Used Sawn for sale (75)

Condition: ready for operation (used), functionality: fully functional, Chipper for wood, lumber shavings LINDNER type T 400/140-2 - after technical inspection - very good condition - for technological chips TECHNICAL PARAMETERS: inlet width 400 mm inlet height 140 mm rotor diameter 450 mm rotor length 400 mm power of main motor 33 kW power of motors from feed 2 x 1,5 kW number of knives 2 pieces sieve size 60 mm x 90 mm feed shafts in very good condition Gkjdpfx Asr Ak Rgoayof power of feeder motor 1,5 kW length of feeder 4200 mm transport dimensions (length / width / height) 430 / 240 / 150 cm weight approx. 2000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Gksdpfx Aaow S Eyleyjf

Condition: good (used), Year of construction: 2005, Round cutting area: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Gkjdpfx Aju R I A Heayjf Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Saw blade tension: hydraulic Saw blade cleaning: using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor

Condition: used, Weinig H25 high-speed planer and moulder for four-sided planing and profiling of wet wood (Freshly sawn) The pictures show the current condition of the machine. Among other things, some original Weinig new parts were installed, and the tables/stops were sanded and recoated. Further new parts are required for completion. These will be ordered on a case-by-case basis, taking customer requirements into account. The control panel is for testing purposes and is temporary. working width: 250 mm working height: 160 mm spindles: 5 Spindles: 5 spindle 1: Bottom (7.5 kW) spindle 2: Right (11 kW) spindle 3: Left (11 kW) spindle 4: Top (15 kW) spindle 5: Below (tba) feed: 15 kW, hydraulic control: ATS system Driven table rollers: Yes Gedpfx Aaow R S T Ajyekf Table tops: Sanded and recoated (hardened) Powered table rollers: Yes

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Gksdpfx Aasu Nit Royof Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: new, power: 382 kW (519.37 HP), overall weight: 33,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space length: 6,100 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference number for customer inquiries: 4-093---- MAN TGS 33.520 6x6 BL Short Timber Platform Body with Epsilon M12Z 10.5 Crane! Wheelbase: 3,900 mm !!! ALL-WHEEL DRIVE !!! !! IMMEDIATELY AVAILABLE FROM STOCK !! EURO 6E !! * TM cabin: the comfortable variant (narrow, long, medium-high) * All-wheel drive 6x6 * Suspension type: leaf/air (BL) * Main wheelbase 3,900 mm, 1,400 mm distance between rear axles * Diesel engine MAN D2676 LF78, 520 HP, 2,600 Nm torque, Euro 6e * MAN TipMatic automatic transmission 12.28 OD, with Retarder 35 * Eco retarder, speed-dependent, multi-stage, energy-efficient * High-performance engine brake MAN EVBec, multi-stage * Differential locks front, rear, and centre on powered rear axles * ROCKINGER tow coupling type 500 G 6A (or 40mm by request) * MAN EasyControl panel, 4 functions, can be operated from outside with the door open * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Multi-function steering wheel, leather, height and tilt adjustable * Lower bunk with slatted frame and adjustable head section * Sunblind for windshield, interior, electric * Pull-out refrigerator and drawer * MAN SmartSelect infotainment control with touchpad and direct access * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system with subwoofer * Smartphone integration Body: Loading length up to crane base 6100mm (Austria and South Tyrol special) * Platform has body dimensions approx. 5700mm length x 2540mm width * Platform color: Black * 8x OPTIPA ALU10 stakes with quick-change wedges, stakes can be removed at any time (for transport of sawn timber, straw, hay, or silage for example) * Stake holders upright in front of the front wall * Rack rails between pockets * Lashing points in the outer frame * Robust steel front wall * Extendable ladder at the front and rear for access to the platform * Preparation for manual strap tensioners (Autonordic) or alternatively Luftmann (ExTe TU) * Stainless steel toolbox under the loading area Crane: EPSILON M12Z105 FULLY HYDRAULIC LOG LOADER CRANE *max. outreach 10.50 m * Lifting moment 104 kNm * Slewing range 425° * High seat with 4 mechanical levers, 2 mechanical foot pedals * and much more. Financing / hire purchase, as well as leasing / partial amortisation leasing, is available with our leasing partner. Gjdpfx Aaexnnuceyjkf If you have further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 250 h, functionality: fully functional, workpiece weight (max.): 100 kg, working width: 500 mm, transport length: 12,000 mm, feed rate X-axis: 90 m/min, feed length X-axis: 12,000 mm, working height: 300 mm, pass-through height: 300 mm, type of input current: three-phase, total length: 2,910 mm, total width: 1,300 mm, load capacity: 100 kg, overall weight: 1,000 kg, nominal power: 2.3 kW (3.13 HP), Schiele Impregmat EVO – Professional Impregnation and Coating Machine This robust industrial Schiele Impregmat EVO is a fully automatic coating and impregnation machine, designed for high-quality and loss-free impregnation, glazing, and coloring of planed and sawn wood materials.​ Technical Features: The machine is equipped with a patented double X-overlapping spray system, ensuring even application on all sides without material loss. With 8 or optionally 10 integrated brush stations, the EVO can safely and reliably process large cross-sections and solid workpieces. This makes it ideal for laminated beams, solid wooden beams, and board material.​ Working Range: Up to 500 x 300 mm maximum workpiece dimensions (optionally up to 500 x 500 mm available). Minimum workpiece length approximately 600 mm. The feed speed is variable, about 10-60 m/min., with a working height of approximately 900 mm.​ Gjdpoxvp Sxjfx Aayskf Materials and Durability: The entire frame is made of stainless steel (SS), aluminum, and plastic for contact surfaces, providing extreme wear and corrosion resistance. All drive elements are externally mounted and protected against corrosion. The brush movements are lateral and mounted on the top, preventing medium from entering the drive mechanism.​ Applications: Suitable for water-soluble impregnation and paint media, salts, oils, tints, and thin-layer varnish with a maximum viscosity of 25 seconds DIN 4 jar. Also suitable for solvent-containing materials.​ Efficiency: Special overflow nozzles ensure ideal saturation of all hard and soft wood areas. Filtered material is returned to the circuit, resulting in material savings and cost efficiency.​ Advantages: This machine is known for its precision, consistent production quality, and reliability. Automated impregnation results in uniform finishing and minimal material waste. Suitable for professional woodworking companies, window frame manufacturers, and building material suppliers.​

