Used Romania for sale (223)

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Isdeip Utajpfx Aacebc Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions Ibodpfx Ajr Dufbsacsc • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), functionality: fully functional, Stainless steel high conveyor vertical side with deep feed hopper and exit hopper, brand Franz Tölke; impeccable technical and optical condition; conveyor belt with scrapers in perfect condition, power supply 380 V, 50 Hz, Flender Himmel Z30-LK2 with speed reducer gearmotor, power 0,37 kW, 1,370 RPM, nmin = 21,6 1/min, T2 min= 22 Nm, T2max =11,5 Nm. Total height 2,370 mm, wight = 500 mm, length = 1,850 mm Sales price: 2.500 Euro + VAT, negotiable, FCA Oradea, Romania Ibjdpfx Aotgxrisacec Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; Isdpsucl Dcjfx Aacebc 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Ibjdpfxeucnzws Aacjc Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 05/4368/01, Used, refurbished automatic bread slicer machine make: JAC, model EEL 450/11, MFG : 2001, Thanks to its small dimensions, it can be placed anywhere. Slicing knives made of stainless steel. It processes 600-800 pieces per day. Suitable for bakeries, food stores, convenience stores. Easy to use, very quiet operation. Precise cutting of bread into 10-11 mm slices. Operational safety, rolling, manual start. maximum bread height: 150 mm, maximum bread width: 420 mm, supply: 230V – 50 Hz, 1 Ph + T, power 0,49 kW, frequency : 490 W, dimensions. : ± L =62 cm x W= 75 cm x H = 110 cm, weight: 155 Kg, made in Belgium Sales price: 1.390 Euro + VAT, FCA Oradea, Romania Iedpfx Aaorck Tvjcsbc Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: 2200268., We sell an automatic packaging machine (stretch film packaging machine, tray packaging machine ), ULMA model COMPACT, MFG 1999, SN: 2200268. Packaging for trays with stretch film including Bizerba scale type: 18-A (max 3/6 kg, min 20 gr) and Bizerba labeller GH both with serial number: 1713392 Ulma data: electrical power 1.2kw, 400V voltage, frequency 50/60 Hz and consumption of 5A. Technical characteristics: Reduced space required. Fully automatic operation. Iedpfx Aasuiq Dbscobc Semi-automatic coil change. Packaging with PVC, Polyethylene and Polyolefin films. Anticorrosive construction. High wrapping quality with minimum film consumption. Wrapping of products without tray. Approved according to E.C. regulations. packaging machinery. It is the ideal choice for the different food sections of small and medium-sized points of sale where, integrated with manual weighing and labelling systems, a significant speed and production rate are required, while maintaining small dimensions and ease of use. IMPORTANT: The machine is sold in a non-functional state, with no knowledge of the eventual error. The buyer should repair it or use it as a spare parts donor. Price Euro 1,900 Euro + VAT, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz Isdpfouiq Dhox Aacebc 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2003, condition: excellent (used), machine/vehicle number: 2131, Brand Hermann Waldner GmbH, stainless steel mixing vessel, for perfume, shaving cream and other liquids. type: Eurocont ATW; MFG: 2003; serial number: 2131; Ijdpetgthzefx Aacobc Total dimension L 1300mm x W 1500mm x1600mm; CE Marking: YES; material: stainless steel; Capacity: 100 liters; pressure: 1 bar; type of attachment: domed; type of head: cone; type of tank: Vertical; Power: 0.55 kW; Inner diameter: 500 mm; frequency: 50/60 Hz; permissible operating temperature: 130°C; test pressure: 1.43 bar; electric connection: 400 V; vessel own weight: 100 kg; dismantled and delivered without flow meters from the picture; Sales price: 2.750 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2002, condition: good (used), machine/vehicle number: 90996-1, Pizza electric oven Brand: Moretti Forni Rialto, type RHC / 18 CZ Year of manufacture: 2002 Serial number: 90996-1 Pizza oven frame support on rollers. The oven has 3 chamotte Thermal insulation electric oven 1 pizza room of 12 pizza Ø 30 Fibreglass insulation Viewing windows emergency stop Digital display Digital temperature display Digital control unit Heat resistant materials Athermal door