Used Room Humidifier for sale (980)

Condition: new, Year of construction: 2020, operating hours: 200 h, functionality: fully functional, SHOWROOM machine, the advertised machine was never delivered and was only run for test purposes. Rotating doypack wrapping machine DEAP-8BT: The 8-station rotating horizontal filling and sealing machine fills and seals doypack stand-up and seals Doypack stand-up pouches with cycle times of up to 50 pieces per minute. minute. The compact design of the rotary machine is very space-saving and flexibly adjustable to different bag widths. The rotary-type machines in the AP series are the cost-effective alternative to complex linear filling machines without time-consuming set-up times. The stand-up pouches are transported via a transported via a bag magazine and filled and sealed in 8 rotating workstations. sealed. Applicable products: The DEAP-8BT series reliably packs - Pet food - Cosmetics (shower gel, soap) - Food (e.g. muesli or dried fruit) dried fruit) - small parts Machine information: - Quick format change of the bags - Additional modules can be integrated (gas flushing, weighing systems, double sealing) - Touch panel control, with storable programs programs - Central gripper adjustment - Customized special design - for special widths or special feeding systems - up to 50 pieces/min (depending on bag size) Other information: - Safety standards: CE conformity, DIN standards - Noise level: Below 80 decibels according to DIN 45635 - Applicable bag types: Pre-made stand-up pouches, flat pouches, spout pouches, pressure seal pouches, slider pouches, gusseted bags, single-lip Gedpfx Astuwf Ejfnobh (depending on optional components - Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films - Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This advertisement refers to the packaging machine and not the multihead weigher.

Condition: used, mileage: 10,131 km, power: 300 kW (407.89 HP), first registration: 10/2005, overall weight: 24,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x4, empty load weight: 14,300 kg, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: steel, Year of construction: 2005, operating hours: 870 h, Equipment: ABS, additional headlights, all wheel drive, differential lock, Base carrier for sweeper: - Boschung - Jetbroom BJB 8000 - Year of construction 10/2005 - 10.131Km - 870 operating hours - Webasto parking heater - Axles: Kessler & Co (72.0748.3 D) - Snow plow mounting plate - Engine: Deutz Diesel 300kw (BF6M1015C), Euro II - Angular gearbox: Röchling 59-16-M-3 - All-wheel drive, dif. locks - Allison 6-speed automatic transmission - Windshield heating - Electr. mirrors - el. FH - 8710mm x 2500mm x 3650mm (lxwxh) - permissible GG: 24.000kg - Vmax: 85 km/h - rear blower motor is removed, vehicle without brush / snow plow You can find a video of this offer on You can find our entire vehicle stock at Godpeqxt Rnefx Afnjbh Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Year of construction: 2024, condition: good (used), functionality: fully functional, For sale: a high-quality cleanroom, recently constructed and previously used for injection moulding production of medical products. The cleanroom was installed in 2024 and is currently being dismantled due to the cessation of activities. General information: • Area: approximately 500 m² • Year of manufacture: 2024 • ISO Class 7 • Previously used in a medical production environment Godpfx Aoygl I Sefnsbh • Cleanroom will be delivered completely empty • All walls and modular panels are included in the sale Design and construction: The cleanroom is built from modular panels, offering maximum flexibility for the buyer regarding reconstruction and layout. This makes the cleanroom particularly suitable for: • Medical injection moulding production • Assembly of medical devices • Pharmaceutical applications • Electronics, cosmetics, precision assembly • Dryroom • Box-in-Box production The modular design allows: • Full freedom to configure the layout according to your requirements. Additional panels can be sourced from the original supplier if needed. • Relocation and reassembly of the cleanroom at a new site (supplier support available). • Easy expansion or downsizing of the space. Condition and availability: • The cleanroom is in excellent condition, recently constructed and professionally maintained. • Dismantling is currently underway, making quick availability possible. • Complete plans and layout details are available upon request. For further information, additional specifications, or to arrange a viewing, please contact us.

