Used Room Humidifier for sale (985)

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 15m2 – used: Price ex works: €2,500 (net), disassembled, packed, and loaded! Item 4: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Roof can be walked on with a maximum load of 100 kg Element width: approx. 1.03m Length: approx. 4.28m (4 elements) Depth approx.: 3.60m (3 elements, plus one narrow element) Height: approx. 2.96m 1x door All offices are closed on three sides and therefore have one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale without furniture, etc. Condition: good Cjdpfx Aozqzzbec Tjrg Available: from approximately Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 150 m2, several rooms – used: Price ex location: €19,500 (net), disassembled, packaged, and loaded! Item 8: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible for personnel, max. load 100 kg Element width: approx. 1.03 m Length: approx. 21.40 m Crodpfjzqzyqox Ac Tsg Depth: approx. 7.60 m, or 8.10 m (6-7 elements) Height: approx. 2.96 m Several doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale excludes furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Set of 4 modular office units, room-in-room system, two-story, including staircase, approx. 139m2 – used: Price ex-works: €19,950 (net), disassembled, packed, and loaded! Item no. 11: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, likely 2014 Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Crjdpfszqzuusx Ac Teg Length including staircase: total approx. 14.51m Width of “gap” for the staircase: approx. 1.27m Right block, top and bottom: Length: approx. 4.60m (4 elements and one narrow element) Left block, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Ground floor height: approx. 2.70m Total height approx. 5.40m 4 doors All offices are closed on three sides and therefore stand with one side against the hall wall Includes lighting, etc., as available Ground floor without flooring, upper floor with flooring Sale excludes furniture, etc. Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Condition: good (used), Spiral Cooler with Refrigerated Chiller Room In good working condition Chiller Room dimensions 5.4mtr x 4mtr Spiral Cooler 660mm wide wire mesh belt 13 floors high, 170mm high between floors Complete with refrigeration compressor. Codpen Tmh Sofx Ac Tjrg In use at present

Condition: excellent (used), Year of construction: 1986, X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Tool holder: SK 40 Drive power: 8.1 kW Crsdpfszkhubjx Ac Tjg Includes Heidenhain 3-axis digital display Includes various tools Includes machine vise Includes rotary table Includes additional angled milling head

Condition: good (used), functionality: fully functional, Feed rates continuously adjustable in all 3 axes Spindle travel 60 mm Table surface 600 x 250 mm Spindle speeds 45 - 1950 rpm Feed rates 10 – 470 mm/min...continuously adjustable... Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Crodpjzucrijfx Ac Teg Vertical travel (Z) 320 mm

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Csdpfx Ajpcgy Roc Terg

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with a 3-axis Elesta-Visulesta digital display. Fixed angular table, SK 40 spindle mount. In very good, operational condition, from an institute. The machine can be demonstrated under power by arrangement. Cjdpsg Nw Rzsfx Ac Terg

Year of construction: 2001, condition: good (used), Multifunction punch, punch, hole punch, pneumatic punch -pneumatically operated Csdpfxob A H U Io Ac Terg -Year of construction: 2001

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier Base Board, Steam Generator Board Cedpfoy Awxijx Ac Tjrg -Manufacturer: Hygromatik, MP humidifier control display -Type: MP E-2522450 -Dimensions: 155/50/H95 mm -Weight: 0.3 kg

Condition: used, Humidifier, Humidifir, Humidificateur, Hymidificador -Handover: in its current condition as inspected -Control unit: does not switch -Rated output: 13 kg/h -Operating voltage: 380 V -Power requirement: 9.8 kW -Quantity: 1 piece available -Dimensions: 360/530/H995 mm -Weight: 38 kg Cjdpfx Aceb Uf N Ao Tjrg

Year of construction: 1995, condition: used, Pneumatic press, pneumatic punch, multifunction punch, punch, universal punch, punching machine -for window construction: tools -pneumatic: with foot control -with various tools: -pneumatic: operated Crsdpfxjdkx S Eo Ac Teg -Air pressure: 8 bar -Pressure force: about 3.2 ton. -Stroke max.: 20 mm -Dimensions between stands: 250 x 200 mm -Dimensions: 505/510/H1360 mm -Weight: 90kg

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 -Type: M4 Codped Tq Rxefx Ac Tsrg -Weight: 0.3 kg

Condition: used, Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine -Pressure force: 0.23 ton -for: window making tools -pneumatic with: foot control -pneumatically operated -Air pressure: 12 bar -Stroke: max. 50 mm Codpsd Dvgnjfx Ac Tsrg -Insertion height: mm -Dimensions: 690/720/H1485 mm -Weight: 51 kg