handles Baking surface made of special cotton wool under the effect of heat Adjustable temperature Temperature: 400 ° C constant temperature (even with frequent opening) connection Power: 9.3 kW Electrical connection: 3 / N / PE 400 volts / 50 Hz Size: Oven external dimensions: L x W x H: mm 1600x1350x650 Oven interior dimensions: L x W x H: mm 1300x950x180 Dimensions of the structure on rollers: L x W x H: mm 1600x1150x900 Total external dimensions: L x W x H: mm 1600x1350x1550 Price: 1,600 Euro + VAT, negotiable, FCA Oradea, Jud. Bihor, Romania A separate guarantee is provided upon request, for a fee. We reserve the right to make mistakes, modifications and prior sale. You can make us a firm offer if you are interested in this pizza oven. We sell this labeller “as it is”. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Ibsdpfeg H Tlzex Aacsc Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2012, operating hours: 25,897 h, condition: refurbished (used), Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm Ibedpfx Aajg H Tmbjcsc Max. roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CN6-15000384, We sell a used Mindray Doppler ultrasound, type DC-60, MFG: 05/2021, serial no.: CN6-15000384, weight 85 kg, Device specifications: Color Doppler ultrasound unit with 21.5’’ FULL HD LED monitor i 13.3’’ LED touch screen 4 transducer ports, HDD 320GB, USB ports, DVD-RW Specifications: PW Doppler, Color Doppler, DirPower Doppler, THI, PSHI, iClearTM, iBeamTM, iTouchTM, Echoboost, FCI, HR Flow, iStorage, WiFi, MedSight, MedTouch Optional: CW, 3D/4D, Free Xros, iPageTM, SCV, STIC, CMPR, Color3D, iLiveTM, Stress Echo, TDI... This equipment has 3 transducers: The Mindray SP5-1N Phased Array transducer has a frequency range of 1.0 MHz. - 5.0 MHz. and supports the following applications: Form Factor: Phased Array; Applications: Cardiac; Frequency Range: 1.0 - 5.0 MHz; Compatibility: Consona N-Series The Mindray L13-3 Linear Array transducer has a frequency range of 3.0 MHz. - 14.0 MHz. and supports the following applications: Small Parts, Vascular, Musculoskeletal, Pediatrics. Form Factor: Linear Array; Applications: Small Parts, Vascular, Musculoskeletal, Pediatrics; Frequency Range: 3.0 MHz. - 14.0 MHz. Compatibility: Mindray DC-4 The Mindray C5-1s Curved Array transducer has a frequency range of 1.0 MHz. - 5.0 MHz. and supports the following applications: Abdominal, Pediatrics, Obstetrics, Gynaecology. Form Factor: Curved Array; Applications: Abdominal, Pediatrics, Obstetrics, Gynaecology; Frequency Range: 1.0 - 5.0 MHz.; Compatibility: Mindray M9 Mindray’s brand-new solution is an excellent fusion of continuous customer insights into clinical needs, combined with continually evolving cutting-edge ultrasound technologies. Full of vitality, with the goal of insight into the future and pursuit of the infinity, it is constantly improving with increased scalability. Isdpfx Aaol E H Unecjbc As an all-around partner, DC-60 Exp with X-Insight devotes to provide a comprehensive solution to help you manage all-aspect daily clinical practice with ease and certainty. Based on the deep insights of customer needs, the DC-60 Exp with X-Insight is designed to deliver high efficiency with precision imaging, which is empowered by eXpress Clarity, eXceptional Intelligence and eXceeding Experience. Price: 19.900 Euro + VAT, FCA Bucharest/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2005, condition: good (used), ID: ALX01 Transmiter with antenna AUTEC, used, type R202, 48V, model 1.52B, year 2005, serial G14652; Radio Remote Control AUTEC used, type TAO2 model D07B, radio module E16STXEU2, frequency range 869.700-8700 MHz, RF output power < 5mW ERP, POWER SUPPLY 7,2, protection degree IP65. This transmitter is suitable for JASO Cranes but also other type of cranes. AUTEC battery charger used, FW260 R, type B, IP30 Isdpfxji Dt Sce Aacsbc Input 230V- 50/60Hz 6W Output 8,5 V – 260 mA 2 pcs. Battery model NC07071, NiCd, 7,2 V – 0,7 Ah Price: 2.000 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: repair required (used), AGET FT 40-D1-SP filter exhaust unit We have 2 identical units AGET DUSTKOP After-Filters improve air quality and provide a safer working environment by removing fine dust particles from the