Used Round Bending Machine for sale (66,153)

Condition: new, number of rollers: 3, roller (bottom) diameter: 76 mm, roller (top) diameter: 76 mm, side roll diameter: 76 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity: 1270 x 1.5 mm - Conical rollers - Removable top roller - Foot control - Emergency stop - Documentation - 400V Dwedpeh Ralqsfx Acyod

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, sheet thickness steel (max.): 5 mm, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, - Capacity: 1270 x 5 mm - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamping) - Digital display for rear roller movement - Digital display for lower roller movement (material clamping) - Hardened rollers - Conical rollers - Pivoting upper roller - Brake motor - Emergency stop - Documentation Dwjdpfx Acogg Rcxsysd - 400V

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Dedpfowpku Djx Acyowd Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 4350, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, sheet thickness (max.): 20 mm, overall weight: 14,200 kg, working length: 2,000 mm, TECHNICAL DETAILS Bending length: 2,000 mm Max. sheet thickness: 20 mm Bending capacity: 15/11 mm Bottom roller diameter: 280 mm Top roller diameter: 300 mm Dsdpfezi D Saex Acyowd MACHINE DETAILS Drive power, main drive: 16.2 kW Drive power, top roller drive: 4.8 kW Drive power, bottom roller drive: 3.7 kW Weight: 14,200 kg

Condition: new, Type: Motorized Working length: 1.050 mm Roller diameter: 110 mm Pre-bending capacity: 4 mm Bending capacity: 5 mm Motor: 2,2KW Minimum bending diameter: 150mm Upper and lower roller driven by a single gear system. Rollers with SAE 1050 quality certificate of high tensile strength. Dwedpfx Aceug Un Ejyed Conical bending system Induction treated and hardened rollers Wire grooves at the end of the rollers.

Condition: new, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, roller diameter: 140 mm, roller length: 2,070 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, - Capacity: 2070 x 4 - Electrically adjustable follower roller - Electrically adjustable lower roller (material clamping) - Digital display for the movement of the rear roller Dedpfx Aohvr Nlecyowd - Digital display for lower roller movement (material clamping) - Infinitely adjustable speed - Hardened rollers - Tapered rollers - Removable top roller - Brake motor - Emergency stop - Documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Dwsdpfxegd T R Ds Acyed Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Dwsdpszza U Uofx Acysd Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while simultaneously offering the lowest overall operating costs. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 21015 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Condition: NEW, showroom machine Availability: 12-14 weeks Performance: Working width 2100 mm Round bending capacity 12 mm Pre-bending capacity 9 mm Standard equipment: • Variable oscillation adjustment of the side rolls VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touch control panel including high-end BENDtronic® control • Infinitely adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electro-mechanical locking system for the rotation of the top roll • Automatic pressure adjustment of the bottom roll • Automatic pressure compensation of the bottom roll cylinder, standard cooling system for ambient temperatures up to 35° C • Automated axis optimization • Automatic shutdown of the hydraulics for the roll position • Ultra-compact design to reduce or even eliminate foundation costs • Safety emergency stop cord Optional equipment: • Two-roll drive for the top and bottom rolls • Taper bending device for bending conically shaped workpieces • Extended cooling system for ambient temperatures up to 45 °C • Upper support for easier bending of large diameters • Side support to assist in bending large diameters Djdpfx Acjxnnf Ijyowd • Gas pressure accumulator for calibrating already welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick change of top rolls • Interchangeable top rolls with different diameters for bending shots with small diameters • Hardened rolls if black and stainless material is to be bent • Infeed roller table for easy feeding of sheets into the machine • Centering device for the infeed roller table, for automatic centering of the sheets before bending Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your needs. Further information on request.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Pipe length: 4 meters Year of manufacture: 2011 6 tool sets Round 22, radius 44 Round 42, radius 84 Round 28, radius 56 Round 18, radius 36 Round 35, radius 70 Dwsdpfx As Agu D Ejcyjd Round 54, radius 108

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 600007090, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, working width: 3,100 mm, sheet thickness (max.): 13 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 280 mm Diameter of lower rollers: 280 mm Max. sheet thickness: 13 mm Max. pre-bending thickness: 10 mm Max. working width: 3,100 mm Bending speed: 5,000 mm/min Drive: Hydraulic Control: Conventional Power: 15 kW MACHINE DETAILS Dwedpfezxdk Ijx Acysd Dimensions & Weight Dimensions (L x W x H): 5,810 x 1,980 x 1,540 mm Weight: 11,500 kg Transport packages: 2 EQUIPMENT CE marking