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier The Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be regular tap water or fully demineralized water. The heat generated by the heating elements heats the water to a temperature of 100°C. Technical specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Crodsu Eb A Nspfx Ac Tog Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4" G male Steam distribution For optimal humidifier performance, the produced steam must be distributed evenly throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with vented steam distributors or steam lances. The choice of steam distributor depends on the room into which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), vented steam distributors (optional) with a motorized fan should be used. However, if steam is to be distributed via ducts or air handling units, Steam lances are used, which utilize the speed of the air flowing through them for humidification. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, maximum load weight: 19,680 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2009, Year of construction: 2009, Equipment: ABS, Manufacturer Eurotank Model 3 axle ET-26-4 ADR 25.500 L 4 rum Year 2009 Condition Good Serial Number YF908S16S95049774 Ref. nr. 7832 Reg. date: 30.06.2009 Disc brake: ? ABS: ? Rear axles: SAF Suspension: Air Tire Size: 385 / 55R22,5 Cover% left 20%-40% -40% Toolbox: ? Total weight: 24000 Kg Crodpewlydyjfx Ac Tog Net weight: 4320 Kg Load capacity 19680 Kg Tank: 25500 L Compartments: 4 (10000 L + 5000 L + 5000 L + 5000 L)

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets Cedey Nfqmjpfx Ac Tsrg For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Here we offer you a Defensor steam humidifier. Defensor Mk5 resistance steam humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifiers are manufactured according to the current state of the art and the recognized safety regulations. Nevertheless, improper use of the Defensor Mk5 steam humidifier can pose risks to the user and/or third parties and/or cause damage to property. Cjdpfjzd Uk Nsx Ac Terg To ensure safe, proper, and economical operation of the Defensor Mk5 steam humidifier, observe and follow all instructions and safety precautions in this installation and operating manual. Defensor Mk5 Visual series For indirect or direct room air humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 Max. steam output in kg/h 80.0 400V/3~/50...60Hz Mk5 ... 80 Unit A: 40 kg/h Unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° Crjdev Td Elepfx Ac Tog B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 155 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min Cjdpfxjzip Hij Ac Terg rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,20 x 2,30 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: repair required (used), Machine number: 1464 Type / Model: FUW 250/IV Travel ranges x-y-z: 400 - 220 - 400 mm Table: 630 x 350 mm Table clamping area: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle connection: SK 40 Crsdpfx Ajd Hl Stsc Tjg Feed rate range, longitudinal: 6.3 to 1,250 mm/min Feed rate range, transverse: 6.3 to 1,250 mm/min Power consumption: 7.4 kW Accessories / Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,470 mm, total width: 5,000 mm, total length: 10,000 mm, type of input current: three-phase, space requirement width: 60,000 mm, space requirement length: 12,000 mm, space requirement height: 3,500 mm, temperature: -4 °C, Equipment: documentation/manual, 2x RIVACOLD BEST W R290 cooling units on the left side PRICE REDUCED BECAUSE WE NEED THE SPACE. Crjdpfoyiakwjx Ac Tsg

Condition: used, machine/vehicle number: 2806-0743, x-travel:800 mm y-travel:550 mm z-travel:500 mm table surface area:(B x T )1000x550 mm spindle turning speed - stepless:0 - 5000 U/min feed speeds - directly programable:2- 6000 mm/min rapid traverse:6,0 m/min quill stroke:80mm mm Tool bore:SK40 total power requirement:12 kW weight of the machine ca.:3,9 t dimensions of the machine ca.:(LxBxH) 2200x2800x2400 mmxmmxmm Deckel FP5 NC Universal Milling Machines - CNC - Swivelable left or right) 90 ° & Tilting Vertical Spilndle Head - Rigid Fixed Table: 1100 x 550 mm (Max. Load 450 kg) - High RPM on Both vertical and Horizontal Spindles - Powerful 9,0 kw AC drives for Main Spindle Credpfx Aocxxngsc Tjg - Equipped with Electronic handwheel and handheld rapid travel attachement - Dialog 4 - 3D Path Control System. - Seperate Power cabin, Chip tray

Condition: used, machine/vehicle number: 420285, x-travel:1120 mm y-travel:420 mm z-travel:620 mm spindle taper:SK 40 Crsdpfxscxxm Ij Ac Tog spindle speeds:30-2000 1/min table dimension - longitudinal:1600 mm table dimension - cross:400 mm

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Crsdpew I Uizofx Ac Tjg Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim