Used Setup for sale (852)

Condition: used, functionality: fully functional, Complete cooling installation for 600 m² cooling area / 2400 m³ Fully operational. 5x Bitzer 6G-30.2 3x Danfoss VLT5042 6x Searle km175-6 AL 9x Searle DSR68-3 AL Crjdpext Ek Esfx Afiei 1x Searle DSR 116-3 AL 1x Searle MDR90-6, 3-fan (roof-mounted) 2x Searle, 2-fan units (roof-mounted) 2x Minimep EIREHA monitoring systems 1x Dynaco D313 LF (1740 x 2750) 2x Dynaco D313 LF (2400 x 2750) 2x Isocab electric doors (2400 x 2750) 2x Isocab doors (1740 x 2750)

Condition: used, mileage: 324,000 km, Year of construction: 2017, Serial number: YS2R6X4000213xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21676 Specifications: EU-approved until 31.03.2026 2017 model Approx. 324,000 km Opticruise gearbox All-steel suspension Tires (see photos) Retarder Comes with snow plow equipment Euro 6 Length: 748 cm Width: 255 cm Wheelbase: 335/135 cm Curb weight: 13,870 kg 6x4 drive 581 hp Extra lights Air horns Trailer hitch Beacon bar Toolbox Tipper body (see photos) Sleeper cab Refrigerator Radio/CD Air conditioning (A/C) Description:Scania R580 tandem tipper truck from 2017.Snow plow equipment has been removed but is included in the sale.The truck has previously been on a gold maintenance contract and is EU-approved until March 2026.Ready for delivery at short notice. Crsdpfsxraafjx Afiei Km: 324000 HK: 580 Technical approved: Yes EU-approved until: 31.03.2026 Own weight: 13870 Total Weight: 30000 Payload: 16055 Width: 255 Length: 748 Euro: 6 Model: R580 6x4 Brøyterigget Tippbil Gearbox: Automatic

Year of construction: 2017, condition: used, Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 Codsflk Hpepfx Afieri -Dimensions: 400/400/H810 mm -Weight: 232 kg

Condition: good (used), Schlebach Folding Machine / Standing Seam Machine FK1 Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: I would like to point out that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions beforehand to avoid uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to errors in the description and prior sale. Credpfx Afsw Rcpujiei VAT is shown separately on my invoices. Shipping via freight carrier.

Condition: used, mileage: 280,000 km, Year of construction: 2018, Serial number: WMA26XZZ6JM77xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21654 Specifications: EU approved until 08.06.2026 Model year: 2018 Mileage: approx. 280,000 km (increasing) Automatic gearbox Tires (see photos) Retarder Snowplow ready Euro 6 Length: 744 cm Width: 255 cm Wheelbase: 330 cm Curb weight: 13,800 kg 6x4 drive 581 hp Reversing camera Tow hitch Toolbox Sørling tipper body Rotating beacon bar Extra driving lights Bed Radio/CD Climate control / AC Cjdpfx Aexq Dinofijri Description:MAN TGX 26.580 tandem tipper truck from 2018.The truck is snowplow-equipped and fitted with a Sørling tipper body.Has been under MAN service contract until 2024.Available for quick delivery.See video! Km: 280000 HK: 580 Technical approved: Yes EU-approved until: 08.06.2026 Own weight: 13800 Total Weight: 28000 Payload: 14125 Width: 255 Length: 744.5 Euro: 6 Model: TGX 26.580 6x4 Brøyterigget tippbil SE VIDEO Gearbox: Automatic

