Used Sawn for sale (71)

Condition: new, - Fast cutting saw for solid material / profile up to 75mm - autom. loading magazine for bars up to 6300mm length and 3t weight - feed via ball screw - single stroke with 600mm - SIEMENS - electronics / drive / control Rcodpsggytqefx Aa Esk - good parts / first cuts are sorted - on request with conveyor unit for sawn parts - robot connection possible - incl. suction

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, DROZDOWSKI PRP 58 FRAME SAW complete with accessories: - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system Rcedpfxoxawddo Aa Ejk - Roller outfeed table - Saw blade sharpener - Set saw set tool Machine underwent a complete overhaul at the manufacturer's facility – perfect condition. Technical Specifications: Horizontal frame clearance: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Main shaft speed: 330 rpm Feed rate: 0.5 - 2.5 m/min Blade dimensions (L x W x thickness): 815 x 70 x 1.6 mm Maximum number of blades: 12 pcs Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum length of log to be sawn: 1.8 m Minimum board thickness (standard): 13 mm (9 mm with single blade setup) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Overall dimensions of saw: 1.20 x 1.70 x 2.10 m (H) Total length of line with track: 10.00 m Weight with standard equipment: 3500 kg

Condition: new, Year of construction: 2023, SPECIAL PRICE - ONLY FOR A SHORT TIME!!! This machine works with a unique double-cylinder system in this class, which guarantees an enormous strength of the saw arm. In addition, it has an extremely solid design and therefore meets the highest demands in steel construction. The design means that steel beams up to the maximum capacity (610 x 360 mm) can be sawn on both sides. The mitre adjustment is done effortlessly with one hand, the clamping is hydraulic. The saw blade speed is infinitely variable from 15 - 120 meters / minute. This makes the saw suitable for cutting both aluminum and tool steel. The working height is 860 mm. Technical data: Cutting ranges: 90° Round: 360 mm Square: 360 mm Rectangle: 510x360 mm + 45° Round: 360 mm Square: 360 mm Rectangle: 440x360 mm + 30° Round: 330 mm Square: 300 mm Rectangle: 300x360 mm - 45° Round: 360 mm Square: 360 mm Rectangle: 440 x 360 mm - 30° Round: 300 mm Rodpfx Aaoh A H E Ns Ejck Square: 300 mm Rectangle: 300 x 300 mm Motor effective power: 3.0 kW Hydraulic motor: 0.55 kW Coolant pump motor: 0.12 kW Saw blade dimensions: 4800 x 34.0 x 1.1 mm Belt speed: 15 to 120 m / min infinitely variable Standard accessories: - miter adjustment on both sides up to 30° each - Hydraulic clamping of the miter adjustment - Mitre angle digitally readable on mobile control panel - Coolant system with coolant flushing of the saw blade in front of the blade guides - Infinitely variable adjustment of the band speed - Saw blade tension monitoring - User-friendly control panel - Hydraulic clamping vice - hydraulic unit - Rotating chip brush - manual, hydro-mechanical saw blade tensioning - German operating instructions, spare parts list, electrical diagram, hydraulic diagram - Two-tone paint finish: dark gray RAL 7021, yellow RAL 1003 - CE conformity - Micro-Cool cooling spray device complete with universal spray head

Year of construction: 2004, condition: good (used), TR 800 LIGNUMA circular sawmill - for prisms - user manual – feed on the inverter TECHNICAL PARAMETERS: horizontal clearance 480 mm vertical clearance 300 mm min. length of the processed material 1300 mm cutting width 65 - 340 mm height of sawn material 10 - 280 mm the ability to work on 2 and 4 discs type of saw Ø 800 mm power of the main drive motor 37 kW power of the feed drive motor 1.1 kW length of the feeding table 3200 mm Rjdpfektg Shsx Aa Eock receiving table length 2500 mm total length of the machine 7200 mm machine width 1000mm machine height 1060 mm weight 1850 kg The main advantages of the machine: – stable structure – produced by the Polish reputable brand LIGNUMA – a leader among sawmill manufacturers - recommendable – for every professional

