Used Universal Sharpening Machine for sale (92,074)

Condition: used, Sharpening machine for circular saws/rip saws IDL000829 - manufacturer: IMW Hfedpfxovlczvj Aacjn

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Hfedpfx Aajxliguecsn Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Hedpfxjxlfwps Aacjfn Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Hedpfjxiv Ugex Aacefn Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2026, Ref:10718 . NEW 2026 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) LoCo friction feeder – inner text LoCo friction feeder – top Hfjdpfx Aaot Dpwdecsn Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Including accessories & spare parts. (In-house compressed air supply required). Specification: Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW

Condition: ready for operation (used), functionality: fully functional, This is a heavy duty impulse heat sealing machine from Star Universal - the sealer is a double heat machine which means the top and bottom jaw are heated - the sealing wires are 9.5mm wide and the sealing jaws are closed using compressed air which ensures that even when sealing heavy gauge plastic bags you will get a good reliable seal every time. Active seal bar length is 400mm Complete unit on stainless steel trolley with adjustable bag support platform - operates from a 240 volt AC supply and requires compressed air Ready to ship worldwide Hsdpsw D E Arsfx Aacefn We take care of export documentation and shipping if required contact us for more pictures and videos

Condition: good (used), Universal punching machine Dimensions: 145x120x210 cm LxWxH Hfsdoiki Dbspfx Aacsn

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t Hfedpfx Ajwtpfpjacen ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 68679, Horauf Universal automatic casemaker, year 2001. Only 9,614,945 copies produced. Year: 2001. Number of copies: 9,614,945. Maximum panel/cover size: 720 mm (width) × 410 mm (height); Minimum panel/cover size: 170 mm (width) × 105 mm (height); Panel thickness: 1 mm (min.) – 4 mm (max.); Spine width: from 6 mm (min.) to 80 mm (max.); Maximum speed: 60 covers per minute; Compatible size range: min. 105 × 170 mm, max. 410 × 720 mm; Supported cover thickness: 0.1–2.5 mm. Hfedpoxnhr Ijfx Aacon

Year of construction: 2009, condition: excellent (used), Camwheat Universal Pie machine 2009, Rotary pie machine, eight station, 95mm diameter pies, adjustable temperature controls, up to 1800 per hour, 3Ph Hjdpjv Rgt Hefx Aacjfn

Condition: repair required (used), Year of construction: 2009, functionality: fully functional, Bertuetti Universal SV 200 Flip-Flop Breaker Hfedpfx Aajvxpyrocjn

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industry: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Hsdswdt Ezjpfx Aacofn Reference number: 1210 Availability from: July 2025 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle specifications: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 3500 x 1500 x 700 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Hjdpfx Aeh U Rznoacjfn Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Hfjdpfx Aajxndahecen Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m

Condition: used, Year of construction: 1996, Machine: Console Milling Machine - Universal Brand: MAHO Type: MH1000 Technical Specifications: - Spindle motor: 5.5 kW - 1500 RPM Hedexn Rkgepfx Aacjfn - Feed motor: 3 kW - 1500 RPM - Pump motor: 0.18 kW - 3000 RPM - 70 l/min - Spindle speeds: (18) 32-1600 RPM - Spindle nose: ISA40 - Drill spindle travel; 125mm - Table dimensions against the column: 570x600mm - X travel: 1000mm - Slide travel: 750mm - Z travel: 600mm - X feeds: 10-5000mm/min - Rapid feed: 1.4m/min - Universal table dimensions: 1250x740mm - 360-degree rotating table - Table tilts longitudinally and transversely by approximately 30 degrees - Machine weight: 5500 kg

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Hfodpsw D Hmlofx Aacsn Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 2009, January 2025: The milling head was overhauled (new bevel gears and bearings). Costs 38.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation x-travel 4000 mm y-travel 1350 mm z-travel (Vertical) 1600 mm table surface area 4200 x 1150 mm table load 13 to tool taperISO 50 Hjdpfx Aaew Hfm Ascsfn spindle turning speed - stepless 0 - 3000 rpm Gear steps 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine approx. 37 to dimensions of the machine approx. 12,9 x 6,53 x 3,79 m

Condition: used, Year of construction: 2013, travel -x axis 4.000 mm travel -y axis 1.250 mm travel -z axis 1.650 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 4.000 U/min tool taper SK50 Bed Type Milling Machine - Universal | KIHEUNG - U1250 A+B axis (fully automatic swiveling head): - speed: 4.000 min-1 The machine is in well-maintained condition. A machine video from the production plant will be shared on request. Hfodpfx Asuzadweacsn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U 1250 | U-1250

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Ermak Model EKM80/150MTB universal ironworking machine., Serial number 51273-B690FC. Year 2014. PUNCHING 80-Ton punching pressure Max diameter 40mm at 14mm thickness Max thickness 24mm at 24mm diameter. Throat depth 510mm Stroke length 70mm Cycles/min at 15mm stroke 35 pieces Table size 625 x 550mm Working height to die 1200mm Hjdpsvmzlcefx Aacsfn FLAT SHEARING Flat Bar (Max. thickness) 300 x 20mm Flat Bar (Max width) 450 x 15mm Blade Length 475mm Angle Flange Trim 80mm Working Height 1020mm ANGLE SHEARING At 90 Degree shearing 130 x 130 x 13mm At 45 Degree miter shearing 70 x 70 x 7mm Working height 1225mm BAR SHEARING Round Bar Shearing 45mm Square Bar Shearing 45mm Working height 1355mm NOTCHING Material thickness 12mm Rectangular notching width 52mm Rectangular notching depth 52mm V notcher ( side x side x T) 52 x 52 x 12 Working height 1015mm

Condition: excellent (used), Circular saw Ø 100 to 550 mm, tooth pitch 10 - 40 mm, tooth height 5 to 25 mm, grinding motor 370 Watt/380 Volt, large machine stand for favourable working height, including 2 clamping cones for circular saws with bores from 15 to 85 mm Ø Hodpfolyqthjx Aacofn

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO Hsdpfxexl E Syj Aacefn quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: good (used), Year of construction: 2009, Working hours (dated April 2025): - Machine on: 34.320 h - Control on: 23.218 h - Auto. cycle: 11.987 h * CNC control HEIDENHAIN iTNC 530 * Electronic handwheel * Automatic universal milling head (overhauled in 2018), 2.5 / 2.5 deg. indexing * Coolant device with paper band filter * Cooling through the spindle * Chip conveyor * NC rotary table YRT F 1000/1250 (4th axis): - Diameter 1250 mm - Max. load 3500 kg - Overall height 265 mm - Table top thickness 125 mm - Partial accuracy +/- 2.5" Hodsw Icccopfx Aacsfn x-travel 2500 mm y-travel 1600 mm z-travel 1200 mm Table dimensions 2860 x 1200 mm tool taper ISO 50 spindle turning speed range 20 - 3000 rpm max. torque on the spindle 700 Nm feed range 2 - 10000 mm/min rapid traverse 25 m/min spindle motor 32 kW weight of the machine approx. 25,0 t

Condition: good (used), x-travel 300 mm y-travel 350 mm z-travel 350 mm taper in main spindle ISO 40 Hedpfsxl E Stex Aacsfn table surface area 625 x 380 mm T-slots 8 Stk. turning speeds 40.0 - 2.000 U/min transmission ratio 18 Stk. feed stepless 0 - 500 mm/min quill stroke 60.0 mm distance spindle nose and table min 50 / max 400 mm voltage 400 V total power requirement 5.1 kW weight of the machine ca. 800 kg range L-W-H 1400 x 1100 x 1700 mm from a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot angle/clamping table * Swiveling +/- 30 degrees - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: good (used), x-travel 315 mm y-travel 180 mm z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min voltage 400 V total power requirement 5.1 kW weight of the machine ca. 1300 kg range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable Hsdpfx Asxl E Smeacefn - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: good (used), x-travel 315 mm y-travel 180 mm z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min voltage 400 V total power requirement 5.1 kW weight of the machine ca. 1300 kg Hfjdoxl E Sgjpfx Aacsn range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis * Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis - Control cabinet, installed on the left - Coolant device