Condition: not inspected (used), Lubot & Wakker Type: 1 pallet vacuum chamber Capacity: up to 2.000 Kg (6-8 charges) hr Completely stainless steel Dimensions chamber: L x W x H = 2.200 x 1.700 x 3.400 Weight: 1200Kg Godefxyqrepfx Afnjbh Electric: 380V 3P+N+E, 7,25Kw Compressed air: 6 bar Drinking water: 3 bar aprox. 1250 ltr/hr Features: Controll cabinet vacuümpump mix-tank water preparation Storage tank with pump valves etc as-is or tested and adjusted to customer choice

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Gjdpfoxftqdex Afnjbh Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory Nr.2210049, machine equipped with : Gedpfx Aedr R Tcefnebh - 1 workbench NEW 2000x800 mm with Urphen platte blue 2000x800x50 mm      1 foot, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bed for overhead drive 1 W-20 headstock without gear reduction and drawbar, revised 1 revised screw-operated carriage 1 revised aligned tailstock 1 motor 380V/50Hz/3ph. 2 speed 1 set of collets W20 1 chuck 2x3 jaws Ø 100 mm on w-20 flange 1 new set of Multifix tool holders including - 1 turret Multifix A with AG20 stud - 3 tool holders AD1675 - 1 bar holder AH2085 1 self-tightening drill chuck cap 1-13 mm on MT2 stud 1 male center MT2 OPTION 1 used tensioner with new belt CHF 500 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: excellent (used), Heraeus Type: HA 2472 BS Cleanroom workbench for installation and operation in laboratories Gbjdpfovyd Adox Afnjh Interior dimensions: 1,800 mm x 580 mm x 830 mm (length x depth x height) Lighting, gas connection Condition: used Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine - Gbedpfsw Imptsx Afnsh

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dehumidification capacity: ≤ 50 l/24 h Gbedpfx Afetty Raensh Air volume: ≤ 265 m³/h

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Gsdsuy Thmopfx Afnobh Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, overall weight: 128 kg, ambient temperature (max.): 46 °C, pressure (max.): 13 bar, MACHINE DETAILS Weight: 128 kg Gbsdpfx Afeydnyxsneh Max. air pressure: 13 bar Max. ambient temperature: 46 °C

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Gbsdpjx Eifkefx Afnjh Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 512 mm, total height: 1,952 mm, total length: 772 mm, Directly from the manufacturer, the original from Apfel GmbH. Fully assembled including 2 KRB 4700 shelves 1 storage box KEN 6422 (No. 62) 2 storage boxes KEN 4322 (No. 42) 1 waste garbage can made of sheet zinc 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Load capacity: 400 kg Gbodpfouvigpex Afnoh Dimensions: 512 w x 1,952 h x 772 t Structure powder-coated in black gray RAL 7021 (body) Various designs and special solutions possible, we as the manufacturer will support you with your wishes! (See pictures 3+4)

Year of construction: 2018, condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 24 OUTPUT 2.4 M3/MIN, YEAR OF PRODUCTION 2018 THE DEHUMIDIFIER IS FULLY FUNCTIONAL. Gbjdpfx Afsi Att Sjneh

Year of construction: 2014, condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 30 CAPACITY 3 M3/MIN, YEAR OF PRODUCTION 2014 THE DEHUMIDIFIER IS FULLY FUNCTIONAL. Gedei Atudspfx Afnsbh

Condition: new, Cucinesse Evolve Kitchen Showroom display model, unused Evolve Made in Italy The Evolve collection is featured in the "Light On Design" catalog, a curated project celebrating the perfect fusion of artisanal precision and industrial expertise. Gbsdpox Eyrwofx Afneh With its sophisticated design and meticulous attention to detail, the Evolve model creates an inviting and tactilely appealing space where materials take center stage. Manufacturer: Cucinesse Italy Model: Evolve Sand-Beige Type: Kitchen Island Worktop: Trespa Marble Effect Nero Street Worktop Height: 94.5 cm Kitchen Island Length: 362.5 cm Kitchen Island Width: 103.5 cm Kitchen Island Height: 94.5 cm Washbasin: Reginox Undermount 50x40 cm Dishwasher: Beko BDIT38531DC 60 cm Refrigerator: Miele K7733E, 178 cm, 320 Liters, Soft-Close Cooktop: Bora Puxu Induction Cooktop with Extractor, 83x50 cm Tap: Not Included Oven: Not Included Tall Cabinets Length: 300 cm Width: 60 cm Height: 220 cm Without Gaggenau steam oven, Gaggenau vacuum drawer, and Faucet Disassembly and removal by buyer Disassembly by our installation team is also possible (€1200) Item location: Utrecht, Netherlands Find more items – new and used – in our shop! International shipping costs on request

Condition: good (used), Working travels 500x350x380mm Table size 790x360mm Spindle taper ISO40 Spindle speeds 63-4000 rpm Active digital read-out Misc accessories Gsdpjff R Slofx Afnjbh MARCELS MASCHINEN CH

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Gedpfx Aou Eqixjfnjbh Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR1000KB PETROL-POWERED SWEEPER INCLUDING SNOW BLADE AND COLLECTION CONTAINER SWEEPING MACHINE PETROL ◾ Impressive cleaning performance for outdoor applications ◾ Powerful 6.5 HP 4-stroke petrol engine – ready to use even in cold weather ◾ Robust sweeper with 100 cm working width – ideal for large courtyards, paths & expansive areas ◾ Includes snow blade, collection container & snow chains – suitable for year-round use, including winter maintenance ◾ Effortless operation – user-friendly, requires minimal effort ◾ Adjustable brush angle (left / right / straight) – efficient cleaning in all directions ◾ 3 forward gears & 1 reverse gear for optimum maneuverability ◾ Large-tread pneumatic wheels with differential lock – excellent grip on any surface ◾ Fully supported: Guaranteed spare parts supply & workshop service Gbedjw Af I Sepfx Afnjh Maximum cleaning performance – all year round The SCHORR RR1000KB is a high-performance petrol sweeper, providing versatile all-round support on farmyards, walkways, or company premises. With a reliable 4-stroke petrol engine (196 cm³), you remain independent of weather or mains power – simply start up and go, even in frosty conditions. 100 CM SWEEPING WIDTH FOR LARGE AREAS & PRISTINE RESULTS Thanks to its wide sweeping brush with wear-resistant synthetic bristles, this petrol broom easily handles leaves, dirt, grit, spreading material, or even snow. The sweeper is perfectly suited for year-round use on driveways, pavements, forecourts, or industrial yards. The brush rotation is powerful and consistent, ensuring even compacted dirt is thoroughly removed. Built for tough outdoor applications Coarse-tread pneumatic tyres with differential lock guarantee optimal traction, even in damp or icy conditions. The robust steel frame delivers outstanding resistance to impacts and vibrations – ideal for daily, intensive use. Designed with maintenance in mind: all key components are easily accessible. COMPLETE SOLUTION WITH SNOW BLADE & COLLECTION CONTAINER Supplied with a heavy-duty snow blade featuring a rubber edge, which can be installed in just a few steps. Matching snow chains for both drive wheels are also included in the delivery. Also convenient: the large debris collection container efficiently gathers swept material. This saves time and effort, as no follow-up sweeping is needed. The motorised sweeping broom features a reliable 4-speed transmission with 3 forward and 1 reverse gear, allowing you to select the ideal speed and direction at any time. The brush unit is pivotable. Technical Data Manufacturer (Short Code): SCHORR Manufacturer’s Model: RR1000KB Fuel type: Petrol Engine: 1 cylinder 4-stroke petrol OHV Power: 6.5 HP Main brush diameter: 1000 mm Brush rotation speed: 180 - 350 rpm Starter: Recoil starter Weight: 81 kg Main Dimensions Overall length: 1480 mm Overall width: 1100 mm Overall height: 1250 mm

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH Gbjdpodr E Apefx Afnoh

Condition: used, functionality: unexamined, machine/vehicle number: SS-15R, Used Tiger-VAC SS-15 R cleanroom vacuum cleaner Manufacturer: Tiger-VAC Model: SS-15 R Includes additional connection hoses. Gsdpfsxuqpiex Afnobh Operates with an external suction system.

Condition: used, functionality: unexamined, Used stainless steel mobile cleanroom cabinets / cleanroom trolleys Dimensions: 134cm x 64cm x 120/125cm Gedpfx Ajxuqnfsfnjbh Minor differences between cabinets (wheel size, internal volume), see photos Price per unit.

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Gbodpfskw Ukusx Afnjh Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: used, functionality: unexamined, color: white, Plastic cleanroom transport boxes Gbjdjxn Ninopfx Afneh Lockable from top and bottom External dimensions: 78 x 117 x 104 cm Internal dimensions: 65 x 103 x 90 cm

Condition: not inspected (used), functionality: unexamined, Used Cleanroom Mobile Scaffold Two Platform Heights: ~1.29 meters ~2.29 meters With manual. For indoor use only. Gbjdpfx Aoxiv Hijfnsh Max 250kg per work platform.