Condition: good (used), Schlebach folding machine / installation machine AK2 Good condition, fully operational, can be inspected and tested on site. Credpfxow Rcn De Afisi Shipping available internationally. Inspection: Please note that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to buying to prevent any ambiguities. For general inquiries or to arrange an inspection appointment, I can be reached at the phone number provided below or above at any time. Descriptions are subject to change and prior sale is reserved. VAT is shown separately on my invoices. Shipping will be handled by a freight forwarder.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 425004330, working width: 500 mm, type of input current: three-phase, overall weight: 1,300 kg, total height: 1,600 mm, total length: 3,300 mm, total width: 2,300 mm, Fully automatic binding line with a capacity of up to 2,100 cycles per hour! TECHNICAL DETAILS Mechanical cycles per hour: 2,100 Pitch: 3:1, 2:1 Binding thickness: 15 mm Binding element: 5.5 - 19 mm Min. binding width: 70 mm Max. binding width: 500 mm Min. unbound edge: 135 mm Max. unbound edge: 700 mm Binding process: Automatic Time required for diameter change: 20 min Format change without diameter change: 3 min MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 2,300 x 1,600 mm Machine weight: 1,300 kg Power requirements: 3/N/PE~400/230V 50Hz / 3.5 kW 3/PE~200/115V 60Hz / 3.5 kW Crsdpfx Afoxrb Uqsioi EQUIPMENT Touchscreen-assisted setup process Simple and fast automatic machine setup via display Easy product loading Closure tools (5/16, 9/16, 5/8, 7/16, 3/8 inch) Calendar hangers

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL SPECIFICATIONS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 - 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Setup mode speed X, Y, Z: 1 - 2,000 mm/min Table width: 550 mm Table length: 900 mm Table load: 800 kg Max. setup height: 600 mm Distance spindle nose to table: 150 - 650 mm Max. spindle speed: 8,000 rpm Tool magazine positions: 40 Holder diameter: 40 mm Tool holder: SK 40 Max. tool diameter for standard tools: 80 mm Max. tool diameter for special tools with free adjacent slots: 140 mm Max. tool diameter for boring heads with free adjacent slots: 200 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Credpfx Aexm Ty Ijfiei Documentation/manual Chip conveyor Note: The magnetic clamping plate shown on the table is not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,590 h, functionality: fully functional, spindle motor power: 15,000 W, turning length: 100 mm, turning diameter over cross slide: 51 mm, spindle speed (max.): 5,000 rpm, turning diameter: 51 mm, spindle bore: 51 mm, overall weight: 5,300 kg, rotational speed (max.): 5,000 rpm, type of input current: three-phase, bar passage: 51 mm, feed length X-axis: 165 mm, feed length Y-axis: 80 mm, feed length Z-axis: 590 mm, total width: 1,560 mm, total length: 2,840 mm, total height: 1,700 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 20 m/min, bar diameter (max.): 51 mm, turning diameter over bed slide: 51 mm, turning diameter over top slide: 51 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, input voltage: 400 V, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 590 mm, power of the servo motor: 15,000 W, Equipment: documentation/manual, rotational speed infinitely variable, 2018 Citizen Miyano BNJ-51 CNC Automatic Lathe – Excellent Condition & Low Hours 2018 Citizen Miyano BNJ-51 Fixed Headstock CNC Automatic Lathe, complete with Iemca Kid 80 Barfeed and full tooling package. This high-precision twin-spindle lathe has only 3,590 cutting hours and comes from a clean, well-maintained production environment. Perfect for precision component manufacturing in medical, aerospace, and automotive industries. Machine Overview Make/Model: Citizen Miyano BNJ-51 Machine Type: Fixed Headstock Type CNC Automatic Lathe Year: 2018 Control System: Fanuc Series Oi-TF Cutting Hours: 3,590 hrs Condition: Excellent – low hours, production-ready Included Equipment & Features Iemca Kid 80 Barfeed Parts Conveyor Swarf Conveyor Parts Catcher Mirror Turning Capability Collet Chuck on Spindle 1 Collet Chuck on Spindle 2 6” 3-Jaw Hydraulic Chuck 8 x Driven Toolholders Full Set of Static Toolholders Technical Specifications Machining Capacities Max. Machining Length: 100 mm Standard Turning Diameter (Spindle 1): 51 mm Standard Turning Diameter (Spindle 2): 42 mm Chuck Size Spindle 1: 6" Chuck Size Spindle 2: 5" Number of Spindles: 2 Spindle Performance Spindle 1 Speed Range: 5,000 rpm Spindle 2 Speed Range: 5,000 rpm Draw Tube ID (Spindle 1): 52 mm Draw Tube ID (Spindle 2): 43 mm Spindle 1 Drive Motor: 15 kW Spindle 2 Drive Motor: 7.5 kW Turrets & Tooling Number of Turrets: 2 Turret 1: 12-Station (Driven Tool Capable) Turret 2: 8-Station (Driven Tool Capable) Square Tool Shank: 20 mm Drill Shank Diameter: 25 mm Driven Tool Speed – Turret 1: 6,000 rpm Driven Tool Speed – Turret 2: 3,000 rpm Driven Tool Motor (T1): 2.2 kW Driven Tool Motor (T2): 0.75 kW Axis Travels X1 Travel: 165 mm Z1 Travel: 246 mm Y1 Travel: 80 mm (+/- 40 mm) X2 Travel: 85 mm Z2 Travel: 590 mm Rapid Feeds (X1, Z1, X2, Z2): 20 m/min Rapid Feeds (Y1): 12 m/min Credpfsxtfqrsx Afiei Power & Electrical Power Capacity: 33 kVA Machine Dimensions (W x D x H): 2840 x 1560 x 1700 mm Machine Weight: 5,300 kg Highlights Low Cutting Hours: Only 3,590 hrs of light use Full Barfeed & Chip Handling Package – ready for continuous production Twin Spindle / Twin Turret Configuration for maximum productivity Driven Tooling for milling, drilling, and complex part geometry Fanuc Oi-TF Control – industry standard reliability and precision Ideal for precision turned parts in small to medium batch runs Applications This machine is ideal for medical components, automotive fittings, aerospace connectors, hydraulic parts, and general precision turned parts. The combination of twin turrets, high-speed spindles, and driven tooling allows for efficient multi-axis machining with minimal setup time and high repeat accuracy. Condition & Availability The Citizen Miyano BNJ-51 is in excellent mechanical and cosmetic condition and available for immediate inspection or delivery. Citizen Miyano BNJ-51, Used Citizen CNC Lathe, Used Miyano Lathe Ireland, CNC Automatic Lathe for Sale, Citizen BNJ Lathe, Twin Spindle CNC Turning Center, Used CNC Machines Ireland, Fanuc CNC Lathe, Barfeed CNC Lathe, Used Precision Lathes, Citizen Miyano BNJ Series, CNC Turning Machines for Sale Europe, Fixed Headstock CNC Lathe

Condition: used, This listing is for the Cole Palmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Crodpexuqh Esfx Afisi Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Condition: refurbished (used), Overview The Duplo DC616 Pro multifunction finisher is a compact, all-in-one system that combines slitting, cutting, creasing, and perforating in a single pass. Ideal for digital print shops, in-plants, and commercial printers, the DC616 eliminates white borders and prevents toner cracking, producing professional-quality output with ease. This machine is perfect for finishing business cards, postcards, brochures, greeting cards, tickets, and more. With barcode recognition, automated setup, and job recall, it delivers consistent accuracy, reduces waste, and speeds up turnaround times. Key Features of the Duplo DC616 Pro Four-in-one finishing: slit, cut, crease, and perforate in one pass. Ideal for full-bleed digital applications such as business cards, postcards, tickets, and brochures. 21-up or 25-up business cards in one run. Adjustable 3-step creasing depth – up to 20 creases per sheet to prevent toner cracking. Barcode scanning & registration marks for precision alignment and drift compensation. Easy-to-use touchscreen control panel with up to 80 job memories. Pro software wizard included – unlimited job storage and quick template creation. PDF template library for common jobs (business cards, postcards, greeting cards). Complete System Includes Duplo DC616 Pro finisher – refurbished and in excellent condition. Integrated touchscreen PC with Pro software wizard. Camera system for barcode and registration mark reading. Large capacity waste bin and neatly stacked finished output tray. Why Choose the Duplo DC616? Versatility – replaces multiple standalone machines with one compact solution. Accuracy – automatic drift compensation ensures perfect finishing. Ease of operation – intuitive software, templates, and job storage for faster changeovers. Csdpfx Afsxr Du Hoisri Productivity – designed for today’s fast-paced digital print environment. Compact design – saves floor space while delivering professional results. Specifications Manufacturer Duplo Model DC616 Pro Margin Slitters 6 Slitters. 2 side trim, 4 x center (programmable in 0.1mm increments) Cross Knife Cutter Max of 25 cuts per sheet. Ledge edge cut 3.2mm minimum, gutter cut 3mm minimum. Trail edge 5mm minimum Perforation Unit 300gsm max paper weight. 2 rotary perf tools. Positioning is manual. Barcode and image reader Included Input paper size max 320mm x 650mm (330.5 x 999mm with extension) Input paper size min 210mm x 210mm Minimum paper weight 110gsm Maximum paper weight 350+gsm Paper curl Within +/- 3 mm Paper type Uncoated paper, coated paper, laminated paper Feeder capacity 100 mm Feed system Top feed / Belt suction Power supply 230V 50Hz Weight 150 Kg Dimensions (l x w x h) 1600mm x 620mm x 1050mm

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Credpfoxlknmjx Afiei Refurbished in 2021 Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. Crsdefnldqjpfx Afiji The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc..

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) Cedpfx Afsxrf Stjijri • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: excellent (used), Year of construction: 2016, operating hours: 23,163 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 2 m/min, torque: 118 Nm, controller manufacturer: Hurco, controller model: MAX5, total height: 3,298 mm, total length: 5,662 mm, total width: 3,921 mm, table width: 660 mm, table length: 1,676 mm, table load: 1,360 kg, rotary table diameter: 600 mm, rotational speed (max.): 100 rpm, overall weight: 10,900 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 622 mm, spindle motor power: 36,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 249 mm, tool diameter: 75 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 🔹 For Sale: 2016 Hurco VMX60SRTi 5-Axis CNC Machining Centre – Excellent Condition, Full Package 🔹 Make: Hurco Model: VMX60SRTi Year: 2016 Machine Type: 5-Axis CNC Machining Centre Cedouyt U Tjpfx Afijri Condition: Excellent Control System: Hurco WinMax with Touchscreen Location: Ireland 📌 Machine Overview: Available now is a Hurco VMX60SRTi 5-Axis CNC Machining Centre in excellent condition, fitted with high-performance features and Hurco’s flexible swivel-head + rotary table configuration. This 2016 model delivers outstanding part accessibility, powerful milling capability, and robust software for advanced 5-axis work. The large table space supports both full 5-axis and standard 3-axis machining, offering maximum operational flexibility for tooling, mold-making, aerospace, and general precision engineering. ✅ Key Features & Included Options: Touchscreen display with shaded 3D graphics (real-time) 2GB RAM | 120GB SSD | USB ports Ultimotion high-speed software (profiling & data smoothing) S-Curve Acceleration & Look-Ahead Finish Control Coolant Through Spindle (CTS) NC4 Laser Tool Probe Renishaw RMP60 Part Probe Software Add-ons: Mould Maker Suite (3D Swept Surface, Helical Entry, Rest Machining) DXF Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Networking/Remote Diagnostics) Conversational/NC Merge Swivel B Axis & C Axis Rotary Table Conversational or G-code Programming flexibility 🔧 Technical Specifications: Table Size: 1676 x 660 mm Rotary Table Diameter: 600 mm Max Load (Flat Table): 1360 kg Max Load (Rotary Table): 500 kg X Travel: 1524 mm Y Travel: 660 mm Z Travel: 610 mm B Axis Tilt: ±92° C Axis Rotation: 360° Spindle Nose to Table: 13–622 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Spindle Power: 36.5 kW Spindle Torque: 118 Nm - 2,900 rpm Tool Changer: 40 Tools Max Tool Diameter: 75 mm Max Tool Length: 249 mm Max Tool Weight: 7 kg Rapid Traverse Rates: X/Y: 32 m/min | Z: 24 m/min Rotary Table Speed: 100 rpm Power Requirement: 70 kVA Machine Dimensions (LxW): 5662 x 3921 mm Height: 3298 mm Machine Weight: 10,900 kg 📈 Ideal For: Aerospace & Defence Components Mould & Die Work Complex 3D Surface Milling Multi-Side Machining in One Setup High-Precision Part Manufacturing Hurco VMX60SRTi for Sale 5 Axis CNC Machining Centre Used Hurco CNC Machine Hurco 5 Axis CNC Ireland CNC Machining Centre with Rotary Table

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Crsdpsxqqyysfx Afisi Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Condition: excellent (used), Overview The Touchline CPC375 is a high-performance, multifunction finishing system capable of cutting, creasing, and perforating in both lengthways and crossways directions. Designed for digital printers, in-plants, and commercial finishing operations, the CPC375 delivers professional-quality output with minimal setup time. Its automated tool detection and patented changeover unit allow quick adjustments, enabling fast production of vouchers, tickets, coupons, reply cards, and other print products. With support for a wide range of paper stocks and automated operations via a touchscreen interface, the CPC375 combines speed, accuracy, and versatility in a single, compact system. Key Features of the Touchline CPC375 Multi-functional finishing: Cut, crease (positive & negative), and perforate (stop or continuous) in a single pass. Wide paper range: 80–400gsm for cutting/creasing; perforates up to 300gsm. Automated setup: Patented changeover unit allows quick, tool-free swaps; tools detected electronically, and working depth automatically adjusted via touchscreen. Flexible tooling: Dual tool module, cross knife, and lateral rotating longitudinal knives; stores up to three additional tools; up to four perforating heads for length of sheet perforation. High-speed operation: Up to 6,000 sheets per hour, with high-capacity feed load. Large sheet capacity: Maximum sheet size 370mm × 1200mm with table extension. Vacuum conveyor feeder: Supports offline or inline feeding from printers. Touchscreen control: Intuitive interface for easy job setup, adjustments, and monitoring. Complete System Includes Touchline CPC375 finisher with crease, perf and cut – refurbished and fully tested One optional start/stop perforation unit for length of sheet perforation Touchscreen interface for full control and automated adjustments Tool magazine with storage for multiple tools Vacuum conveyor for reliable sheet feeding Why Choose the Touchline CPC375? Versatility: Crease, perforate, and cut multiple paper stocks in one machine. Accuracy: Automatic tool detection and setup ensure precise finishing every time. Ease of operation: Touchscreen interface with quick setup reduces training and changeover time. Productivity: High-speed operation and large sheet capacity handle small and high-volume jobs with ease. Professional results: Produces high-quality output for tickets, vouchers, coupons, cards, and other printed materials. Specifications Manufacturer Multigraf Model Touchline CPC375 Condition Refurbished Stock Number 114963 Min sheet size 105mm x 148mm Max sheet size 370mm x 1200mm with extension Creasing paper weight 80gsm to 400gsm or 0.4mm Perforating paper weight 80gsm to 300gsm or 0.3mm Csdpfx Ajxrdp Dsfisri Cutting paper weight 80gsm to 400gsm or 0.4mm Feeder system Suction feed Control panel Touchscreen Double sheet detection Ultrasonic (standard) Max number of creases/perfs 20 per sheet Possible cuts Front 4-120mm. Centre 4-40mm. End 4-27mm Standard tooling 1 crease bar (2 crease widths), 1 cross perforation tool (11 tpi) Optional tooling Stop/Start rotary perforation. 1 unit included. Option to add 4 in total Electrical requirements 240v 50/60Hz

Condition: used, Year of construction: 2006, grinding diameter - cylindrical max. 650 mm grinding diameter - internal max. 600 mm control Siemens Sinumerik 840 D internal grinding depth max. 600 mm External grinding length max. 600 mm workpiece length - max. 380 mm turning speed range - stepless 1-795 U/min Workpiece spindle unit (U/B1/L adjustment): -Travel (U axis) 300 mm -Swivel angle (B1 axis) -1°/+12° -Speed range (infinitely variable) 1-795 rpm -Setup speed (tapping) 10 rpm Csdpfx Asw Rf Tvofisri -Spindle head size A 8 according to DIN 55026 -Through bore 58.5 mm -Workpiece diameter max. 830 mm -Workpiece length max. 600 mm -Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): -Travel (Z1 axis) 800 mm -Travel (X1 axis) 150 mm -Swivel angle (B2 axis) 270° -Drive power of internal grinding spindles (infinitely variable) 7.5 kW -Grinding block mounting bore (diameter) 100 mm -Grinding block mounting length (diameter) 100 mm -Grinding diameter max. 600 mm -Grinding depth max. 860 mm -Manual longitudinal adjustment of internal grinding axis on table 530 mm External and surface grinding device (Z2/X2): -Travel (Z2 axis) 800 mm -Travel (X2 axis) 470 mm -Drive power of external grinding spindles 5.5 kW -Mounting bore grinding block Ø 120 mm -Grinding diameter max. 650 mm -Grinding length max. 600 mm -Grinding wheel diameter max. 500 mm Equipment/accessories: -Various grinding spindles -Various flanges/grinding wheel holders -Various clamping jaws -Coolant system -Oil mist filter -Cooler -Technical documentation

Condition: ready for operation (used), Year of construction: 2002, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable 10.0 - 1.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 10.4 kW weight 5950 kg range L-W-H 4565 x 2950 x 2163 mm current list price ~ 150.000 Euro with excellent features (!!) Features: - CNC electromotive universal swing bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - Rotating upper beam / as an automatic tool changing system * With 2 tool stations (sharp and goosefoot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Control panel front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control panel, front right - Servo-inverter-controlled drives * For bending/upper jaw & electric backgauge Credsxr Rbajpfx Afiji - CNC electro-motorized lower jaw adjustment - CNC electro-motorized backgauge * Travel speed 300 mm/sec. * With rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions Optional accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool gouge rail - 2x bending rails

Condition: new, The KB 1400 is a high-performance Conventional Vertical Milling Machine within the Bed-Type Milling Machines group, designed by KNUTH for exceptional cutting capabilities. This heavy universal bed milling machine features wide guides and impressive drive power, making it ideal for plant and machine construction. Its vertical milling head, which can swivel ± 45°, along with a manually adjustable quill and infinitely variable spindle speed, provides versatility and precision for diverse machining tasks. The machine's robust gearbox allows for adjustable feeds in the Y- and X-axes, ensuring rapid traverse on all axes. With a table setup area of 1,400 x 400 mm and a travel distance of 950 mm, this machine can accommodate large workpieces and various clamping devices. The KB 1400 also boasts a solid Meehanite cast-iron frame, contributing to improved stability and reduced vibration, resulting in higher accuracy and productivity. Benefit from its extensive standard equipment including a 3-axis position indicator and coolant system. Experience the precision and robust performance of the KB 1400 – request a quote today to explore how this Conventional Vertical Milling Machine can enhance your operations. Csdpswubzlefx Afijri

Condition: excellent (used), Duplo 150 Digital Booklet System Location: Glendale, UK Availability: In stock Condition: Refurbished by trained engineers – Excellent condition, perfect working order. Overview The Duplo 150 Digital Booklet System is a compact, modular solution designed for low to mid-volume digital print finishing. This complete configuration includes the DSF-2200 Sheet Feeder, DBM-150 Booklet Maker, and DBM-150 Trimmer, delivering high-quality booklets with speed and reliability. Producing finished sizes from A6 up to A4, as well as custom sizes between 320 × 460 mm and 120 × 210 mm, it offers flexibility and professional results in a space-saving footprint. Capable of producing up to 2,400 books per hour, it is the perfect near-line solution for today’s digital printer. Key Features Produce booklets from A6 to A4, plus custom sizes. Handles up to 25 sheets (100 pages) per booklet. User-friendly PC controller with job recall and automatic set-up. Two feed trays for combining different media types. Job integrity assurance for accurate, error-free production. Fast operation with up to 2,400 books per hour. Complete System Includes DSF-2200 Sheet Feeder – High-capacity dual tray feeder with five different feed modes for maximum flexibility. DBM-150 Booklet Maker – Compact, fully automatic booklet maker with precision folding and stapling. DBM-150 Trimmer – Integrated fore-edge trimming for clean, professional edges on every booklet. Why Choose the Duplo 150? Ease of Operation – PC-controlled setup with automated adjustments for quick job changeovers. Flexible Production – Handles a wide range of sizes and stocks, ideal for digital workflows. Compact Design – A space-saving system combining feeding, folding, stapling, and trimming in one modular unit. High Efficiency – Continuous production of up to 2,400 booklets per hour with no wastage. Upgradeable System – Modular design allows additional Duplo devices to be added as business needs evolve. Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert operator training and ongoing support – we help you get the best results from your equipment. Competitive pricing on consumables – keep running costs low with our affordable supplies. Established and trusted supplier – years of experience in print finishing solutions, providing both new and used printing equipment. Specifications Manufacturer Duplo Model 150 Stock Number 114956 Max sheet size 320 x 460mm Min sheet size 120 x 210mm Max booklet capacity 25 sheets (100 pages) Max speed 2400 sets/hour Staple heads Heavy duty Isaberg Rapid R952 Stapling width Adjustable - 70, 108, 160, 258 & 276mm Cedpfx Aow Tmy Nofieri Paper type Fine quality: 64 to 127.9gsm, Art/Coated: 104.7 to 127.9gsm Cover: Fine quality, Art/Coated within 300gsm DSF-2200 Sheet Feeder Specifications: Feeding System Belt suction, top feed, air separation User features Ultrasonic double sheet detection, hand feeding, active anti-static bar Paper capacity 200mm and 60mm in each tray System power requirements 240v 50HZ Full system weight 260kg Full system dimensions W2540mm x D750mm x H840mm

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Codpfx Afouyh Uneisri

Condition: new, The UWF 3.2, a robust Universal Milling Machine in the category of Conventional Vertical Milling Machines, enhances the acclaimed UWF 3 with its advanced specifications. This versatile machine features a high-strength HT-200 cast-iron bed for exceptional rigidity and stability under heavy loads. It offers a generous setup area of 1,370 x 320 mm, while its precision-ground guideways ensure long-term accuracy and minimal wear. Operators can enjoy the flexibility of an infinitely variable servomotor feed across all three axes. Additionally, the universal cutter head swivels on two planes, enabling a swift transition from horizontal to vertical machining. Included are essential tools and features like a powerful coolant system and a chip tray to streamline your workflow. Whether in a repair workshop or for training applications, the UWF 3.2 stands out for its performance and reliability. To discover how this Universal Milling Machine can meet your production needs, request a quote today. Csdpfx Asuyh Alsfiori

Condition: new, The SB E 2060/2 is a robust Manual Folding Machine from KNUTH, designed to meet the demands of the Folding Machines category in the Manual Folding Machines group. With its sturdy cast-iron construction, this machine efficiently handles bending operations for large plates up to 2000 mm in length and a maximum plate thickness of 2 mm. Featuring a long male die stroke and a one-piece male die, the SB E 2060/2 ensures precision and durability in every application. The high counterweight facilitates easy bending, making it versatile for various tasks. Additionally, it comes with an operator manual to assist users in setup and safety. For those interested in reliable and powerful performance in sheet metal processing, this machine stands out. Ready to enhance your productivity? Request a quote today for the SB E 2060/2 and experience the benefits of a robust Folding Machine. Crjdpfx Ajn Tlg Ijfiji

Condition: new, The VHF 3.2 is a robust and versatile universal milling machine that fits seamlessly into the category of Conventional Vertical Milling Machines and the product group of Universal Milling Machines. This high-performance model enhances the proven capabilities of the VHF series, featuring a combination of a horizontal spindle and a swiveling vertical milling head, which expands its range of applications. Built with a rigid machine bed from high-strength HT-200 cast iron and equipped with precision-made headstock gears, the VHF 3.2 offers durability and reliability. Its extensive setup area of 1,370x320 mm and the ability to handle angular bores make it suitable for diverse tasks in both repair workshops and educational settings. The machine’s powerful servo-motor provides infinitely variable feed across all three axes, facilitating efficient operations. One can enjoy minimal downtime thanks to rapid positioning of the work table, alongside a comfortable control panel swiveling to enhance usability. Request a quote today to explore how the VHF 3.2 can elevate your machining capabilities in the realm of Conventional Vertical Milling Machines and Universal Milling Machines. Crodjn E Ni Hspfx Afioi