Used Blade Grinding Machine for sale (83,834)

Condition: used, Year of construction: 1985, Saw blade grinding machine WMW Werkö SWSK 400, year of manufacture: 1985, connected load 50 Hz, 380 V, 2.0 kW, weight 475 kg, with dust extraction fan Pulsnitz STO5/125-1, flow rate 400 m³/h Qgzm0Hmgq Note: The sale takes place in an online auction against the highest bid. Please follow the link for further information.

Condition: good (used), Year of construction: 1988, Functionality: fully functional, total height: 1,140 mm, total length: 1,460 mm, total width: 800 mm, DDR planer blade grinding machine with wet grinding. Tx2S09Sus A forklift is available for loading.

Condition: reconditioned (used), Functionality: fully functional, Saw blade grinding machine Werkö C0Ujmgtv Type: SWSK 1450 Saw blade diameter: 250mm to 1450mm Machine condition: Very good Mechanically overhauled With dust extraction Complete with steel foundation for stand elevation to grind large saw blades Operating instructions and spare parts list available

Condition: new, grinding wheel diameter 250 mm connected load frequency 230 V Hu3Qxwc 90 - 180 U/min weight of the machine ca. 18 Kg dimensions 470 x 300 x 440 m Knife sharpening device with variable speed Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm

Condition: used, Year of construction: 1969, Saw blade grinding machine, tool grinding machine, grinding machine, circular saw blade sharpening machine, saw blade sharpening machine 2K3X0Luc -Manufacturer: Loroch, saw blade sharpening machine type SW with dust extraction -Saw blade diameter: approx. 50 to max. 470 mm -Whetstone: Ø 150 x 1.5 x 30 mm -Individual components: see photos -Dimensions: grinder 630/430/H1080 mm / suction 300/300/H700 mm -Total weight: 141 kg

Year of construction: 2014, Condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Technical data: - mobile version with motorized forward - reverse drive + steering - mot. grinding stroke forward - backward with speed control - grinding stroke longitudinal forward + backward - mot. contact pressure - grinding pressure regulation - grinding belt dimension approx. 2000 x 50 mm - contact wheel B 60 / D 300 mm - pneumatic connection 6 bar - drive 400 V / 2880 rpm / 7 kW Vkn3Rx72 - space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle -1x chucking groove centered accessories: Bsg0Y8Nf3Y8 Box with div. grinding wheels *

Condition: used, Saw blade grinding machine, tool grinding machine, grinding machine, automatic sharpening machine for circular saw blades Oi727Pprff -Saw blade sharpening machine with partial gear -For grinding circular saw blades up to: Ø 200 mm -Automatic delivery and power off -Dimensions 900/830/H1490 mm -Weight: 498kg

Condition: excellent (used), - maximum length of sharpened knives 600mm - largest working travel of tool slide 660mm - the largest traverse of the cross slide 160mm Bnz78V8Udd2 - largest horizontal travel of the grinding head 140mm - rotation of the grinding head in the horizontal plane 360 degreesni - rotation of the grinding head in the vertical plane ± 30degrees - the largest vertical travel of the grinding head 240mm - has liquid cooling

Condition: good (used), Functionality: fully functional, saw blade diameter: 1,400 mm, grinding wheel diameter: 150 mm, input voltage: 400 V, overall weight: 400 kg, Good machine for sharpening large metal saw blades / segment saw blades . Very little used. Max diameter c:a 1400 mm Uciga3Jq

Year of construction: 1998, Condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED Cg9Bttxqqf WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: as good as new (ex-display), Year of construction: 2024, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Bsclof9Eef3 Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Boclbzg0Avi Online production equipment machine testing available The roundness within 0.001