exhaust airstream. They are generally used to filter dust not removed by a cyclone, yielding breathable, clean air that can be recirculated back into the work area, where allowed. • High efficiency woven fabric filter material Ibodpfxeg Tivpj Aacoc • Standard 5” diameter cotton sateen filter tubes with positive sealing snap-ring cuff • Standard shaker mechanism (manual or motorized) • Component bolt-together design and construction • Supporting structural steel unit frame on open units • Sheet metal uni-body construction on enclosed units • Weather-resistant powder-coated finish • Heavy duty industrial grade construction • Standard 3-year warranty on filter tubes with the purchased unit and completed application review Capacity range: 300 – 7000 CFM (CFM dictated by dust) Common applications: Woodworking, metalworking, plastics, pharmaceuticals, powdered chemicals, and food processing Woven fabric filters material yields extremely high filtration efficiency, and is intermittently reconditioned by the integral shaker mechanism, operated either manually or automatically. Collected dust is deposited into a dust storage container, selected to meet specific application requirements. • Standard dust bin • Dust bin drawer(s) • One 55 gallon drum– 7.3 cu. ft. Price Euro 2.000 +VAT for both units, negotiable Delivery condition, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), functionality: fully functional, input voltage: 380 V, year of last overhaul: 2023, input frequency: 50 Hz, empty load weight: 960 kg, type of input current: three-phase, power: 1.15 kW (1.56 HP), Mixer with fixed stainless steel bowl, NN, older model, made in Italy, bowl capacity of up to 200 kg dough, maximum flour capacity of the bowl: 125 kg; maximum power through 1 ALFA MEC 100 motor of 700 rotations per minute, power 1.1 kW, 380V power supply but can also be adapted to 220 V (from the motor); ideal for pizza and bread dough, operation with relatively low noise, 2 speed levels, bowl operation in 2 possible directions, operating time adjustable on the main working direction with the help of a (functional) timer, functional emergency stop, metal frame /chassis cast, extremely stable, stainless steel safety cover, the cover is easy to open and close, the device stops after opening the safety cover (travel limiter), electrical connection: 3N/PE / N / PE 400V / 50 Hz The mixer is produced according to the hygiene and safety regulations in force. The machine complies with European food standards. Benefits simple operation, easy to clean, very resistant and durable, despite its age, it has little electronics and the mechanical part is robust, it can have a very long life. External dimensions W x H x H: mm x mm x mm NOTE: the machine has been overhauled on the electrical and mechanical side. Sales price: 2.350 Euro + VAT, negotiable, FCA Oradea, Romania Ijdpfx Aajra Ntrjcobc Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 118594, stainless steel tank, brand Stöckling Logistik, year of manufacture 2002, impeccable technical and optical condition, gaskets in excellent condition, Series: 118594, weight 102 kg, operating pressure allowed: +1 bar/-0.15 bar; tested pressure +1.4 bar; maximum operating temperature allowed + 120°C/-10°C. This stainless steel tank for various food and non-food liquids. volume 540 liters, diameter 1,000 mm, height 1,270 mm.. It has 1 big upper loading socket with valve, lower DN 100 discharge/empty socket with closing lever and threaded cap. Ibedpfjtguviex Aacoc Sales price: 1.700 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2007, condition: excellent (used), Used Bitzer 4TCS-8.2Y-40P/sn 1672508990, semi-hermetic reciprocating compressor on Freon. Scroll compressor ESH736Y-40S/sn 1072500425, 2 vertical receivers Bitzer FS 152/sn 1172402177 and Bitzer FS 302/sn 1172601712 The system is complete with an oil separator, oil tank and pressure and safety switches/gauges. Year of manufacture 2007. Nominal Pressure 19 bar Output (m3 /hour) 41.33 m³/h Ibodeir E Dnepfx Aacjc Engine power 20.6 kW Volts 400 V Frequency 50 Hz Sound level 74.5 dB(A) Weight 134 kg Condition goo Cooling capacity 21.6 kW Refrigerant R404A Number of cylinders x Diameter x Piston head 4 x 60 mm x 42 mm Intake line 35 mm - 1 3/8" Delivery