Used Scm Method K for sale (580)

Condition: used, Year of construction: 1999, Storage location: Nattheim Lhedpsvvi Rxofx Aa Eor

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A Lhjdex Dcn Njpfx Aa Eer - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Year of construction: 2015, condition: ready for operation (used), Main Drive Lhodpfxsx Nr Nis Aa Ejr Number of axis 5 Movement X-Axis Movement 3100 mm Z-Axis Movement 160 mm Y-Axis Movement 1550 mm This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Sander SCM TYPE UNO 900 mm Lodpfxsx I R Sme Aa Eehr

Year of construction: 2022, condition: new, planing width (mm): 520 planing height (mm): 3 - 250 motor power (kW): 9 voltage: 400 volt, 50 Hz Lsdpel Axhcefx Aa Eohr minimum workpiece length (mm): 230 maximum chip removal (mm): 6/8 feed speed (m/min): 5-8-12-18 table length (mm): 2310

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Ljdpfew Ic Tzex Aa Eohr Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Lsdpfx Aasvvi Scj Eehr

Condition: used, Year of construction: 2001, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA1/011994 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lodpfoxzcnkjx Aa Eohr Glenn Smeets

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: L'invincibile SI X - PANEL SAW WITH DOUBLE BLADE TILTING Ledpjx Enrxsfx Aa Eshr 931201 Frequency: 50 Hz 570348 Scoring unit with independent motorization 570351 LED lighting in the scorer area 530130 "Full Support & Wireless" 570353 Extension with roller track on the rip fence side 080999 Ex works R01264 L'invincibile SI X CE version 083202 Base 109993 MACHINE LANGUAGE: German 930731 Voltage: 400V EU 080685 Additional packaging 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: upon request Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2011, operating hours: 13,802 h, functionality: fully functional, machine/vehicle number: PRATIX Z2-27, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, overall weight: 2,000 kg, spindle speed (min.): 24,000 rpm, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Description TECHNICAL SPECIFICATIONS PRATIX Z2-27 AXES Usable working area X-Y-Z * 2,700-1,300-180 mm Axis travel X-Y-Z 3,060-1,735-250 mm Vectorial speed X-Y 60 m/min WORK TABLE Type MF Alu grid table 1,225 – 2,750 Lhsdpoxgdc Hjfx Aa Eer Vacuum pump Becker 250m3 DRILLING UNIT F12 Vertical drills No.-rpm 12 (7X-5Y) – 4,000 MILLING MOTOR Power kW (HP) 7.5(10) Min - Max spindle speed rpm 1,500 – 24,000 Tool magazine in table No. 10 positions Installed power KVA 23÷28.5 Total machine weight 2,800 kg Price excluding VAT and tools

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA1/016854, 3-AXIS DRILLING & MILLING CENTER Make: SCM Model: TECH Z2 Comp R0410.01 Serial No.: AA1/016854 Year: 2012 (Photos taken before overhaul, functional testing, and cleaning) MAKING CAPACITIES: - Max. workpiece height (thickness): 160 mm - Max. workpiece length: 2700 mm Dual station: 1210 mm - Max. workpiece width: 1300 mm Movements: - X-axis travel: 3060, Y-axis: 1735, Z-axis: 250 mm - Max. travel speed (vector: 60 m/min) MACHINE COMPOSITION: - 6 Pneumatically clamped beams for suction cups, e.g., 120x120 or 55x120 mm Ljdpfov Tzrvox Aa Eehr - Unit Automatic lubrication - Mounted unit on the neck of the sign composed as follows: (X movements by rack and pinion, Y movements by screws and bushings; high-quality precision linear guides with automatic lubrication) • 11 kW (15 HP) milling/routing unit: - Rotation 1500 - 24000 rpm, variable speed, right/left direction - Tool holder connection type HSK63F, ER32 collet - Onboard magazine for 8 tools - Perimeter extraction hood • 18-chuck drilling unit: - 12 independent vertical chucks (8 in the X direction, 5 in the Y direction) - 6 horizontal chucks (4 in the X direction, 2 in the Y direction) - Center distance between chucks 32 mm for M10 / Ø11 mm drill bits - Rotation speed 4000 rpm - Pneumatic vertical stroke 60mm - Perimeter extraction hood • Integrated unit for groove sawing and milling - Ø120mm blade, 6mm thick - 6000 rpm speed - 60mm pneumatic vertical stroke • Mobile console on a jib with a control PC: – Windows XP operating system – 17" LCD screen – Ethernet connection – Xilog and Maestro machine interface software OTHER FEATURES: - 400V overall power supply. Three-phase + N+T 50Hz IN37A - 12 kW electro-spindle motor - 2.2 kW drilling/grooving motor - 1 x 2.4 kW vacuum pump: 90-108 m3/h - Pneumatic supply >=7 Bar - Suction: Suction inlets: 2 x Ø 150 mm (1 x Ø 200 mm inlet using the installed bypass) Recommended speed: 30 m/s - 3400 m3/h - CE-compliant machine with safety zone and light barrier Operating dimensions with safety zone: see documentation excerpts Shipping dimensions: to be specified when preparing the equipment Estimated total weight: 2200 kg Machine supplied with instruction manual and software, spare parts list, electrical and pneumatic diagrams. Please contact us for the supply of consumables, accessories, and/or vacuum systems. Machine serviced and brought into compliance, with quality control and dynamic functional testing. 3-month warranty and compliance certificate. Available from stock, subject to prior sale. Prices excluding VAT. Delivery and additional services upon request.

Condition: used, machine/vehicle number: 007983, Position 1: Single Edgebanders SCM-STEFANI KDR Position 2: Panel Return Systems SCM-STEFANI KDR Lodpewqndlofx Aa Eohr

Condition: used, Storage location: Nattheim Lhodpjwkirqofx Aa Esr

Condition: used, Year of construction: 2016, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, Empty weight: 1.310 kg Lhedpfexy Rk Rox Aa Esr - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. Lhedpfxsx I S R Ds Aa Eer Application Types Edge Banding

Condition: used, Year of construction: 2007, Spindle tiltable: Yes, -45 to +45° Height adjustment: electric / position control Tilting adjustment: electric / position control Fence adjustment: electric / position control Height display: digital Tilting angle display: digital Fence position display: digital Spindle diameter: 30 mm, 40 mm, collet chuck for shank cutters Speeds: stepless variable Motor power: 7.5 kW Motor brake: Yes, automatic Ljdpfox I Aiwox Aa Eehr Extraction connection: 2 x 120 mm Machine length: 2600 mm Machine depth: 1400 mm Weight: 1100 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. Lhjdpfx Aajxn Um Sj Eor If customer wishes it can be seen working.

Condition: used, Workspace: 2,600 x 1,250mm X-axis: 2.700 mm Y axis: 1.600 mm Z-axis: 250 mm Lhedpfx Aon A Dwgoa Eor Spindle motor: 7,5 kW feed: Max. 38 m/min Video: On demand CNC machining center SCM Routech R 3000 for processing plate material with automatic loading (vacuum destacker) and outlet. Special price for self-dismantling and self-collection.

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Lhodpfew Aig Sjx Aa Esr Storage location: Customer.

Condition: used, Year of construction: 2011, functionality: fully functional, We are offering this pre-owned SCM Tech Z2 CNC machining center, manufactured in 2011 and currently located in Belgium. This woodworking machine features a 2700 x 1300 mm working area, a high-speed spindle reaching 24,000 rpm, and a 7.5 kW motor, providing precision and efficiency for a wide range of woodworking applications. Advantages: Large Working Area. High Spindle Speed. Versatile Drilling and Milling Capability. Flexibility in Tools & Tool Changes. Lhsdpfjxq Hpdjx Aa Ejr

Condition: good (used), Code: 0278 Brand: TECNOMAX SCM Model: ST 4 ELITE - CE Standard Saw spindle moulder with tilting blade and scoring unit for carpentry, furniture, wooden window frames, doors, panels and various - CE Standard Lhjdpfox Ivuasx Aa Ejr Technical data: Squaring carriage length 3200 mm Blade inclination 90-45 degrees Max saw blade diameter with scoring unit mounted 315 mm Max saw blade projection from the table at 90°/45° mm 100/70 Cutting width at parallel guide 1000 mm Scoring unit blade diameter 100 mm Spindle moulder Useful spindle length 125 mm Spindle rotation speed rpm 3500/6000/8000/10000 Max tool diameter 210 mm Three-phase motors 5,5 Hp Suction inlet diameter mm 120 Overall dimensions of assembled machine mm 3600 x 3000 x 1100 h Overall dimensions for transport mm 3600 X 1600 X 1100 h Weight kg 645

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Lhodpfsw Aifzjx Aa Eor

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · Travel distance X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm The basic frame structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, making it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the secret to permanent precision and stability. The layout of the machine allows the operator an optimal workflow while requiring minimal floor space. The resulting frame provides a balanced and secure base for the machining unit with outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on prismatically ground guides via recirculating ball carriages. The machining unit, in turn, is mounted to the mobile carrier using prismatic, ground rails and recirculating ball carriages. Description of aggregates and accessories (basic configuration) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill mount: M10 with 11 mm fitting Grooving saw unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Includes: 4 tool holders (right), without collets R8L Tool changer Automatic tool changing system for 8 tools. Moves along with the rear aggregate carrier for quick tool access. · Number of tool slots: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total tool weight: 22 kg · Adapter for 1 angle gearbox · Travels in X direction Horizontal milling unit (position 1) Horizontal unit with two opposing outputs for milling and grooving. Lhjdpfex Iwc Ssx Aa Eer · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collet 3–20 mm (ER 32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / 50 mm bore) · Motor power: 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Worktable The worktable is designed to provide the operator with maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of the workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · The retractable reference stops are CNC-controlled · Pendulum operation standard (2 working fields) --- other clamping systems optional --- Axis movement The drive system for X, Y, and Z axes uses ground recirculating ball screws of the highest precision class. The recirculating ball drive...

Condition: used, Year of construction: 2023, Technical Data Working Area I.M.S. I.U. Working area X axis 5515 mm (217") Working area Y axis 1620 mm (63¾") Material passage Y 1900 mm (74¾") Material passage Z 250 mm (9¾") Workpiece length for pendulum processing 2600 + 2600 mm (102" + 102") Traverse speed of X-Y axes PRO-SPACE 56 m/min (184 ft/min); Traverse speed of X-Y axes PRO-SPEED 78 m/min (256 ft/min). *For further details, please refer to the corresponding machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for JQX motor, or 1720 mm (67½") for KS/KT motor. Max. loadable panel width during horizontal drilling, spindle oriented vertically only, with no middle reference stops. Installation Data I.M.S. I.U.: Installed power: 23 – 28.5 KVA Electrical specifications: 400 V, 50 Hz, 3 phases Air consumption: 450 Nl/min Lhjdpsxwht Defx Aa Ejr Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Extraction port diameter: 250 mm (9.8") Noise level VSA* / LAV*: Drilling 72.2 dB(A) / 74.6 dB(A), Milling 74.3 dB(A) / 80.7 dB(A) Reference standard: EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Location: Nattheim

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Lhedpfx Asxnldbsa Eor