Used Roto Casting for sale (4,083)

Condition: used, Year of construction: 2013, operating hours: 3,923 h, load capacity: 4,000 kg, lifting height: 18,000 mm, fuel type: diesel, construction height: 3,000 mm, gearing type: automatic, Roto telehandler from Merlo, RT 38 / Roto 40.18 S * Model RT38 / Roto 40.18 S * All-wheel drive * Year of manufacture 2013 * Operating hours 3923 as read on counter * Lifting height approx. 18 m * Max. load capacity approx. 4000 kg * Max. reach approx. 15.5 m * Single cab with 1 seat * Driven by a 6-cylinder Perkins diesel engine, 4x4x4 * Top speed 20 km/h * Triple-telescope steel construction * Tire size 405/70-R20, profile 15-20 mm, wheelbase 2750 mm * Overall dimensions (length x width x height): 6250 x 2300 x 3000 mm * Gross weight 13,900 kg, * Hydraulic 4-point outrigger support 4,700 x 3,900 mm, * Pallet fork, tine length 1,200 mm, radio remote control Further specifications and additional images are available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Please also visit our website. Prsdpfx Aov R Rqcoa Eef

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Zinc melting furnace ZSO 600 / 700 B Pjdou S N Ahepfx Aa Esrf

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: DS550, VACUUM LIFTER PANEL SYSTEM DS550 ROTO Vacuum device for installation of all types of roof and horizontal wall sandwich panels at various inclination angles, additionally equipped with 180° panel rotation. The most versatile model in the PANEL SYSTEM product range. Available with radio control, and with single or dual vacuum circuits. Can be suspended from any type of crane, HDS, or forklift. Lifting capacity: 400 kg Control: Radio remote Power supply: Battery (up to 8 hours of operation) Battery charge indicator: Yes Mounting position: Horizontal Number of suction cups: 8 Number of arms: 4 Material dimensions: 1-16 m Dual circuit system capability: Yes (optional, extra charge) Device weight: 200 kg Pedpfx Ajwuryfja Ejrf

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Psdpfx Aovnrz Dja Ejrf

Year of construction: 2013, condition: as good as new (ex-display), -for manual grinding parts Prsdpfxod Ealhs Aa Eof -Power: 0.75 kW -Stepless speed adjustment -Supply: 230 V -Demonstration machine built in 2013 -incl. wheels K150 / K180 / K220 -Weight: 120 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler was serviced three months ago. During this maintenance, among other tasks, the slew ring bolts were replaced, and both machine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Prodpfxexr Axde Aa Esf Lifting capacity at max. height: 1,500 kg Lifting capacity at max. outreach: 150 kg Slewing turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine power: 107 kW / 145 HP Fuel tank: 150 l Performance Speed 1st gear: 16 km/h Speed 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrics System voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent four-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock carriage Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent four-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Note: The winch (€4,000) and the platform (€1,000) can be purchased separately if required.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Price for the tools: 97,500 EUR Prsdpfx Aaou Ivc Ne Eef

Condition: good (used), functionality: fully functional, FRECH DAK 580-62 DRC Die-Casting Machine, used Machine number 430302, pressing force 5800 kN, opening force 155 kN, maximum opening stroke 680 mm, double toggle lever (mould lock), pressure chamber design cold chamber, press-in force 589 kN, filling piston diameter 60 to 110 mm, filling volume of pressure chamber 1101 to 3700 cm³, specific pouring pressure 642 to 2155 bar, largest blast area approx. 274 to 920 cm³, clamping plates 1120 x 1120 mm, clear width between columns 700 x 700 mm, mould Prsdpfx Aswc Tn Toa Eef height max. 800 mm, min. 350 mm, mold area 446 x 446 mm, 4 columns, column cross-section 140 mm³, software version SBS 20.10 VISUALIS 17.10, including dosing furnace MELTEC AVDF 1200/5000, year 2016, Serial number 3376/16, handling robot ABB, spray head, temperature control unit REGLOPLAST 300DG/12/FM30/1K/RT45, serial number 371412, without year of manufacture. Technical attributes dimensions (l x w x h) approx. 8000x5500x3500mm weight approx. 36000kg year of construction 2000

Condition: good (used), Year of construction: 1987, Waste compactor with rotating compaction unit. It can be continously filled. Manufacturer: Bergmann Type: PS 8100-L Manufacturing year: 1987 Overall dimensions: 1500 x 1600 x 2200 mm Weight: 800 kg Useful size: -Grinding drum diameter: 1040 mm -Grinding drum height: 850 mm Grinder rev: 8/min Prjdpjk E Exqsfx Aa Ejf Electrical data: Voltage: 220 / 380 V Electrical power: 1,1 kW

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Pedpfxoh Nycao Aa Eerf

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE Prodpfx Aaswpr Ufo Esf

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Width: ~4920 mm Length: ~14020 mm Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar Predort Tw Dspfx Aa Ejf

Condition: used, functionality: fully functional, Specifications: - (54) 22'' x 8'' x 3'' - 7.5 kg capacity moulds on transfer chain - Propane burner Predpfx Aajwtzpys Esf - CSA approved

