Used Roto Casting for sale (4,076)

Condition: used, Year of construction: 2021, functionality: fully functional, Bespoke Hot Table, we built to cast hot polyurethane components, we were holding tool temps at 110 degrees to cast the parts. So perfect for molding casting or curing. Also with close down sides to protect the bed when not in use. Heat Transfer Oil S2 machined Aluminum table with oil ways for circulation we found to be much more efficient than electric. Using a Tool Temp TT-181 reconfigured for oil usage - directly by Tool Temp temperature 0-150 degrees ( we have never tried higher) Circulation cut off valve for flow and return Heat Pipes changed before decommissioning Spare pump connectors provided Being sold as the department has closed and the machine is no longer required. Sizes Heated Bed 600mm wide x 1800mm long x 60mm thick Bed Height 930mm Table sizes Rcodpfxoxpxmxj Aa Ejk 660mm Width 1860mm total length Closed Height 970mm Full working condition - Ex works Aylesbury Buckinghamshire England, we can export at a additional cost. Can be seen working

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11886=GP3980, Year of construction: 2008, load capacity: 4,500 kg, lifting height: 20,800 mm, fuel type: diesel, mast type: free lift with telescopic boom, construction height: 2,950 mm, power: 106.65 kW (145.00 HP), motor manufacturer: Iveco, gearing type: automatic, overall weight: 14,500 kg, total height: 2,950 mm, total length: 6,600 mm, total width: 2,400 mm, color: green, Equipment: all wheel drive, cabin, head guard, lighting, pallet forks, power assisted steering, trailer coupling, Telescopic Handler Merlo 4521 MCSS, Equipped with a 6-cylinder Iveco turbo diesel engine, hydrostatic drive, 2-speed transmission (11/20 km/h), tires 18-22.5 16 PR Mitas MPT06, cab with heating and air conditioning, split door, 360° all-round visibility, adjustable seat, front, rear, and roof wipers, sun blind, 5-in-1 joystick (electro-proportional), fully electronic control of all functions, 4-section telescopic boom, hydropneumatic self-levelling (automatic or manual control), 4 outriggers, continuous rotating slewing ring, hydraulic steering (3 steering modes), permanent all-wheel drive, fixed front axle, oscillating and lockable rear axle, disc brakes, parking brake, computer-assisted stabilisation control (MSCC system), 12V electrics, platform pre-installation, hydraulic quick-change system "ZM2", including remote control, pallet fork, large work platform, 900 L bucket, and winch. Rcedpfxjx Ir Nts Aa Ejk

Condition: used, Year of construction: 2013, operating hours: 3,923 h, Equipment: all wheel drive, Roto telehandler from Merlo, RT 38 / Roto 40.18 S * Model RT38 / Roto 40.18 S * All-wheel drive * Year of manufacture 2013 * Operating hours 3923 as read on counter * Lifting height approx. 18 m * Max. load capacity approx. 4000 kg * Max. reach approx. 15.5 m * Single cab with 1 seat * Driven by a 6-cylinder Perkins diesel engine, 4x4x4 * Top speed 20 km/h * Triple-telescope steel construction * Tire size 405/70-R20, profile 15-20 mm, wheelbase 2750 mm * Overall dimensions (length x width x height): 6250 x 2300 x 3000 mm * Gross weight 13,900 kg, * Hydraulic 4-point outrigger support 4,700 x 3,900 mm, * Pallet fork, tine length 1,200 mm, radio remote control Further specifications and additional images are available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Please also visit our website. Rodpov R Rqiofx Aa Eeck

Condition: used, Year of construction: 2020, operating hours: 2,213 h, Equipment: ABS, all wheel drive, Albach Diamant 2000 Wood Chipper Year of manufacture: 06/2020 Engine hours: 5,730 h Rotor hours: only 2,213 h! Engine: Volvo TAD 1643 [770 HP / 566 kW] without AdBlue (!) Rotor: GEN 7, 23 degrees Feed width: 1,230 mm Feed height: 980 mm Rotor speed: up to 420 rpm Max. throughput: 450 m³/h Accelerator: GEN2 Max. road speed: 80 km/h Crane: Epsilon S110 Max. reach: 10.1 m Load at 10.1 m: 1 t Grapple: Epsilon FG 31 Tyres: Nokian 645/65 R42 high speed (80 km/h) Lifting cab 2x front outriggers Rockinger trailer coupling Central lubrication system Compressed air hose reel + compressed air supply in cab 2x 230V power sockets 2x fire extinguishers Remote control for discharge chute Dometic refrigerator, radio Chute and rear-view camera Passenger seat Dimensions: Length: 10.43 m Width: 2.55 m Height (cab raised): 3.95 m (eye level at 4.80 m) Weight: 32,000 kg Please arrange an appointment in advance! Rcodpfxsw D Itge Aa Eok On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will gladly assist you. Further information available on our website. Subject to errors and prior sale!

