Used Rotating Arm Wrapper for sale (12,511)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) Hjdez Iq Trepfx Akiow - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Condition: new, Year of construction: 2026, functionality: fully functional, empty load weight: 240 kg, load capacity: 2,500 kg, Rotating device Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: New Technical condition: very good Description: Good, ready-to-use condition, as returned by the previous owner // good working condition, as back from the pre-owner Hodpfx Asz Idtrekiew - without fork arms (available at an extra cost) - 180° swivel angle (standard left-hand rotation)

Year of construction: 2017, condition: excellent (used), Ferrari Sistemi IM 1050 Cheese Wrapper Manufacturer: Ferrari Sistemi Model: IM 1050 Machine Type: Automatic Cheese Wrapping / Packaging Machine Country of Manufacture: Italy Application: Cheese processing and packaging Technical Description The Ferrari Sistemi IM 1050 is an industrial automatic cheese wrapping machine designed for the packaging of cheese products within an automated or semi-automated cheese processing line. The machine is suitable for use in dairy and cheese-processing environments and is designed for continuous industrial operation. Its stainless-steel construction and food-processing design make it suitable for hygienic cheese production and packaging applications. Hodpjz Dvl Esfx Akiow Individual piece or complete cut & pack room available Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Hsdo Af E D Hopfx Akisw Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, System: • Hexagon Absolute Arm 8340, 7-Axis • RS6 Kit • CP-C Installed • Magnetic Base with Mounting Ring • Certified Length Standard – 1016mm (40 inch) • Leap Frog Kit Computer & Software: • Inspire Single Seat License • BendingStudio TUBE • BendingStudio CAD Wizard Hodpfx Aeymnvrekisw

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Hedpez E Imqsfx Akijw Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Condition: good (used), Year of construction: 2008, Supervac GK 840 B Shrink Wrapper 9.9 KW 23.2 amp Hjdpfx Asqu U D Djkiew 700mm Belt Width Three Phase Power Fully Stainless Steel

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Travel range X-axis: 1,200 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Certified test bar for 1,200 mm measuring range Hode Afhr Tjpfx Akiow Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Condition: new, mileage: 100 km, first registration: 10/2026, fuel type: diesel, tire condition: 100 %, axle configuration: 8x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2027, Equipment: crane, trailer coupling, = Additional options and accessories = - Power take-off (PTO) = Remarks = Crane Remote control: ✓ Rotator: ✓ Clamshell bucket: ✓ These cars will be newly built with expected delivery in April/May 2027. THESE WILL RECEIVE AN EXEMPTION FOR THE ZERO-EMISSION ZONE UNTIL 2040!! Some features: DAF XF480 8x4 triple Last axle steerable and liftable Palfinger 20 tm Z crane with remote control Palfinger hook arm etc PHOTOS ARE OF AN IDENTICAL VEHICLE, which we have already sold in the past. = More information = Axle configuration Front axle 1: Steering; Tyre profile: 100% Front axle 2: Steering; Tyre profile: 100% Rear axle 1: Double wheels; Lift axle; Steering; Tyre profile: 100% Rear axle 2: Double wheels Functional Crane: Palfinger Q200 Z EPOSOLUTION !! RADIO REMOTE!!, year of manufacture 2026, behind the cab Extendable superstructure: Yes Condition General condition: very good Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Hodpfx Akoz N Ey Djisw Passenger cars: Website: Email:

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : Hedpfx Ako Agfkleijw The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever racking – NEW Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Center distance: 131 cm - NEW – immediately available from stock. - 750 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized finish. - Cantilever arms in hot-dip galvanized finish. - Arms are bolted on. Hodpfx Ako Af S Ahjiow - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Racking consists of: - 04 x uprights, incl. base approx. 416 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE 100 - incl. all necessary connecting elements and screws. Why BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities of the racking uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are delivered in a hot-dip galvanized finish. This means they can be installed both indoors and outdoors and will not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets according to DIN EN 15048-1. - Long reorder guarantee - Upright base and upright back are welded together, providing additional safety and shorter assembly times, as the feet do not need to be screwed to the upright back. - Connections made of angle steel, eliminating the need for adjustment with tensioning bolts. This shortens assembly time. - No elongated hole system, thus no weakening of the upright profile. Price: €2,653.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Our recommendation: Let us know your requirements… We will be happy to assist you in realizing your projects, from planning to ordering to assembly. Delivery can be arranged by us at a favorable price upon request.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Hedpj Af Tg Nofx Akisw Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. Hedpfx Ao Agfkpskijw - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. Hjdpfx Ae Agfkhekiew - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Hsdpfxe Af Sxto Akijw Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. Hedpo Agfkaefx Akiow - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm Hjdpfx Ae Agfkwekijw - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Two-hand control or foot pedal operation. Hodpfx Aoz S Uxhekiow Equipped with an additional safety guard.

Condition: excellent (used), power: 221 kW (300.48 HP), fuel type: diesel, color: other, mast type: telescopic, Equipment: air conditioning, General information Year of manufacture: 2018 Year of construction: 2018 Operating hours: 7.499 Drivetrain Drive: Track Engine type: Liebherr D936 Weights Empty weight: 50.500 kg Functional Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Front View Camera - Hammer/sorting function - Liftable cabin - Radio Bluetooth - Rotation function - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: France Hedpfx Asw I Htfekiew Condition CE type: CE Liebherr R946 with 27 meter cosben telescopic arm, Standard excavator equipment with hydraulic quick coupler, 2 x digging bucket and hydraulic tilting bucket, Hydraulically lifting cabin, Cameras, CE & Complete documentation available.

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. Hjdps Agghtefx Akiow You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Marden Edwards Limited semi-automatic shrink wrapper and heat tunnel. Supplied with new belt. Manufacturer: Marden Edwards Limited Shrink wrapper: Model - ES 60. Serial number - W3710. Heat tunnel: Model - M25-40T. Serial number - W3708. Date of manufacture - 2012. Tunnel aperture dimensions - 515mm wide x 410mm high. Hsdpfx Aezwxv Njkiew Film roller - 595mm long. Sealing bar - 640mm long. Cutting knife - 620mm long. Height between sealing bar and rollers at maximum height - 345mm high. Electrical requirements - 230 V / 50 hz / 1 phase.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 Hedpfx Akjy Unmujiew 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Model - Swift.  Date of manufacture - 2011.  Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, · Max. Tragkraft 6000 kg · Max.Hubhöhe 25.90 m · Maximale seitliche Reichweite 21.70 m · Gesamtlänge mit Gabeln 9.28 m · Länge bis zur Vorderseite der Gabeln 8.08 m · Gesamtbreite 2.50 m · Gesamthöhe 3.10 m · Gesamtbreite der Kabine 0.96 m · Bodenfreiheit Maschine 0.38 m · Radstand 3.05 m · Kippwinkel 12 ° · Schüttwinkel 110 ° · Drehung des Oberwagens 360 ° · Gewicht 18000 kg Hsdpfx Aezzrtcjkijw · Gabeln Länge / Gabeln Breite / Gabelquerschnitt 1200 mm x 100 mm x 60 mm · Reifenmodelle 445/65 R22,5 · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FHT-6SMU1 · Nennleistung Verbrennungsmotor / Leistung 156 Hp / 115 kW · Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Kühlsystem des Motors Wasserkühlung · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatisch · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 8600 daN · Parkbremse Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Fassungsvermögen des Kraftstofftanks 270 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 68 dB · Umgebungsgeräusch (LwA) 108 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm Hedpfx Ae Af S D Uekijw - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Hjdsvw I Niopfx Akiow Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.