line 28 mm - 1 1/8" according to the productivity according to the EN12900 standard ▼ tc ► to 5°C 0°C -5°C -10°C -15°C -20°C -25°C -30°C 40°C Q [W] — — 27759 22788 18477 14755 11559 8831 P [kW] 9,86 9,05 8,2 7,34 6,46 5,57 I [A] 16,69 15,43 14,14 12,83 11,52 10,22 45°C Q [W] — — — 20560 16622 13219 10294 7796 P [kW] 9,41 8,47 7,52 6,57 5,6 I [A] 15,99 14,54 13,1 11,67 10,26 50°C Q [W] — — — 18347 14792 11714 9065 6801 P [kW] 9,74 8,71 7,68 6,65 5,61 I [A] 16,5 14,91 13,34 11,8 10,28 Conventions • tc - condensation temperature • to — evaporation temperature • Q [W] - cooling capacity (R404a) • P [kW] - power consumption • I [A] - current Price Euro 2.250 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2001, input voltage: 380 V, Used mixer with fixed stainless steel bowl, DALMAR 50, MFG 2001, made in Hungary, serial No. 01D045 bowl capacity of up to 50 kg dough, maximum power 2.2 kW, ideal for pizza and bread dough, operation with relatively low noise, bowl operation in 2 possible directions, operating time adjustable on the main working direction with the help of a timer, the timer is not running, metal frame /chassis cast, extremely stable, stainless steel safety cover, the cover is easy to open and close, the device stops after opening the safety cover (travel limiter), electrical connection: 3N/PE / N / PE 400V / 50 Hz Ibsdpfxsrb Dhqo Aacoc The mixer is produced according to the hygiene and safety regulations in force. The machine complies with European food standards. Benefits simple operation, easy to clean, very resistant and durable, despite its age, it has little electronics and the mechanical part is robust, it can have a very long life. External dimensions W x H x H: mm x mm x mm NOTE: the machine has been overhauled on the electrical and mechanical side. Sales price: 1.560 Euro + VAT, negotiable, FCA Oradea, Romania

Year of construction: 2012, condition: refurbished (used), machine/vehicle number: 25797, Automatic labeller Brand: Wilux, Type: PAS2202 / Label set II-A6310-RH-P Year of manufacture: 2012 Serial number: 25797 Maximum width of the roller: 80 mm Electrical connection: 230 V Own weight 80 kg Total size: L = 1000 mm x l = 800 mm x H = 1900 mm The machine has been tested and runs perfectly. Requires synchronization on the workflow with a transfer table/band and a bandwidth sensor. The labeller has a technical book and electrical drawings. For Romanian companies, there is the possibility of selling in instalments with a 50% advance. Price: 2900 Euro + VAT, negotiable, FCA Oradea, Jud. Bihor, Romania A separate guarantee is provided upon request, for a fee. Iodpfxjg H Tl Ts Aacjbc You can make us a firm offer if you are interested in this automatic labeller. We sell this labeller “as it is”. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2002, condition: repair required (used), ULMA, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out the tray. • Gravity and motorized exit conveyors: inline, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centring device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high-performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethene and polyolefines. TECHNICAL FEATURES (Depend on the model) • 1 or 2 film rolls with automatic roll selection. • Automatic recognition of the tray dimensions or manual. • Automatic or manual selection of film length and width. • Universal elevator. • Self-diagnostic capability. • Film tension control. • Forward and reserve jog capability. • 4-way film stretch with lateral pre-stretch. • Temperature control for the sealing belt. • Oversize package detector. • Mechanical torque limiter. • Guards and safety devices according to international standards. • Heavy duty construction with corrosion-resistant material. Ibsdpfxeg H Tque Aacsc Power supply: 380 V, 12 kW Bizerba GV labeller, manufactured in 2002 Bizerba 18A scale with Bizerba AB display. Automatic labelling and weighing system for products packaged in the food area. Electric power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Compressed air supply of the blower label: air pressure: 6 bar, air flow: min. 100 l / min, compressed air. without oil, filtered at 10 µm, Label dimensions: 100x100. The separation between labels: from 2 