Condition: ready for operation (used), Year of construction: 1987, Functionality: fully functional, center height: 100 mm, center width: 650 mm, grinding diameter: 200 mm, spindle speed (max.): 2,200 rpm, cutting capacity: 560 mm, No reserve price - guaranteed sale to the highest bidder! Free loading included! TECHNICAL DETAILS Center width: 400 - 650 mm Center height: 100 mm Dqxuer Grinding length: 400 - 650 mm Max. travel: 420 - 650 mm Smallest automatic. Travel approx.: 1 mm Max. inclination: 30° / 150° Speed: 100 - 3,500 mm/min Drive power DC motor: 0.12 kW - 0.30 kW Cross slide Quick adjustment: 30 mm Feed path with handwheel: 25 mm Plunging depth: 1.9 mm/Ø Feed speed in radius: 0.03 - 1.5 mm/min Plunging feed: 0 - 0.04 mm/Ø Drive power: 0.12 kW Grinding headstock Grinding wheel (diameter x width x bore): 350 x 30 x 127 mm Max. set wheel width: 50 mm Drive power three-phase motor: 3 kW Peripheral speed: 30 m/s Speed: 1600 / 1975 / 2200 rpm Coarse adjustment: 170 mm Swivelling to the right: 15 - 30° Workpiece headstock for center and chuck work Speed: 80 / 175 / 380 / 800 rpm Holder cone: Morse 4 Reduction sleeve: Morse 4/2 Spindle passage: 24 mm Swivelling: 0 - 90° Drive power: 0.5 kW Headstock Holder cone: Morse 2 Quill travel: 20 mm (0.79") Accuracy Straightness of the surface line on max. grinding length: 0.0025 - 0.004 mm Roundness accuracy: 0.0004 mm Maximum workpiece weight Between the centers: 20 kg (44 lbs) Cantilevered (bending moment): 612 Nm (120 cm kg) MACHINE DETAILS Total power requirement: 7 kW Space requirement (length): 2,350 mm - 2,850 mm Space requirement (width): 1,480 mm Total weight: 1,600 kg - 1,900 kg EQUIPMENT - Tool headstock overhauled by GSN (not mounted) - Cooling tank

Condition: refurbished (used), Functionality: fully functional, center height: 175 mm, grinding length: 1,000 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 400 rpm, controller manufacturer: Fanuc, controller model: 0i-TF Plus, Completely overhauled cylindrical grinding machine Kellenberger R175x1000 CNC - unused since then! The machine was completely refitted in collaboration with Fanuc and includes: - New control cabinet and new circuit diagram - New CNC control Fanuc 0i-TF Plus - New servo motors and servo drives Fanuc - New balancing system Elaso with GAP - Grinding wheel loader  - Cooling tank with paper filtering - Geometry according to the Kellenberger protocol TECHNICAL DETAILS Control: Fanuc 0i-TF Plus Centre height: 175 mm  Centre distance: 1000 mm Speed: Workpiece spindle head: 20 - 400 rpm C-axis: available Programming: Programs can be created with G-codes or via the user-friendly interface Dqwfrj Table angle shift: 8° (for long parts) Headstock inclination: 90° (for short parts that do not require a tailstock) Table speed: max. 10.0 m/min (infinitely variable) External grinding: possible Internal grinding: not possible Tip grinding: up to 6 different diameters on the same piece Taper grinding: the machine has a table that can be tilted up to 8 degrees for long parts, and for short parts that do not require a tailstock, the headstock can be tilted up to 90 degrees.

Condition: good (used), 60" Table Complete with coolant tank and sizing Specification - Segmental wheel diameter - 864mm / 34" Segments per set - 16 Cw7Cpktv Table diameter and grinding capacity - 1524mm / 60" Magnetic Table diameter - 1524mm / 60" Max. height of wheel to table - 272mm / 22.5" Min. height of wheel to table - 114mm / 4.5" Spindle speed - 450rpm Table speeds - 16 &5.5rpm Automatic feed 10 rates - 0.1-1.0mm/min (0.004-0.040ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 60-100h.p at 960rpm Table motor - 6/2.5h.p at 1440/480rpm Feed motor - 1/4h.p at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3073mm/ 10.1" Floor space - 4394mm/14.5" x 3607mm / 11.10" Approx weight - 16700kgs

Condition: good (used), Snow Rotary Table Ring Grinder Magnetic Chuck Size: 36” (900mm) Diameter Dqt3Dj With Coolant Tank

Condition: good (used), Year of construction: 2009, Robbi IGR-250 Semi Automatic Internal Grinding Machine Magnetic Chuck Ø300mm. Maximum Distance Between Workhead Plate & Spindle Support 1,000mm. Maximum Swing Ø355mm. Centre Height 180mm. Maximum Overhanging Weight 150mm From Spindle Nose 80kg. Table Travel 3-1,000mm. Progressive Speed 0-6,000mm/min. Top Slide Maximum Inclination +8°/-4°. Maximum Workpiece Speed 0-300rpm. Wheelhead Maximum Spindle Ø100mm, Wheel Advance 250mm. S/No. 29005. With Coolant System, Dresser Unit & Manuals. Overall Dimensions L2,900 x W1,500 x H1,700mm. Weight 3,000kg. Dqv3Zt

Year of construction: 2020, operating hours: 1,700 h, Condition: ready for operation (used), Control Unit Brand FANUC Dqycjv Model 31i Main Drive Spindle speed range 40000/90000 Additional Equipment Profibus Interface for Handling System Electrical Driving Unit for Automatic Sliding Door Two-Stage Foot Switch for Permission This cylindrical grinding machine was manufactured in 2020. It features a robust KELLENBERGER 100 design with a CNC Control Fanuc 31i-B, advanced graphic-interface, and a wheelhead UR-RS 1-5-6. It supports non-cylindrical contour grinding and has a grinding wheel flange of Ø 203.2 mm. Consider the opportunity to buy this KELLENBERGER 100 cylindrical grinding machine. For more information about this machine, please reach out to us. Application Types Grinding

Condition: used, Year of construction: 1970, gear diameter 700 mm gear width 280 mm max. module 7 min. module 1,5 clamping length 570 mm max. angle of teeth je 30 ° min. number of teeth 16 Dq0Rop max. number of teeth 240 power capacity 8,0 kW weight of the machine ca. 8,0 t Equipment/accessories: - Coolant system - Change wheels - Clamping device - documentation Machine is in good condition and can be inspected under power.

Condition: used, Year of construction: 1996, Functionality: fully functional, We are pleased to offer this used Tschudin HTG 610 U Cylindrical Grinding Machine from 1996, located in Belgium. Renowned for its reliability and precision, this machine ensures smooth and accurate grinding of various components, meeting the demands of high-quality production. The Tschudin HTG 610 U features a distance between centers of 680 mm, accommodating a wide range of workpiece sizes with ease. With a spindle speed of 500 rpm and a durable 3 kW motor, it delivers consistent performance, making it an excellent choice for demanding cylindrical grinding tasks. This machine is ideal for workshops and industries seeking dependable and precise grinding solutions. Technical specifications: Distance between centers: 680 mm Height of centers: 150 mm Power consumption: 5 kW Spindle taper: #5 Morse Spindle speed: 65 to 500 rpm Swiveling range: 360° Left-hand wheel diameter: 350 mm Right-hand wheel diameter: 250 mm Left-hand wheel width: 50 mm Right-hand wheel width: 25 mm Wheel bore diameter: 127 mm Motor power: 3 kW Table slide travel: 620 mm Dimensions: Length: 2413 mm Width: 1397 mm Height: 1830 mm Dqxwd9 Weight: 2630 kg ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACH advises verifying specifications or else.

Condition: excellent (used), Jones & Shipman 624 Dominator CNC Surface Grinder Under power and working. Can be shown demonstrating at our premises in Burscough Br309Spwdpg Fanuc Series 210i-M CNC Control Table Length 600mm x 200mm width Wheel diameter 250mm Wheel width 25mm Max wheel speed 3200rpm Spindle power 5.6kw

Condition: good (used), Jung Berlin Model D14 Internal Grinder Max Diameter Inside Guard: 450mm Max Diameter Over Table: 450mm Blwcqqdlry Max Distance Between Chuck & Wheelhead: 650mm Workhead Spindle Speeds: 96-568 RPM 3 Jaw Chuck

Condition: used, Year of construction: 1989, max. wheel diameter 330 mm gear width 175 mm max. module 6 min. module 0,5 slide stroke 180 mm clamping length max. 420 mm clamping length min. 145 mm number of teeth 10 - 600 pressure angle min. 10 3Hhhwm2Wk pressure angle max. 45 workpiece weight max. 60 kg tangential adjustment of workpiece 90 connected load 20 kVA weight of the machine ca. 6,6 t Equipment/accessories - Dressing device - diamond wheel - 6 grinding wheel flange - clamping device - documentation Machine is in good condition and can be inspected under power.

Condition: excellent (used), Year of construction: 2014, Perfect PFG-50 150AHR Surface Grinder Year 2014 Fully working condition. We welcome any inspections to view this machine demonstrating. Grinding surface of table - 500 x 1500mm Bsczd7Cb9Yy Max distance centre of spindle to table - 600mm Total max safety load weight - 1200kgs Table guideway - V & Flat way Wheel dimension - 405 x 50 x 127mm Spindle motor - 10HP Machine net weight - 7200kgs Floor space - 4800 x 2300 x 2040mm