Used Round Bending Machine for sale (66,046)

Condition: good (used), Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 Dksdpfeip Eq Djx Acner -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool Dkedpfjb A Swlex Acnjr -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Condition: used, Bending tool, die, lower knife, lower tool, lower beam, Dsdpfx Acscn Rd Ronskr -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 2,5" (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg Dkjdpex Nfhrsfx Acnsr

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine Dkedpfxsx Ir Dwe Acnor -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm -Max. sheet thickness: 2 mm -Roller diameter: 90 mm -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle Dodpsyb R Ndofx Acnjkr -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek Dkjdpfecn Shusx Acnor -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle Dodedy Rhdopfx Acnskr -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine Dsdpfxsyb R Akj Acnokr -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw Dksdpfxeip Eqks Acnjr -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg Djdpfxocx T E Rs Acnokr

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine Dsdpfxoywzlps Acnokr -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: used, Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine Dedpfocn Shrjx Acnekr -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm Dksdjgxgm Hopfx Acner -Dimension: 3060/28/H121 mm -Weight: 65kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: B698, overall weight: 6,000 kg, total height: 1,800 mm, total length: 5,000 mm, total width: 2,000 mm, IMCAR SIHR 8/5 Three-Roll Bending Machine Dkodpfx Aezkhznecner - Bending length: approx. 3100 mm - Roller thickness: approx. 250 mm Note: The item must be collected between September 15 and September 17, 2026, on a date to be determined. FCA D-76474 Au am Rhein - loaded onto a truck.

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Dkjdpfxshgiuho Acnjr Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: new, Year of construction: 2026, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Dksdpfxehgihke Acnsr Return speed: 20mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Dksdjzgci Ejpfx Acnor Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools Dksdpfxsznu Sbs Acnor -CE marking -Bending range 42x3mm -Hydraulic drive -Manually adjustable angle switch -Digital display -Adjustable stroke -Emergency stop function -Three sets of tools: 33.7 mm / 26.9 mm / 21.3 mm -Documentation -400 Volt connection Dimensions: L x W x H 1.1 x 0.7 x 1.5 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm Djdpfx Aexzk I Secnekr sheet width 40 mm

Condition: good (used), Year of construction: 2001, Electrical Connection: 380/400 V, 50 Hz Working Height: 970 mm Width: 2650 mm Depth: 1200 mm Height: 1750 mm Weight: approx. 800 kg Condition: good, second-hand Dksdpfx Aozpa Rlocnjr

Condition: ready for operation (used), Year of construction: 2009, ERCOLINA MB 42 / Mandrel-less pipe bending machine -CE marking -Year of manufacture: 2009 Dkodpfx Acoznm Nfonsr -Bending capacity / steel pipe: 42.4 x 3 mm -Max. pipe diameter, aluminum / copper: 54 x 2 mm -Bending capacity, furniture construction pipe: 48 x 1.5 mm -Solid material up to 30 mm -Max. bending angle: 210 degrees -Electronic control with digital display -Max. 30 program memory slots -Programs with 9 bending operations -Overload protection / Yes -Operation: Dual foot pedal (bending - return) -Max. bending speed: 2 bends/min -Includes 1 tool -1.1 kW -Foot switch -Documentation Dimensions: L x W x H 0.5 x 0.6 x 1.2 meters / Weight 100 kg Errors and omissions excepted.

Condition: new, Finger-setting machine with a segmented top clamp PNEUMATIC CYLINDER!!! Max. setting capacity over the entire working length ----- 1.5 mm Dkedpfx Acjga T Dljnor Max. working length ----- 1500 mm Max. opening width ----- 48 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. setting angle ----- 0 - 135 degrees Weight ----- 430 kg Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Top and bottom blades can be removed in segments. PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Dodpfx Aoga T A Secnokr Max. opening width ----- 43 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. bending angle ----- 0 - 135 Weight ----- 450 KG Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A Djdpozh I Iiefx Acnjkr CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!