Condition: good (used), Year of construction: 2001, functionality: fully functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1000 mm, clamping platens 1300 x 1300 mm, column distance 825 mm, column diameter 180 mm, casting force max. 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1539 to 4523 cm³, operating pressure 160 bar, drive motor 45 kW, with dosing furnace MELTEC AVDF 1200/5000, year 2017, serial number 3469/17, 30 kW, handling robot ABB, year 2007, with control system, spray head, power supply unit in control cabinet missing, pump defective, as spare parts donor Technical attributes dimensions (l x w x h) approx. Pjdpowc Tdzsfx Aa Eerf 8000x7500x3500mm weight approx. 36000kg year of construction 2001

Condition: ready for operation (used), Nippon Gerotor 100-2PC-2AH0-HL Index Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Prjdpfx Aei D I Uvsa Eef

Condition: good (used), End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm Predpfx Aajb A Rbfo Eof -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 10 kg

Year of construction: 2001, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping Prjdovgdpdspfx Aa Eef 12,000 revolutions per minute 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: about 350 kg Very good condition

Condition: excellent (used), Catalogue number 7766 TECHNICAL SPECIFICATIONS - Diameter of processed rods: 12mm/16mm/24mm - Sequence: - Input - 2 rubber feed rollers - 2-knife cutting head - Sleeve - 2 rubber feed rollers - 2 rubber idle rollers - 2 rotation speeds + forward/reverse - Interchangeable tool head - Feed motor 2×0.25kW - Main motor 3.1kW - Extraction nozzle diameter 90mm - Dimensions (L/W/H): 1140x770x1100mm Prsdpfx Aaexl D Ito Eof - Weight: 136kg ADVANTAGES - Not repainted - Compact size - Interchangeable tool head - DTR technical documentation - Second-hand dowel making machine, in very good condition Net price: 6,500 PLN Net price: 1,550 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Machine with 3 work stations and 3 transport clamps Electromagnetic linear motor Complete SCHIRMER BAZ 100-G4/SVU centre with stations connected by a "REAL BUFFER" system for time compensation and reinforcement zone. More flexible "Flat-Line" version to accept all types of profiles. For cut profiles up to 3.750 mm (PVC can be cut and machined from 3.750 to 4.450 mm with manual extraction) Control under WINDOWS TWINCAT with BECKHOFF C6140 PC with touch screen. The first station has an automatic loading table for 9 profile bars, a transport clamp with an electromagnetic linear motor, and two work modules, one for machining PVC bars, with 4 CNC axes, rotating with 6 high-frequency motors to work at any angle, and another for cutting with a 500 mm saw blade with variable angles between -45º and + 45º. Label printer and a second extraction clamp with an electromagnetic linear motor to reduce transport times. REAL INTERMEDIATE BUFFER with 27 slots with independent movement to make station times independent, with 8 positions for manual insertion of reinforcement, with indicator lights. Prsdpfx Aaouhm N Do Eef Second SBZ-I station with electromagnetic linear motor transport clamp, two work modules, one for screwing, with two screwdrivers (one for frames and one for leaves) with automatic feeder for one type of screw, and the second module has 2 CNC axes and the following drilling motors for PVC + reinforcement: - 1 horizontal drilling unit with a diameter of 6.5 mm (posts and fixing to the work) - 1 horizontal drilling unit with a diameter of 3 mm (locks and square marks) - 1 horizontal drilling unit with a diameter of 3 mm (locks and square marks) - 1 vertical drilling unit from below with a diameter of 3 mm (for hinges) - 1 vertical drilling unit from above with a diameter of 3 mm (for hinges) - 1 vertical drilling unit from below, triple head for 10/12/10mm handles Output table with motorized belts. Complete fence with electric closing doors. Possible to see the machine in use until October 11 Exworks price, operational, without warranty Installation, programming and warranty with optional extra cost (only in Spain)

Condition: excellent (used), Year of construction: 2011, Glazing bead saw centre ROTOX GZS 399 incl. glazing bead feed and inkjet printer, running direction from left to right, operated in single shift Predex Em A Ajpfx Aa Esf

Condition: ready for operation (used), Nippon Gerotor 100-2PC-2AH0-HL Index Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Podpfx Aoi D I Uyoa Eorf

Condition: good (used), End mill, shank mill, milling cutter -Six-cutter -Finishing cutter -Diameter: 32 mm -Usable length: 200 mm -Type: HSSE N30 -Quantity: 9 pieces -Sale: only complete set Prodjb A Rbaopfx Aa Eef -Weight: 12 kg

Year of construction: 2001, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Predpfx Aajwudhne Eef Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: about 350 kg

Condition: good (used), – 2 pneumatic clamps – 380V Prodsxndcpjpfx Aa Ejf

Year of construction: 2012, condition: excellent (used), ROTOX welding and cleaning line from left to right, consisting of ROTOX SMK 504 welding machine and EPA 472 cleaning machine with turning station, operated in single-shift mode, Windows control on both main machines, maximum welding dimension: 3,500 mm x 2,500 mm, currently programmed for VEKA profiles, 1 set of safety fences. Pedpfsx Dy Tcex Aa Ejrf