfxeyiucqo Apmop • Working width: 520 mm • Thicknessing height: 3–250 mm (adjustable) • Surface table length: 2,310 mm • Feed speeds: 5 / 8 / 12 / 18 m/min • Cutter block: TERSA system, 4 disposable knives, 120 mm diameter • Control unit: READY electronic control • Programmability: up to 99 programs • Axis control: motorized vertical adjustment of thicknessing table with digital position display • Power-assisted changeover: pneumatic/hydraulic automatic lifting of surfacing tables • Supply voltage: 400 V, 3-phase, 50 Hz • Main motor: 9 kW (12 HP) with automatic star-delta start • Braking: automatic electronic motor brake • Suction: 120 mm extraction outlets for surfacing and thicknessing

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Spindle configuration 1st spindle: Planing spindle – 4 kW 2nd spindle: Right vertical spindle – 5.5 kW 3rd spindle: Left vertical spindle – 5.5 kW 4th spindle: Top horizontal spindle – 4 kW 5th spindle: Bottom horizontal spindle – 4 kW Lrsdpsyym Nrsfx Apmsp 6th spindle: Universal spindle – 4 kW Spindle speed: 6,000 rpm Spindle diameter: 40 mm Working area Working width: 25–230 mm Working height: 10–120 mm Min. workpiece length: 450 / 630 mm (depending on version) Feed Infinitely variable: 5–25 m/min Feed rollers Ø 140 mm Infeed table 2,000 mm Tooling ranges Vertical spindles: 100–180 mm Horizontal spindles: up to 180 mm Max. profiling depth, vertical: 40 mm Features Manual table and central lubrication Robust industrial design, smooth operation and high precision