Condition: good (used), functionality: fully functional, loading space length: 7,300 mm, loading space width: 2,480 mm, GERMAN DEALER offers: BDF platform swap body 7.45 m, GALVANIZED, center and outer lashing rings for sawn timber etc., 28 lashing rings, lashing rail, suitable for crane handling, loading area: 7300 mm x 2480 mm, GVW 16,000 kg, several units available. Many swap bodies and drawbar trailers in stock! ##### PLEASE CALL - NO EMAILS! DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO Commercial Vehicles has been supplying since 1983! VIEWING BY APPOINTMENT ONLY! ##### Gjdpfxox Hpfcj Aayskf

Condition: new, Number of motors 2 Stück 0 2650 mm Control manuell Ruchser RU-GLS-ED 45° glazing bead saw Gsdpfx Aoxmk Dqsayekf ----- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw can be adjusted manually to size. The Machine was designed for cutting glazing beads in pairs with one Cutting angle of 45° developed and has a fixed and a movable saw unit. The manual length adjustment is equipped with an electric digital display. Cutting lengths of 150 mm - 2650 mm can be achieved be sawn. During the cutting process, the glazing beads are with a pneumatic tensioning device from above and from the front to prevent tipping of the glazing beads. It is operated via a safety Two-hand operation. Saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V Pos. 1: RU-GLS-ED45° double glazing bead saw ----- with manual measurement adjustment, for pairs Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.2 Recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Pos. 1.5 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros Item 1.6 1 set of carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, each consisting of 1 piece of saw blade L6444(right) and L6443, (left), with special grinding 43°. Additional price: 576.00 euros ----- All prices in euros, net, plus statutory. VAT (technical information according to the manufacturer, without guarantee!)

Condition: like new (used), Year of construction: 2012, Description of Ficep RAPID HP35T Ficep RAPID HP 35 T Angle Processing Machine The Ficep HP35T is the predecessor of the current Ficep RAPID series for processing angle steel. The Ficep HP35T is a CNC-controlled system for machining angle profiles. These are robust angle processing centers commonly used in steel fabrication and truss construction. The angle steel is positioned on a transport frame for material feeding. A measuring carriage with a gripper automatically conveys the angle material to the various processing stations of the system, following the machining data entered via the CNC control panel. Once machining is complete, the finished component—drilled, marked, and sawn—is transferred to the outfeed roller conveyor and storage system. Transport System Reinforced roller conveyor for profiles up to 12 meters in length. A powered measuring carriage on the infeed table transports the material at up to 45 m/min. A rotating support system with cross-transfer racks in the loading area allows for the input of pre-staged profiles into the waiting position. In the discharge area, a driven roller conveyor transports the finished profiles/angles up to a length of 12 meters. Cross-transfer equipment with 5 supports is used for unloading. Drilling Units with Tool Changer To process large angle profiles up to 350 mm with a wall thickness of 40 mm, this machine is equipped with 2 powerful drilling units (one per flange) featuring a spindle drive of 19 kW and infinitely adjustable spindle speeds from 180 - 3500 rpm. These drilling capabilities are ideal for the use of modern carbide drill tools. The drilling tools are held in HSK-A80 holders, and each drilling unit has a tool changer with 3 tool positions for rapid tool changes. MKT38N Marking Unit A marking unit with 38 marking tools allows for flange marking on angle profiles. Characters sized 16x8 mm are hydraulically embossed, enabling part identification after galvanization. Precision Circular Saw The powerful circular saw is designed for 90° cuts. A vertical clamping system secures the material during fast sawing. Material dimensions range from 60 x 60 x 6 mm to 350 x 350 x 40 mm. The 18 kW saw motor with a 560 mm circular saw blade delivers very high cutting performance. Sawing speed is 80 - 180 m/min. Technical Specifications Ficep HP35T: Angle dimensions min. 60x60x6 mm to 350x350x40 mm Gjdpfoxn T Smex Aayokf Circular saw blade diameter 560 mm Saw motor 18 kW Cutting speed 80 - 180 m/min Max. drill diameter 40 mm Drill spindle drive: 19 kW Spindle speed 180 - 3500 rpm Feed rate 80 - 300 mm/min

Year of construction: 2007, condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW Gkjdou Nimqopfx Aaysf weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *

Condition: excellent (used), Catalogue number 7826 TECHNICAL DATA - Min length of cut elements: 600mm - Max length of cut elements: 3300mm - Min diameter of machined material: 60mm - Max diameter of machined material: 380mm - Min width of sawn beam: 50mm - Max width of sawn beam: 300mm - Head motor power: 2x4kW - Feed motors: 2×0.75kW - Feeder feed steplessly controlled with inverter - Bandsaw: - Saw length: approx. 4004mm - Saw width: 32-38mm - Blade thickness: 1.0 – 1.2mm - Wheel diameter: 600mm - Saw tensioning system pressure: 5-7MP - Saw cooling - Emergency stop - Feeder table height: 840mm - Machine dimensions (L/W/H): 4090x1900x2000mm - Weight: approx. 1000kg ADVANTAGES - Stepless feed with inverter - Polish manufactured - DTR technical documentation - Not repainted Gkodpfxjxykfbj Aayof - Used sawmill, in very good condition Net price: 16900 PLN Net price: 4020 EUR at an exchange rate of 4.2 EUR (Prices may change depending on exchange rate fluctuations)

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Gkjdpfx Asxrg E Ieayef Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: new, overall weight: 22,000 kg, axle configuration: 2 axles, loading space length: 6,600 mm, Equipment: ABS, Internal number for customer inquiries: 2-149 ---!!! WORLD PREMIERE !!! PAVIC HTA 20 66Z Short Timber Trailer with OPTIPA SW Bunks. SW = Quick-Change. With this system, you can remove the OPTIPA AL10 telescopic stanchions within minutes, allowing for maximum flexibility! Ideal for round timber and sawn timber! The side stanchion storage is included! You benefit from the greatest flexibility the market has to offer! !!! AVAILABLE IMMEDIATELY !!! ---Choose your desired stanchion stripe color: red, green, blue, neon red, neon yellow, or black! Gkedpfx Aexnn Snsaysf 2-axle bolster trailer * 4x OPTIPA SW bolster frames (quick-change system with patented wedge technology) * 8x OPTIPA AL10 telescopic loading stanchions * Special tool for stanchion assembly and telescoping * Side aluminum box for stanchion storage (holds 4 units) * Optional: a larger aluminum box for storage of all 8 stanchions available for an additional charge * Chassis length approx. 6,600 mm * Front overhang approx. 710 mm (turntable) * Removable hooks on load bolsters for securing cargo * Payload 14,750 kg * Technical gross weight up to 22,000 kg * EBS / ABS * Air suspension with safety cables, leaf spring suspension available upon request * 2 x 10t SAF off-road axles * Turntable with double ball race, max. load 20 t * Front lifting rope * Wabco smartboard * Front signal light system, highly visible for max. airbag pressure indication * LED lighting * LED work lights * High-quality KTL coating – baked enamel finish included * Twin tires: 275/70 R 22.5 with branded tires on steel rims * Optional: ALCOA Dura-Bright aluminum rims available at extra cost Immediately available! Financing, leasing, or hire purchase available. Our sales team is happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: used, 1 Pair of Transport Rollers, Platform Trolleys, Transport Carts GORR Load capacity per roller: 1,000 kg Platform size per roller: 1050 x 255 mm Platform (support plate) thickness: 4 mm Overall height: 145 mm Roller diameter: 100 mm Roller width: 37 mm Load capacity per swivel castor: 300 kg - Each roller equipped with 4 swivel castors with white polyamide wheels, bolted to the support plate - Each roller is fitted with two castors with brakes - Steel support plate with reinforced edge serves as the platform surface Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per roller: 17 kg Net weight for both rollers: 34 kg Very good condition Price is per pair = 2 heavy-duty transport skates Scope of delivery: You will receive 2 of these universally and multi-purpose heavy-duty rollers. Currently, 50 pairs in stock. Both rollers together are fitted with 8 castors and can carry up to 2 tonnes in total. Gkodpfxoxcixlo Aayof Our customers use them to transport squared timber, boards, planks, and sawn timber. Other users move beams, girders, and heavy pipes within the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Ideal as machine skates, material dollies, or machinery transport units.

Condition: used, Year of construction: 2014, functionality: fully functional, For sell a TOS Svitavy PWR 412 double-shaft multiblade saw with automatic vacum feeder and centering, manufactured in 2014. Includes: - PWR 412 multiblade saw - scissor table - roller infeed with automatic feeder and centering device - roller outfeed table - sawdust conveyor - control panels and control cabinet - several sets of saw blades - 112 used and 20 new Main machine points of specification: Saw shaft electric motor power: 2 x 90 kW Godsx Hfvqspfx Aayjkf Maximum blade diameter: 350 mm Maximum material height: 200 mm Maximum distance between horizontal blades: 400 mm Feeder speed: adjustable from 4 to 40 m/min Pneumatic and spring-loaded pressure mechanism Laser-guided sawn timber Saw shaft speed: 3800 rpm All technical parameters given in the last photos Very good condition, the machine has not been used from 2 years. It is connected to the power supply at the time of listing. Price net, VAT invoice included. Disassembly and transport are the responsibility of the buyer.

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min Godpou Niuhofx Aayskf cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump *

Condition: excellent (used), Year of construction: 1997, Pressure capacity 40 t Folding length 2100 mm Clearance between the uprights 1600 mm Projection 220 mm Installation height approx. 300 mm Stroke length approx. 100 mm Working height 880 mm Table width 135 mm Stroke rate approx. 9 / min Table width approx. 240 mm Emptying speed approx. 70 mm / s Working speed approx. 13 mm / s Retraction speed approx. 100 mm / s Drive power 5.5 kW Dimensions L x W x H 2400 x 1400 x 2100 mm Weight 3750 kg Accessories / Special features: - As good as new deer foot upper tool, continuous, can be sawn to any length yourself - As good as new universal die with various openings, 70 x 70 x 2100 mm - Motorized plunge depth adjustment with digital display - Manual backgauge approx. 600 mm with SIKO counter - Fast rapid feed and fast retraction - 2-hand operation, combined with foot switch + EMERGENCY STOP - 2 backgauge fingers - Pressure regulation via potentiometer on the control panel - Control panel, swivel-mounted - CE marking Siegfried Volz Machine Tools Gedpfeu Agk Hox Aayjkf Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2026, Customized paternoster stacking systems in different technical designs for sawn timber lengths from 3.0 - 6.0 m ( length on request ) options: - with/without lath bundling (different versions depending on requirements) - with/without slat magazine single or double chamber depending on requirements with pneumatic gripper Gjdor Nx Tmepfx Aayekf - Infeed and outfeed according to customer requirements

Condition: new, power: 382 kW (519.37 HP), overall weight: 33,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,540 mm, loading space length: 6,100 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal reference number for customer inquiries: 3-039 MAN TGS 33.520 6x4 BL Short Timber Platform Body with Quick-Change Stakes and Crane of Your Choice! Wheelbase: 3,900 mm IMMEDIATELY AVAILABLE FROM STOCK!! * EURO 6E!! * Cab Type TM: the Comfortable one (narrow, long, medium-height) * All-wheel drive 6x4 * Suspension type Leaf/Air (BL) * Main wheelbase 3,900 mm, 1,400 mm wheelbase between rear axles * MAN D2676 LF78 diesel engine, 520 HP, 2,600 Nm torque, Euro 6e * MAN TipMatic 12.28 OD automatic transmission with Retarder 35 * Eco retarder, speed-dependent, multi-stage, energy-efficient * MAN EVBec high-performance engine brake, multi-stage * Differential lock on rear driven axles * Trailer coupling at rear crossmember, RINGFEDER type 4040/G150B * MAN EasyControl operating panel, 4 functions, can be operated from outside with door open * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Multifunction leather steering wheel, height and tilt adjustable * Lower bunk with slatted frame and adjustable headrest * Front windshield sun blind, interior, electric * Pull-out refrigerator and drawer Gjdpjxnn S Isfx Aayokf * MAN SmartSelect infotainment control with touchpad and direct access * MAN Media System Navigation Professional 12.3-inch * MAN Advanced Sound System with subwoofer * Smartphone integration * and much more Bodywork: * Load length up to crane base 6,100 mm (Austria and South Tyrol special) * Platform dimensions: length approx. 5,700 mm, width 2,540 mm * Platform color: black * 8x OPTIPA ALU10 stakes with quick-change wedges, stakes can be removed at any time (for example, for transporting sawn timber, straw, hay, or silage) * Storage for stakes upright in front of the bulkhead * Gear racks between stake pockets * Lashing points in the external frame * Sturdy steel bulkhead * Extendable ladder at front and rear for access to the platform * Prepared for manual strap tensioners (Autonordic) or alternatively pneumatic (ExTe TU) * Stainless steel toolbox under the loading area Crane: Your choice of: - Palfinger Epsilon M12Z Classic 10.5 - Palfinger Epsilon Q150Z 9.6 - TajfunLIV 150Z 9.6 - TajfunLIB 150Z 9.6 cab-mounted crane Financing / hire purchase as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: new, Number of motors 2 Stück 0 2380 mm Control , RUCHSER RU-GL-45° ----- Glass bead saw on the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage Manually movable mounted. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glazing bead saw 45° on RU-SA-3000 ----- for glazing beads up to 30 x 70 mm (W x H)!!!, Mounted on the sliding work table with scanning and Clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually mounted movably. Pneumatic clamping device from above and from Gjdpjxmkz Nofx Aayjkf the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, Working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 1 set of carbide saw blades for for glazing bead saw RU-GL D = 200 mm, 64 teeth, consisting of 1 piece each Saw blade L1233 (left) and L1085 (right), with special grinding 43°. Additional price: 421.00 euros Pos. 1.2 Holding device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing beads Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Item 1.5 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.6 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros ----- Total price i...

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines Gedpfx Aaexaa Ulsyokf * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Gkjdsu Niuzopfx Aaysf Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Gjdpsw Ec Risfx Aayskf Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: new, Year of construction: 2025, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Gsdpfxevzt D Tj Aayskf Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...