to 20 mm. Thermal print head - resolution of 8.0 points Weighing from 1gr to 6000gr. Maximum labelling capacity 60 packages/minute. Equipment prepared for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment was reviewed, rebuilt, and guaranteed with the following maintenance: change of conveyor belts, thermal print head, and engine belts. High-quality equipment and great performance in terms of speed and reliability. The label and the scale are mounted on an output conveyor belt. Weighs at least 40 g up to a maximum of 18 kg For the Romanian companies, there is the possibility of selling in instalments. Price upon request, FCA: Oradea/Romania We sell this line refurbished Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2007, condition: excellent (used), Evaporator GOEDHART, type VRZ 126310-GFP - 2 identical pcs. in stock. PJV071924-01 and PJV071924-02 Qo=39.3kW, Vo.x=25750 m3/h, F=262m2, 2 fans with diameter 630mm, s=10mm, dimensions of the cooler: LxBxH: 286 х 126 х 111 cm; Coolant (NH3) Very good condition Price Euro 1800 Euro + VAT per piece, negotiable, ExWorks: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Ibedpfx Aoip Ungoacoc

Year of construction: 2013, condition: like new (used), we sale 3 fire dampers for the isolation of duct penetrations between fire compartments: 1. TROX Technik FKR-01/02-90K, 510x600, year of manufacture 2013. 2. TROX Technik FKR-01/02-90K, 630x600/Z42, year of manufacture 2013. 3. SCHMIDLIN K90, 310x700, year of manufacture 2003 sale in current condition as seen. All are dismantled properly Iodpfog Rpibsx Aacobc FCA Oradea, Romania

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Ibodpfjhgfnbex Aacoc Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: W20-0648-01, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dustmaster 1200 The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding ƒ cutting / routing ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy duty Polyester needle felt (PNF) with Teflon coating, envelope type filter design ƒ High efficiency, M class. Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Iedpsvccc Iefx Aacjbc Disposable bags can be used to line the container For the Romanian companies, there is the possibility of finance leasing in instalments with a minimum of 40-50% down payment. Price - Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2012, condition: like new (used), machine/vehicle number: 31111455, Thermostatic water dispenser-mixer, used, make STM, model DOMIX 45, year of manufacture 2012, serial number: 31111455, Complete and intuitive interface with a digital membrane keyboard to easily set and recall the recipes in memory and 3 digital displays to read the water quantity, the set temperature and the temperature by the high-precision external probe. A reference scale makes it easy to find the right temperature. Max tolerances of ±1% in dosing and ±1°C in temperature. A bypass system discards the water not in temperature, manually in the DOMIX 45. To program 80 simple deliveries, of which one is free, ie without control of the quantity (useful if the litre counter were damaged). Durable stainless steel structure. Kit for the 3 water inlets Option to manage the season change. Installation kit and 2,5 m delivery hose in food-grade plastic with stainless steel terminals Temperature precision ±1,0°C (±1,8°F) By-Pass manual Dosing precision ±1% User interface Alphanumeric keyboard with 3 7-segment displays, signal lights and shortcut keys Recipes in memory 80 recipes Inlet connections 2 x 1/2” + Optional manual 3-way kit Flowrate at 1 bar and 20°C 18 L/min (40 lb/min) Flowrate at 5 bar and 20°C 40 L/min (88 lb/min) Max delivery 999,9 L; 999 lb + 15 oz; 999,9 lb Outlet connections 16 mm Regulation range 1 ÷ 60°C (34 ÷ 140°F) Max inlet water temperature 65°C (150°F) Max/min inlet pressure 5 bar (72,5 psi) / 1 bar (14,5 psi) External Temp probe Thermo-resistance PT1000 Class A Internal Temp probe Thermo-resistance PT1000 Class A Remote pump command Yes Communication options RS 485, Inputs for remote START/STOP Casing material Stainless steel AISI 304 Power supply 208/240V AC – 110/127V AC Ibodpfx Aaeirmw Djcsc Max absorbed power 25 VA Price Euro 1.600 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana