Used Sawmill Alignment for sale (1,346)

Condition: ready for operation (used), table size: 1450 x 2000 mm Itedpfxstp Hg Eo Aa Ish plate thickness: 40 mm table height over base: 800 mm weight: ca. 1200 kg

Condition: used, Year of construction: 1970, functionality: fully functional, Complete, fully operational sawmill line for sale due to restructuring. The entire system can also be purchased in individual components. Ijdpfxox E Sn Ds Aa Ieth Price upon inspection.

Condition: used, Year of construction: 1986, functionality: fully functional, We are offering this used Brenta Vertical Band Saw with automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type Progress 750 Machine no.: 409621 S268 N1143886 Maximum cutting length: 12 meters In the various photos, you can see: - overall view of the saw - saw machine nameplate - saw with extraction pit - automatic line behind the saw - pit under the lower wheel - infeed line from outside - infeed line as seen from inside - outfeed line inside - extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain - collection bin behind the outfeed line - collection bin seen from the other side. With red button operable both here and from the machine room Ijdpfx Aeyxhq Uea Ieth - overview of the outfeed line - machine plate of the saw carriage - saw carriage in the outer position, where the log can be loaded - control room behind the saw - control room interior. Electronic measurement setting and control of all infeed and outfeed lines - wall-mounted electronics across from saw. Control current with relays, which can also be operated manually - Atlas Copco GX 11 FF compressor - Compressor nameplate, year of manufacture 2005 - Grass Air DW 31 air dryer - Stellite adjustment blocks for the guides where the saw blades run through Technical information: - The machine must be supplied with air, hydraulics, and electricity (including control current) - The wheels (upper and lower) were ground approximately three years ago and can last for many more years. - Infeed conveyor control cabinet was renewed in 2025 - At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment. This Brenta vertical band saw with automatic turning carriage is an excellent combination. The listed price is based on the EXW Incoterm, with dismantling by the buyer. If you have any questions or require further information, please feel free to contact us or give us a call.

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Itedpfx Aajwavqlj Ioh Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor Itedow Rg Emopfx Aa Ish - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, PRIMULTINII SIF 1600 band saw, in very good working condition. Itsdpfx Asyha A Tja Ioh

Condition: used, Year of construction: 1993, functionality: fully functional, We are selling our packaging timber sawmill: - Esterer frame saw H30 - EWD step feeder - with stacking system - Costa Multiprisma (35), logs up to 6 meters Itodpfx Ajwbpi Dja Ieh - Costa double-shaft saw type Leopard - Zeno drum chipper - with numerous auxiliary machines The machines can be inspected on site by appointment if interested.

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Iodpfoy Iuuxex Aa Isth

Condition: used, Year of construction: 2007, 4 profiling units VPF340 2x90 kW New subframe LINCK centering system VZM Isdpfx Aaey Adl Nj Ioth LINCK extraction unit CSA

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm Itsdpoyr Dbuofx Aa Ijh - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost.

Condition: used, Steel cast iron straightening and welding plate, heavily ribbed Itsdpodzqrbofx Aa Ieh Heavy-duty straightening plate Length 2000 mm Width 1600 mm Thickness 110 mm Working height 600 mm Plate thickness 30 mm throughout Weight approx. 1000 kg Good condition, good surface

Condition: used, Straightening and welding plate made of cast steel and grey cast iron, heavily ribbed former marking-out and measuring plate heavy-duty straightening plate Iodeu Swb Ispfx Aa Isth Length 2000 mm Width 1000 mm Thickness 260 mm Working height approx. 850 mm Plate thickness approx. 40 mm throughout - 5 pieces height-adjustable feet Weight with feet 1250 kg good condition

Condition: used, Steel and cast iron straightening and welding plate, heavily ribbed heavy-duty straightening plate Length 1600 mm Width 1005 mm Thickness 280 mm Plate thickness approx. 85 mm throughout Iedpfsdzqbajx Aa Ijth - Center hole Ø 245 mm, 400/800 mm - Threaded holes M 20, approx. 55 mm deep - Through holes Ø 27 mm Weight approx. 2.5 t Good condition Former press table – presumably machined parallel on both sides

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V Itodpfx Ajlffdysa Ijh They have manual and Ce.

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation. Iedpfxouf A Aho Aa Ieth

Condition: used, Alignment tester, shaft aligner, laser shaft aligner -Manufacturer: db Prüftechnik, alignment tester Optalign 1.5 Iedsiwuzaspfx Aa Ioth -Accessories: see photos -Dimensions transport box: 420/290/H555 mm -Weight: 20 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min Isdecp Nvyepfx Aa Ieth -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Condition: excellent (used), Overall dimensions length 4500 mm width 1900 mm height 1750 mm height of feeder top 860 mm Weight 1100 kg Dimensions of processed raw material height 280 mm width 300 mm length from 500 to 3000 mm Power supply 400 V (3 phase) Feeder feed smooth, controlled by inverter speed 4-13 m/min Width of the main belt feeder 200 mm Iodpfx Asugp Rnoa Ijth Diameter of pulleys 600 mm Blade parameters length 4000 mm width 30 ÷ 42 mm thickness up to 1,1 mm Raw material pressure spring Setting of cutting thickness manual Throughput per hour up to 3 m3

Condition: excellent (used), Overall dimensions length 4900 mm width 1600 mm height 1950 mm height of feeder top 860 mm Weight 1200 kg Dimensions of processed raw material diameter up to 400 mm Iodpfsugp Imjx Aa Ijth length from 500 to 3000 mm Dimensions of the received prism from 55 mm Main motor power 2 x 5,5 kW Power supply 400 V(3 phase) Electric head extension Feeder feed smoothly controlled by inverter speed 4-9 m/min Diameter of pulleys 600 mm Blade parameters length 4000 mm width 30 ÷ 42 mm thickness up to 1,1 mm

Condition: used, For sale: BRENTA industrial log bandsaw with Progress log carriage Heavy-duty BRENTA industrial log bandsaw (bandsaw / frame) including Progress log carriage, from a professional sawmill. Technical data - log bandsaw Manufacturer: Ateliers de Construction Louis Brenta SPRL (Belgium) Model: ETYELEC Machine serial number: 406341 Iodpfex Ndphox Aa Isth Motor power: 60 HP (approx. 44 kW) Speed: 340 RPM Bandwheel diameter: Ø 1,400 mm Condition Bandwheels and frame overhauled and ground approx. 1 year ago New bearings on the bandwheels Runs smoothly Progress log carriage Heavy-duty industrial design Mechanical roller conveyor with chain drive

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement. Ijdpsyw Sv Eofx Aa Ioth

Condition: good (used), Body lifting and alignment device Itsdpfx Asvdcmvea Ijh Belt conveyor table with lifting and alignment device Fezer vacuum lifter Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), functionality: fully functional, High-Performance Frame Saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained high-performance full frame saw Frame clearance: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and blade suspension Isdpfx Aaoy D Hito Ioth Drive motor and gear unit Electrical control cabinet with control system Splitter wedge type AVER, hydraulically driven In very good condition (optionally COMPLETELY REFURBISHED!) Top condition with remote-controlled tensioning carriage

Condition: used, Year of construction: 2006, For sale: LBL Brente log transport wagon with debarker – year of manufacture 2006 We will be selling a complete series of machines from a sawmill. This is the first machine from this lineup – keep a close eye on our website for additional offers. Ijdjx Ndpbjpfx Aa Ioth Dimensions and technical specifications can be found in the PDF documents.

Condition: new, Year of construction: 2023, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Isdsy Sw T Sspfx Aa Ioth