Used Romer for sale (118)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Dcsdpfxofzccns Aqvop 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, functionality: fully functional, Specifically designed for small businesses and wheel coating operations. Complete system consisting of: Dsdpsg Ngt Nsfx Aqvscp Powder curing oven, dimensions: width x height x depth 1200 x 1600 x 1200 mm, 15 kW Powder coating booth, dimensions: width x height x depth 2000 x 2240 x 920 mm Latest powder spray gun from the ROMER ProfiSpray series All together for 17,990.00 net, plus shipping and installation.

Year of construction: 2019, condition: new, Recirculating air convection furnace Gas-fired furnace CGN Powder coating oven NEW – SGS-800/O Gema Optiflex Width: 2500 mm, Height: 2500 mm, Depth: 12500 mm Directly from the manufacturer. For more information, visit Romer-Deutschland. Djdpfxscw Tzxs Aqvjcp

Year of construction: 2019, condition: new, Powder coating system Mini – for beginners The Spark / ROMER® powder coating system Mini consists of: Powder oven SLS-9 small (Internal dimensions: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approximately 12 to 16 weeks after the order Dcjdpfx Ajctx Irsqvep Shipping costs will be calculated individually. (Self-collection is also possible) To provide you with a detailed offer for a system tailored to your specific application, we require further details regarding the application and batch size. We will then promptly prepare an offer for a suitable system with the dimensions you require. Payment terms: 30% down payment and the remaining 70% upon notification of shipping readiness.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Dcjdpfx Ajfz I D Doqvop - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Dcodefzb Rcopfx Aqvsp Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Dcsdpfx Aefz U S Eeqvep This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, Year of construction: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion coating), intermediate drying, an electrostatic coating zone (booth/powder coating station), and a curing oven. The workpieces are transported through the system by a conveyor system. Dsdpfxjcv Nl Rs Aqvjcp Our company, ROMER®, plans, manufactures, and assembles complete powder coating lines. Our systems can be inspected and tested at our facility in Hürth near Cologne. Request a quote for a system tailored to your specific application.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Dsdsf Aaalepfx Aqvecp • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2020, Model: KPZ-2 Type: Enclosed Working dimensions: 900 W x 1300 H x 900 D External dimensions: 980 W x 2100 H x 1600 D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of filters: 3 Filter area: 22.5 m² Dcedpfx Aqeb Al Sbevep Fan: Aluminum Fan noise level: 74 dBa Air flow: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available upon request.

Year of construction: 2024, condition: new, functionality: fully functional, Forced-air curing oven Powder coating oven NEW SLS-90/O * D+t Through-feed oven, divisible Working dimensions: 1400 width x 2000 height x 6500 depth Overall dimensions: 1920 width x 2810 height x 6800 depth Power supply: Electric Rated power: 90 kW Voltage: 380V Frequency: 50-60Hz Door type: 2 doors on each side - through-feed oven Anti-explosion lock Warm-up time: 15-30 min. (180 °C) Homogeneity: < ± 3 °C at 180 °C Max: < ± 3 °C Maximum temperature: 230 °C Transport: optional Air circulation: Forced air Heaters: Interchangeable roof heating panels Airflow: Vertical Fan: Radially mounted on interchangeable panels Door: Double, two doors on two sides (through-feed oven) Divisible Motor power: 1.1 kW Capacity: 6480 L Warranty: 12 months GERMAN-SPEAKING CONTACT PERSONS IN GERMANY FEEL FREE TO INQUIRE Delivery time: approx. 12 to 16 weeks after order Shipping costs are calculated individually. We also offer systems tailored to your requirements. More information at Romer Germany Powder coating, electrostatic painting, Powder Coating, Powder painting, plastic powder, Peinture en poudre, thermoplastic, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування, powder coating booth Dedpfx Aecutrleqvocp powder coating system powder coating plant powder coating booth for powder coating surface technology powder gun powder guns curing oven powder coating oven industrial oven INDUSTRIAL OVEN, forced-air curing oven, powder coating oven

Year of construction: 2020, condition: new, ROMER® is the largest producer of powder paint shops in Poland, and one of the largest in Europe. ROMER® is over 10,000 manufactured devices operating in over 45 countries around the world. ROMER® Produces single technological equipment for powder paint shops as well as complete fully automatic turnkey paint shops. Dcsdpfx Aqsfzq Rysvjp ROMER® provides heating solutions for the aero and automotive industries for the largest concerns in the world. We provide warranty and post-warranty service of the devices we sell with a full range of spare parts.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Djdpfxoflpmqe Aqvjcp • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2024, condition: new, functionality: fully functional, Model: MAS-30-2 Dcedocubgpjpfx Aqvep Working dimensions (W x H x D): 1200 x 1800 x 300 Drive: Electric Rated power: 21 kW Rated voltage: 380 V Frequency: 50-60 Hz Number of nozzles: 250 pcs Pump: 1200 L/min Mixing of cleaning agents not possible – separate nozzles Nozzle type: Chemically neutral Operating temperature: 20 - 60°C Number of cleaning cycles: 2 Filling volume: ~1200 L Filtration: Yes Manufacturer's warranty: 12 months

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Dcjdpofz I N Tjfx Aqvep In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Dcjdpfxofz Aw Hs Aqvjp Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, The ROMER company is also involved in the production of suspended transport systems. Cross traverses (Cross transports) are designed and manufactured for specific installations Djdpfx Aofz Difjqvocp Oghxp Examples of equipment are presented below: Transport systems Depending on the customer's requirements, the transport systems can move on the floor or be hung on poles. - For comfortable solutions for manual installations, we recommend suspended crossbeams (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have, for example, several cabins with different colors, flexible solutions are used with the use of a power-and-free conveyor. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Djdsfz Dmfspfx Aqvecp Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Dcodpsfz U Hvefx Aqvjp Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning. Dcodpsfzkqmofx Aqvop

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Dsdpfefz Dvvox Aqvjcp • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 Dcedpfx Asyfim Ajqvjp 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Dsdpfx Aqsyfik Ievjcp Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Dcedpjfx Nfmjfx Aqvep 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Dcsdsfy T Spepfx Aqvjp Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