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 057, New price ca 100 000.- EUR The Dynagrade equipment is a product for on-line strength grading of structural timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market . It is especially suitable for installation in sawmill sorting lines or planing mills or comparable plants where sawn (or planed) timber is transported by means of an existing cross-conveyor system. The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones). Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m). Main prerequisites: Limber/timber size and length 1): Redpfx Aasu Dnf Io Eock Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm Sawn or planed surface Dried lumber/timber, cut to angle Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)

Condition: new, New manufactured sawline with chipper canters and circular saws. Suitable for producing for example sawn wood for pallet production. Capacity per one shift approx 70 to 90 m3 ready sawn wood. Min log diameters 12 cm Max log diameters 38 cm Rsdpfxewzklaj Aa Eeck Log length from 2 to 4 meters

Condition: new, Year of construction: 2024, Board stacking system: Manufacturer: Stoiber GmbH Model: StoStack 5000 - layer stacking Year of construction: 2024 Condition: New Price & Location: Price on request AT - 4122 Arnreit Description: Universal board stacking system for efficient stacking of rough sawn boards, posts, battens and planed goods. Advantages of the system: - Fully automatic, flush stacking - Air gap stacking - Simple operation via touchscreen - No pneumatics, therefore unrestricted operation even in frosty conditions Technical data: Rcodpfx Aaotv E D Ue Esk - Flexible stacking width: up to 1200 mm - Stacking height: up to 1200 mm - Board length: from 1500 mm - Board/post width: 50 - 300 mm - Board/upright height: 15 - 120 mm - Maximum board/post weight: 75 kg - Maximum layer weight: 500 kg - Cycle rate: up to 25 pieces per minute Options: - Alignment rollers for longitudinal alignment of sawn timber - Ejector for ejecting faulty boards - Electrically adjustable side stands - Mobile machine frame: Use in several working positions by moving the machine on rails or with a forklift

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Vertical top-drive saw FOD GKT 60 F with feeders and collection Machine in good technical condition after bearing replacement and service. New installation and electrical box Basic technical data: Horizontal clearance mm 600 Saw frame stroke mm approx. 400 Clearance between rollers mm 60-550 Smallest diameter of sawn logs mm 100 Largest diameter of sawn logs mm 500 Smallest length of sawn logs mm 2200 Main shaft rotation speed rpm 280 Feed per 1 revolution of the main shaft mm/1 rev. 5 - 20 Maximum number of saws pcs. 12 Rcodpfx Aowp Dqrea Ejk Main motor power kW 30 Feed motor power kW 2.2 Hydraulic unit motor power kW 2.2

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Rcsdovtwzmepfx Aa Ejk Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 6459103320, Technical data KASTOtwin A 2 Dimension standard machine Length 1 755mm Width 2 475mm Height 1 570mm Total weight approx. 1 700kg Total drive power 5.0kW Cutting range in mm approx: Cutting area Ø 260 mm Rcjdstiwz Iepfx Aa Esk Cutting area, flat ( W x H ) 260 x 260mm Smallest dimension round Ø 10mm square, H x W 10mm Material feed length single max. 750mm Multiple feed 9 999mm Shortest cut-off length 6mm Smallest diameter to be sawn 10mm Minimum remaining piece in single cut 15mm Shortest remaining piece length in automatic mode 100mm Cutting speed, infinitely variable 20 - 100m/min Saw blade dimensions 4530 x 34 x 1.1mm Material support height 700mm Cutting feed: infinitely variable Material feed ball screw Hydraulic belt tensioning

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Rcedpoxg Ubyefx Aa Eek Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: ready for operation (used), Packing and stacking machine for sawn wood. Roller conveyor system to handle the ready made packages Rcedpfx Aajk T Aqws Eek are also included in the delivery. The unit can be feeded with a belt conveyor also included or unscrambler ( not included )

