Used Router Table for sale (16,906)

Condition: new, table diameter 2500 mm table load 20,0 t Bljdpefv Axmsfx Afmsp swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with Bodpfefv Aykox Afmelp - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. Bljdjfv Ayyjpfx Afmep The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 780 mm table load 1,0 t swivelling range 0 - 135 Grad turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm Bledofv Ay Sepfx Afmjp max. torque on the faceplate 1000 Nm welding current 500 Ampere including remote control and welding current transmission.

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm welding current 700 Ampere Blsdpsfv Azhofx Afmsp including remote control and welding current transmission.

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Bedpfx Afofv Huujmslp Handheld remote control with digital display and foot-operated remote control

Year of construction: 2022, condition: as good as new (ex-display), 3000 kg load capacity welding rotary table, Bledpfx Ajd A Etrofmep very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400 mm Tilt up to 120° Height in horizontal position 1300 mm, tilted to the center 1050 mm Length 2.0 m x width 1.4 m Hand and foot remote control

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Bodjd D D Hlopfx Afmolp Height: min. 0.65 m, max. 1.530 m. Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Very robust.

Year of construction: 2022, condition: new, 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.8 revolutions per minute Bodpfx Afsff Ngiemjlp Very robust, complete set with hand-held and dual-foot remote control Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approximately 700 mm Height adjustment with the disc in a vertical position to the center: 960 mm to 1910 mm Dimensions with the disc in a horizontal position: 1200 mm to 1900 mm We offer the rotary tables with capacities of 600 kg, 1000 kg, 3000 kg, and 5000 kg.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Bljdogp Dymopfx Afmsp Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, number 27 Positionen weight 52 kg condition neu 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Blsdpfxegp Dyuo Afmop Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs.

Year of construction: 2024, condition: new, ✔ It is used to transport the material to the horizontal shredders (suitable for Robust LD/H series) ✔ Length: 4000 mm Bljdpfx Afogtur Ismop ✔ Width: 330 mm ✔ Weight: 470 kg

Condition: new, Year of construction: 2026, load capacity: 1,200 kg, pivoting range: 120 °, Equipment: foot remote control, 1200 kg load capacity, horizontal welding turntable, CE certified 1200 kg load capacity, tilted Bedpfjk Adikjx Afmjlp very robust Complete set Speed continuously adjustable from 0.05 to 0.7 RPM; higher speed available upon request for an additional charge of €250. Turntable diameter: 1200 mm Tilt angle up to 120° Height, horizontal: 870 mm; height, tilted to center: 720 mm Hand and foot remote control Length: 1.35 m x Width: 1.2 m

Condition: new, Year of construction: 2023, 3000 kg load capacity, welding rotary table, Blodpfx Ajlamr Nofmep very robust Speed continuously adjustable from 0.05 to 0.7 RPM Rotary table diameter 1400 mm Tilt angle from 0 to 120° Height in horizontal position 1450 mm, tilted to the center 1250 mm Length 2.0 m x Width 1.6 m with remote control

Condition: excellent (used), Year of construction: 2008, 300 kg load capacity welding rotary table, with hollow shaft diameter 125 mm Bedelamtbjpfx Afmjlp with chuck 320 mm or 400 mm very robust speed continuously adjustable from 0.15 to 5.0 RPM current transfer 350 A rotary table diameter 400 mm tilting up to 135° height in horizontal position 835 mm, when tilted up to the center approximately 735 mm length 850 mm x width 580 mm

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Equipment: foot remote control, 3000 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 0,7 rpm diameter rotary table 1400mm Bjdjl Dq Svjpfx Afmslp inclination up to 120 height horizontal 1300mm, tilted to center 1050mm length 2,0 m x width 1,4 m hand remote control with digital display and foot remote control

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified Blsdel Dq U Uepfx Afmsp

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Bljdpfsit I Sbsx Afmep Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Bljdpfsh Ucqtjx Afmsp • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2010, condition: used, Scissor lift table. Hydraulic, in perfect working order. Specification Year: 2010 Table dimensions: 1000 x 800 mm Lifting capacity: 1 T Bljdpfx Afoun Sm Asmjp Other: Lifting controlled by remote control

Condition: new, table diameter 350 mm table load 100 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW Bledpfx Aoupw Nxsfmep weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm Blsdpfxjupw T Rs Afmep table height 160 mm T-slots 12 mm weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Cross table with turntable

Condition: new, table length 1825 mm table width 660 mm Blodpfxeupxpte Afmjp stroke height 750 mm 20 mm weight max. in kg 450 kg weight of the machine ca. 130 Kg 2,2 x 0,85n x 0,24 m With the lifting table, medium-sized motorcycles, mopeds and scooters can be easily brought to a comfortable working height. The table is equipped with two hydraulic foot pedals. One for pumping up, one for lowering. Device for attaching the front wheel. Incl. access ramp.

Condition: new, number 31 Positionen 22 mm condition neu weight 43 kg Set 1 33-piece, 22mm system, consisting of: Clamps: 4 x 220610.1 Clamps 2 x 220630.1 Bolt: 12 x 220511 Stop: 4 x 220410.N Stop: 4 x 220420.N Bjdpfx Afeulbb Rjmslp Angle: 2 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport.

Condition: new, table load 110 Kg table load capacity 55 kg. vertikal table diameter 250 mm hollow spindle diameter 65 mm chucking diameter 200 mm swivelling range Grad turning speeds 0 - 8 stufenlos U/min total power requirement 0,15 KW weight of the machine ca. 65 Kg dimensions of the machine ca. 0,5 x 0,53 x 0,6 m Welding turntable with - large passage mm Bljdsulbc Ujpfx Afmep - Footswitch - tilt/swivel by hand - Speed infinitely adjustable - 250 amp welding current transmission - Bore in faceplate mm. Demonstration machine documentation only in English.