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, For sale: Roto Passat 980/N Koenig Maschinen – used rotary oven The Roto Passat 980N is a rotary oven designed for baking high-quality bakery products. Smooth power control ensures optimal baking results for all types of rolls and breads. The oven has undergone a complete overhaul at our Cream Serwis facility in Poland. Details: Prepared for oil or gas firing, Without baking trolleys, 99 programmable work programs, Baking surface up to 11 m², Designed for 18- or 20-level trolleys for trays sized 580 x 780 mm or 580 x 980 mm, Computer control via touch panel with adjustable airflow intensity in the baking chamber, Includes 1 NEW gas or oil burner, Welded oven construction. Rsdpox Hx Tpsfx Aa Eeck If you are interested in our offer or require more information, please contact us. We invite you to inspect the unit at Cream Serwis in Prudnik.

Year of construction: 2001, condition: ready for operation (used), Shot Blasting Machine, PARTICLE BLASTING MACHINE, Shot Blaster Units, , Schlick Particle Blasting, Roto-jet, Used Machine Manufacturer: USF SCHLICK, Heinrich Schlick Model: Roto-Jet, 24/23457 Year: 2001 Installation dimensions: 4560 x 3920 x 5080 mm Electrical Cabinet, PLC: - Siemens S7 1200 Rodpfxjrk D Tno Aa Eock - Servomotor Controller 2 - Siemens Simatic HMI Display - 400 V ; 20 A Particle Blasting Chamber: Equipped with a servomotor, which synchronously drives the rotating table and the screw conveyor. Another servomotor provides the vertical movement of the particle sprayers. The chamber is lined and has doors that can be opened from multiple sides, with one side having a lifting opening. Table size: 900 mm in diameter. Maximum object size that can be placed: 1000 mm x 1000 mm in diameter Extraction System: Ensures the extraction of dust resulting from spraying, which it can perform in its own airspace. Equipped with bag filters on the exhaust side and cartridge filters on the extraction and dust separation side. Cup-type Distributor and Particle Sprayer Tank: The cup-type distributor transports the shot to a collector after the screw dispenser, which has a 3-stage filter for cleaning the particles (vibrating filter). The tank has outlets where the dosage of particle spraying can be regulated. - It is possible to connect to 10 adjustable particle spraying points. - Currently, 5 particle spraying points are connected.

Condition: used, functionality: fully functional, machine/vehicle number: 2487138, Year of construction: 2021, load capacity: 5,500 kg, lifting height: 20,500 mm, fuel type: diesel, power: 108 kW (146.84 HP), color: yellow, fuel: diesel, Equipment: all wheel drive, cabin, pallet forks, Technical data: Lifting height: 20.50 m Rated load capacity: 5500 kg Rcjdetz Sfxepfx Aa Eek Max. Power: 108 kW Engine: JCB ECOMax T4F All-wheel drive, all-wheel steering, continuously variable hydrostatic transmission, fully functional, general signs of use

Condition: used, Continuous Casting Machine Rodpsxixkwsfx Aa Eeck

Condition: used, Year of construction: 2012, operating hours: 4,537 h, Equipment: all wheel drive, Roto telehandler from Merlo, RT 4025 / Roto 45.21 MCSS * Type RT4025 / Roto, all-wheel drive, * Year of manufacture 2012, * Operating hours 4,537 according to the meter, * Lifting height approx. 21 m, * Max. load capacity approx. 4,500 kg, * Max. reach approx. 18 m, * Single cab with 1 seat, * Powered by a 6-cylinder Iveco diesel engine, * Top speed 20 km/h, * 3-telescope steel construction, * Tire size 445/65-R22.5, tread pattern 7-15 mm, wheelbase 3,000 mm, * Overall dimensions (length x width x height): 6,700 x 2,450 x 3,000 mm, * Total weight 15,500 kg, * Hydraulic 4-point linkage Supports 4950 x 4950 mm, * Pallet fork, tine length 1200 mm, * Radio remote control * Rust damage, see pictures Redpjwmiqxsfx Aa Ejck Further details and additional pictures available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Please also visit our website.

Condition: used, Year of construction: 2022, operating hours: 119 h, Equipment: all wheel drive, Magni RTH 6.30 telehandler, year of manufacture: 2022, operating hours: only 119!, quick coupler, pallet forks, radio remote control, work basket preparation, 3rd hydraulic circuit, air conditioning, pressurized cabin, radio/CD, touchscreen display, ROPS/FOBS cabin, engine: Volvo Penta [160 kW/204 HP], automatic leveling, variable outriggers, 20 km/h (optional 40 km/h), maximum lifting height: 29.80 m, maximum lifting capacity: 6,000 kg, ready for immediate use, very good condition, Rcsdpfowxif Hsx Aa Ejk Optional for an additional charge: - Work basket, - Winch 1.5 to 5 tons, - Load hook, - Bucket, We can provide you with a leasing or financing offer upon request. Mr. Mihm (Tel. +49 1 800 800 800) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted!

Condition: used, fuel type: diesel, operation weight: 12,800 kg, Year of construction: 2000, operating hours: 11,000 h, Equipment: pallet forks, standard shovel, Merlo Roto 30.16 EV telehandler Year of manufacture: 2000 11,000 operating hours 12,800 kg Lifting capacity: 3,000 kg 2x boom extension up to 16 m Quick coupler Rsdpexvri Hofx Aa Eeck Forks, bucket, lifting hook and work platform with controls included Rotating upper carriage

Condition: good (used), machine/vehicle number: 48706927067478, Year of construction: 2018, operating hours: 2,843 h, load capacity: 4,000 kg, lifting height: 26,000 mm, overall weight: 16,000 kg, enginetype: Diesel, manufacturer: Merlo Rcjdpfx Aew Ry I Uoa Ejk

Condition: used, functionality: fully functional, machine/vehicle number: 2487108, Year of construction: 2020, load capacity: 5,500 kg, lifting height: 20,500 mm, fuel type: diesel, power: 108 kW (146.84 HP), color: yellow, fuel: diesel, Equipment: all wheel drive, cabin, pallet forks, Technical data: Lifting height: 20.50 m Rated load capacity: 5500 kg Max. Power: 108 kW Rcjdpfx Aetz Sfrea Eek Engine: JCB ECOMax T4F All-wheel drive, all-wheel steering, continuously variable hydrostatic transmission, fully functional, general signs of use

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Rcodpfx Aajx Dmgvj Eok Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: used, Year of construction: 2014, operating hours: 4,600 h, Equipment: all wheel drive, Roto telescopic handler from the manufacturer Merlo, RT 4025 / Roto 45.21 MCSS * Type RT4025 / Roto, all-wheel drive, Rcsdpfsw E U Adex Aa Esk * Year of construction 2014, * Operating hours 4600 according to meter readings, * Lifting height approx. 21 m, * max. load capacity approx. 4500 kg, * max. outreach approx. 18 m, * Single cab with 1 seat, * Powered by 6 cylinder Iveco diesel engine * Maximum speed 20 km/h, * 3-telescopic steel construction, * Tire size 480/65-R22.5, tread 15-21 mm, wheelbase 3000 mm, * Overall dimensions in length x width x height 6700 x 2450 x 3000 mm, * Total weight 15500 kg, * Hydraulic 4-point support 4950 x 4950 mm, * Pallet fork, fork length 1200 mm, further data and pictures on request, this description is not a binding offer and may contain errors, no guarantee on all information. Please also visit our homepage

Condition: used, Year of construction: 2018, operating hours: 2,812 h, Equipment: all wheel drive, Magni RTH 6.35 SH telehandler, year of manufacture: 2018, operating hours: only 2,812h! 1st hand, quick coupler, pallet fork, radio remote control, workman basket preparation, 3rd hydraulic circuit, air conditioning, pressurized cab, radio/CD, touch screen display, ROPS/FOBS cab, engine: Mercedes-Benz [170kW/231hp], EPA sticker on engine, automatic levelling, variable outriggers, 20km/h (optional 40km/h), max. lift height: 34.90m, outreach: 27.00m, maximum lifting capacity: 6.000kg, weight: 23.950kg, good condition, ready for immediate use! Optional against surcharge:, - Workman basket, - winch 1,5to to 6to, - load hook, - shovel, On request, we can make you a leasing or financing offer, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! _____ Magni RTH 6.35 SH telescopic handler, year of construction: 2018, working hours: only 2.812h! only one owner, quick coupler, pallet fork, radio remote control, preparation for work platform, 3rd hydraulic circuit, air conditioning, overpressure cabin, radio/CD, touch screen display, ROPS/FOBS cab, engine: Mercedes-Benz [170kW/231HP], EPA sticker, automatic leveling, variable outriggers, 20km/h (optional 40km/h), maximum lifting height: 34.90m, horizontal reach: 27.00m, maximum lifting capacity: 6.000kg, weight: 23.950kg, very good condition, ready for work! Optional extra charge :, - work basket, - winches 1,5to to 6to, Rcodpfxsrnfvne Aa Eek - load hook, - bucket, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved!

Condition: new, Atlas Copco ROTO Synthetic Fluid FOODGRADE 20 liter container Also available in 5 liter containers From stock sale Rcedpfx Aasvkf A He Ejk We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Rcodpfjxm Uf Sox Aa Esk Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: used, Paint casting machine, paint casting machine, paint casting station -Paint casting machine -Manufacturer: Burkle -Max. Casting width: 1290 mm -Adjustable casting gap: via handwheel with display -hydraulic: height adjustable Rcodpfx Asc R Iyaoa Eok -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: used, Year of construction: 2011, operating hours: 7,003 h, fuel type: diesel, Equipment: cabin, head guard, * Total weight: 12,650 kg * Year of manufacture: 2011 * Maximum load capacity: 3,800 kg * Remote control * 4 hydraulic outriggers * Roto-steering Redpfx Aasv Sl Dge Eeck * All-wheel steering * Front-wheel steering * Crab steering -----Internal vehicle number: 10736----Subject to errors and prior sale.

Condition: used, Year of construction: 1972, functionality: limited functionality, FRECH DAM 100, year of manufacture 1972. General overhaul by Brescia Presse in 2000. The hydraulic system was converted to an external two-stage hydraulic pump with tube cooler. Mold spraying system Wollin, cooling belt and holding furnace RAUCH MO 125 E by RAUCH. Further details and pictures on request. Redpfxsxn Sp Do Aa Eock

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-15, Technical data: - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - weight approx. 2500 kg Rsdpsgu Dwpofx Aa Eeck - Separate control cabinet with high frequency device for - high frequency tools

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Rjdpfowywn Eex Aa Eock

Condition: used, Year of construction: 2012, operating hours: 4,537 h, load capacity: 4,500 kg, lifting height: 21,000 mm, fuel type: diesel, construction height: 3,000 mm, gearing type: automatic, Roto telehandler from Merlo, RT 4025 / Roto 45.21 MCSS * Type RT4025 / Roto, all-wheel drive, * Year of manufacture 2012, * Operating hours 4,537 according to the meter, * Lifting height approx. 21 m, * Max. load capacity approx. 4,500 kg, * Max. reach approx. 18 m, * Single cab with 1 seat, * Powered by a 6-cylinder Iveco diesel engine, * Top speed 20 km/h, * 3-telescope steel construction, * Tire size 445/65-R22.5, tread pattern 7-15 mm, wheelbase 3,000 mm, * Overall dimensions (length x width x height): 6,700 x 2,450 x 3,000 mm, * Total weight 15,500 kg, * Hydraulic 4-point linkage Supports 4950 x 4950 mm, * Pallet fork, tine length 1200 mm, * Radio remote control * Rust damage, see pictures Redpfx Aowmircsa Esck Further details and additional pictures available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Please also visit our website.

Condition: used, Year of construction: 2016, operating hours: 1,786 h, * Engine power: 73.4 kW * Year of construction: 2016 * Weight: 13,700 kg * 4x props * Reversing camera * Air conditioning * Pallet fork * Load hook Rcedpsviqgzefx Aa Ejk -----Internal vehicle number: 9626----Errors excepted & subject to prior sale.