Condition: used, Year of construction: 2000, Offer 26018 Dodpfx Acsykp A Ioyowd Technical specifications: - Max. working length: 500 mm - Max. sheet thickness: 1.5 mm - Various roller diameters - Drive – brake motor: 400 V / 4.0 kW - Required space (approx.): W 850 x D 1700 x H 1250 mm - Weight (approx.): 0.8 t - Roller attachments: 42; 45; 50; 55; 60; 65; 70; 90; 135 mm

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, side roll diameter: 130 mm, roller length: 1,070 mm, sheet thickness steel (max.): 5 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity: 1070 x 5 - Electrically adjustable idler roller Dwjdpfjirwlajx Acyjd - Digital display for rear roller movement - Hardened rollers - Conical rollers - Rotatable top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: as good as new (ex-display), Year of construction: 2024, turntable diameter: 390 mm, bending angle (max.): 360 °, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Dwedsgqfp Hspfx Acyed Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks!

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. Dwsdpfx Aoz Nhliscyjd The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 10659, roller (bottom) diameter: 300 mm, roller (top) diameter: 350 mm, working width: 3,000 mm, sheet thickness (max.): 25 mm, empty load weight: 24,000 kg, TECHNICAL DETAILS Number of rollers: 4 pcs Max. sheet thickness: 25 mm Max. working width: 3,000 mm Upper roller diameter: 350 mm Lower roller diameter: 300 mm MACHINE DETAILS Dwedpfxoyua Eze Acyod Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,300 x 2,000 x 1,800 mm Unladen weight: 24,000 kg Transport packages: 1 pc.

Condition: used, functionality: fully functional, Year of construction: 1997, 5-Axis CNC Tube Bending Machine BLM Dynamo – 0 Serial number: 605970300001 Year of manufacture: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control: DOC 85C BLM Bar Loader BLM CARM 7 Serial number: 340040102059 Year of manufacture: 2004 Weight: 405 kg Without conveyor belt Without protective guard TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Dwsdet R Tgispfx Acyed Bending capacity, round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity, round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity, round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar loader: BLM Carm 7 (Year: 2004) Positioning speed, X-axis: 2000 mm/s Bending speed, H/Z Y-axis: 500 °/s Rotation speed, Z-axis: 900 °/s Rotation speed, Z-axis: 100 °/s Positioning speed, T-axis: 500 mm/s Measuring tolerance, X/T axis: ± 0.1 mm Measuring tolerance, Y/Z/Q axis: ± 0.1° Maximum reach with maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - ° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control: DOC 85C Ex works Dortmund, free loading onto truck.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 19142, roller (bottom) diameter: 140 mm, roller (top) diameter: 120 mm, working width: 1,250 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. pre-bending thickness: 4 mm Djdpszuwwajfx Acyewd Max. working width: 1,250 mm Number of rollers: 4 pcs. Number of driven rollers: 2 pcs. Diameter of upper roller: 120 mm Diameter of lower rollers: 140 mm MACHINE DETAILS Control system: CNC Drive: Hydraulic Power: 4 kW Dimensions & Weight Unladen weight: 1,450 kg Dimensions (L x W x H): 2,700 x 1,450 x 1,500 mm Transport weight: 1,450 kg Number of transport packages: 1 pc. EQUIPMENT CE marking Documentation

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals Dwedeid Al Nepfx Acyod

Condition: new, Year of construction: 2026, control type: manual, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 1,000 kg, total length: 4,200 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Highly precise press brake for steel, copper, zinc, and aluminum sheets. These press brakes and all common spare parts are available ex stock. Dwedsb Hxzyepfx Acyjd Maximum working length of the press brake: 4200 mm Bending capacity: up to 0.8 mm (steel sheet) Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.0 mm, copper sheet: 1.0 mm Bending angle of the bending machine: max. 160 degrees Cutting with the roller shear across the entire working width Bending ram thickness: 20 mm Cutting with the roller shear across the entire working width Raising of the upper beam in three positions Upper ram stroke: 80 mm Degree scale Weight of the press brake: approx. 810 kg Cutout 60 mm / 45° Roller shear 0.8 mm, additional cost: 350 Euro Manual folding machine, additional cost: 75 Euro Delivery costs: 500 Euro to Germany and Austria Delivery date: every week, Monday/Tuesday Payment upon delivery or prepayment Invoice will be issued with 0% VAT. Your VAT identification number is required for this.

Condition: new, Year of construction: 2026, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, overall weight: 540 kg, total length: 3,440 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client Dsdpeci R Exefx Acyjwd - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm Dwsdpfxszxt Txe Acyod drive elektronisch zwei angetri

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Dwodpfx Aszmt U Eocyod

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): Dwodpfx Ajz Ix Ukecyod The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: used, Year of construction: 1991, functionality: fully functional, weight of the machine ca. 1,5 t ja Dodpfx Acjx Ni E Ieyjwd