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Rsdohpbxiopfx Aa Ejck moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,000 mm, cutting width (max.): 1,000 mm, cutting length (max.): 10,000 mm, power: 23.8 kW (32.36 HP), saw blade diameter: 700 mm, overall weight: 3,800 kg, Equipment: motor brake, The horisontal circular saw mill is designed for the production of radial sawn edged boards and beams from coniferous and hardwood logs by longitudinal sawing with two circular saws in both directions (without idling) at an angle of 90 °. Sawing is performing by movable carriage which is running alongside a fixed log. The log sawing scheme is chosen by the operator individually, based on the shift task and rational log cutting optimization, depending on its diameter. DISTINCTIVE FEATURES: - No need for logs sorting; - Individual sawing scheme for each log; - The possibility of sawing logs with a diameter of 150 to 1000 mm; - Efficient output up to 70%; - High productivity – up to 20 m³/shift (counting by raw roundwood). SPECIFICATION: Dimensions (for a cutting length of 6 m): Length: 3320 mm Width: 2220 mmHight: 2130 mm Track length: 13380 mm Cutting parameters: Max. log diameter: 1000 mm Min.log length: 2000 mm Max. dimension of the cut element: 200 x 200 mm (possibility of increasing the dimension 270x240) Circular saw diameter: 450 - 700 mm Motors: Main motors power x2: 12 - 23,8 kW Shaft rotation speed: 1400 rpm Feeding system Rjdpfx Aov D Rwvoa Eock Feeding motor power: 1,5 kW Feeding motor rotational speed: 1450 rpm Feeding speed: 0-30 m / min *Using saws with a diameter of ø 450 mm, we can get a size max. 150x150 mm, with a saws with a diameter of 550 mm we get max. 200x200 mm, and in the version with a saw ø 630 we get a size of 240x240 mm., With a saw ø 700 the get an ability to increase the size to 270x240.

Condition: excellent (used), Year of construction: 2009, carrying capacity per cantilever arm: 800 kg, load capacity per stand: 8,000 kg, number of shelf rows: 5, frame height: 7,500 mm, shelf length: 1,200 mm, Equipment: double-sided, OHRA Cantilever Racks Year of production 2009 Rcodpfx Aewfm Urja Esk - 5 rows of double-sided racks 120 pcs of columns - Column height 7500 mm - Distance between columns 1250.mm -1600mm - Arm length 1200 mm - arm load capacity 800 kg - column load capacity per side 4000 kg - Number of levels 5 Current capacity approx. 280 pallet places approx. 400 packages of sawn timber up to 3m long Last inspection 06.2024 The racks are currently installed Dismantling on the buyer's side Net price given We can offer a Combilift C4000 LPG 7500mm Triplex trolley for the racks

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2301.14, Sawn timber length cross cut line, timber width 20 - 300 mm, height 10 -100 mm Rcedpfx Aew Rr Dbja Ejk

Condition: refurbished (used), AKE Log bandsaw groups with or without chipper canter unit We can offer different constellations of AKE Log bandsaw type 245 as below: A. Bandsaw groups with 2 , 3 or 4 bands B. Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. C. Rcodpjiv Stijfx Aa Ejk Complete sawline ( type SuperSaver ) Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. Plus board edger unit. Capacity up 35000 m3 of ready sawn wood per year and single shift

Condition: new, Year of construction: 2024, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Rcedpfx Aohpbu Rsa Ejk ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2024, The SQUALO 522 Multiblade or Double Shaft Multiblade Circular Saw is a technological machine, essential in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, trimmed boards, prisms, tablets, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Double shaft multi-blade: Squalo 525 motor powers from 55 to 132 Kw Description Details Conveyor belt width mm 520/620 Width Conveyor rollers at the entrance mm 510 Width Conveyor rollers at the exit mm 610 Max saw group width mm 500 Max cutting height mm 220 Min. Length of work mm 1000/1200 Max passage width mm 800 Rsdpfxslz S Rbe Aa Ejck Blade shaft diameter mm 80 Max diameter circular blades mm 400 Blade hole diameter mm 100 Blade shaft speed rpm 3.800 Speed of advancement mt/min 3 – 60 Weight 9.500 – 10.500 Kg Overall dimensions mm 2720x2515x2105h

Condition: reconditioned (used), Year of construction: 2018, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Rsdpehrdxiofx Aa Eock Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Rcsdpfx Aaeu U Dkfs Ejk Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE