Motorcycle trailer

Unitrailer Motoanhänger MOTO 1

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Nwodpfx Aksvzmtze Uei Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: new, Year of construction: 2024, New machine Nsdpfx Ajwu Du Isk Uowi Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Nedey E S D Espfx Ak Ujwi

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, turning diameter: 433 mm, turning diameter over bed slide: 433 mm, turning diameter over top slide: 267 mm, turning length: 1,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 20 rpm, Turning diameter in gap: 711 mm, Colchester Mascot 1600 Gap Bed Lathe Model: Mascot 1600 Swing Over Bed: 433mm Nwodpfx Akeyt Nfhe Uei Swing Over Top Slide: 267mm Swing in Gap: 711mm Distance Between Centres : 1000mm Spindle Speeds: 20-1600 RPM Spindle Bore: 76mm Machine with: 3 – jaw chuck Ainjest Threading Attachment Fixed Steady Quick Change Toolpost with holders Digital Readout High Speed Threading

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady Nwodpfjxwp Ebsx Ak Uji

Condition: new, Year of construction: 2026, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Nwedpfsudi Uzsx Ak Uoi Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, functionality: fully functional, empty load weight: 169 kg, maximum load weight: 581 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,550 mm, trailer brake: trailer unbraked, Year of construction: 2026, MARTZ GP 3 Premium NEW VEHICLE Internal Dimensions: 230cm x 155cm Gross Weight: 750 kg Payload: 581 kg Unbraked Single-Axle Low-Loader Bolted and galvanized steel frame Folding drawbar 13-pin electrical system Plastic mudguards Jockey wheel 13-inch M+S tires 3x Motorcycle wheel chocks Loading ramp Multiple lashing points Front marker light Rear lights with reversing light, fog light, and triangular reflectors Optional accessories: -100 km/h upgrade -Rear supports -Spare wheel with bracket -Anti-slip plywood floor -Aluminum floor -Toolbox Further accessories available on request! Images are for illustrative purposes and may show optional equipment subject to surcharge. Plus registration documents and freight to Gera: €100 net Haven’t found the right trailer yet? Nsdpfoww Diqjx Ak Uswi We have 50–100 vehicles permanently in stock and ready for immediate collection. The workshop is open Monday to Friday from 8:00 am to 5:00 pm for repairs of all kinds. Specialist in axle repair, also for caravans. Ijbquowvi Ehopd Nfean Large selection of rental trailers available. In addition, we offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by in person.

Condition: new, empty load weight: 140 kg, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,400 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, 110 cm high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. Height of the side walls: 30 cm Height of the tarpaulin: 110 cm Total height of the loading area: 140 cm Advantages of the Garden Trailer 230 KIPP car trailer If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Nwodpfxot Iv Abs Ak Uji Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Nsdsypud Ujpfx Ak Uswi

Condition: new, Year of construction: 2026, CORMAK ZS-40B Industrial Pillar Drill The CORMAK ZS-40B is a technologically advanced industrial pillar drilling machine designed for intensive metalworking applications in workshops and production facilities. Equipped with a precision oil-bath gearbox, automatic vertical feed, and tapping functionality, the CORMAK ZS-40B metal drill press delivers reliability, efficiency, and outstanding drilling and threading performance. Key Advantages Automatic vertical feed – three feed rates (0.12, 0.18, and 0.25 mm/rev) allow optimal adjustment of cutting parameters to suit different materials. Tapping function with automatic spindle reversal – enables efficient internal thread cutting up to M32 without operator intervention. Oil-bath gearbox with hardened and ground gears – ensures smooth, quiet operation and long service life of the drive system. Rigid 115 mm diameter column – minimizes deflection and vibration, resulting in higher machining accuracy. Large rotating worktable with height adjustment – allows machining of large and irregularly shaped workpieces. Integrated cooling system as standard – improves drilling quality, extends tool life, and reduces the risk of overheating. Construction and Technology The CORMAK ZS-40B industrial drill press is engineered for continuous operation in demanding production environments. At its core is a mechanically driven gearbox lubricated in an oil bath, providing stable and reliable power transmission. The MT4 spindle taper accommodates a wide range of drilling and tapping tools, while the high rigidity of the spindle head and column assembly ensures precise hole machining. A transparent plexiglass chuck guard enhances operator safety while maintaining full visibility of the machining area. Precision and Productivity The automatic feed system enables repetitive drilling operations without operator fatigue, significantly improving productivity in serial production. The spindle speed range from 95 to 1600 rpm, combined with six gearbox speeds, allows precise adjustment of machining parameters to match the material and tooling requirements. A precision handwheel with depth scale provides accurate control over drilling depth. Applications The CORMAK ZS-40B drill press with tapping function is an ideal solution for: Manufacturing and assembly plants Mechanical and metalworking workshops Maintenance departments Tool rooms and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Cooling system with pump Plexiglass spindle guard Handwheel with graduated scale Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Column diameter 115 mm Distance from spindle axis to column 260 mm Maximum spindle-to-table distance 754 mm Maximum spindle-to-base distance 1270 mm Spindle speed range 95–1600 rpm Nwodsridv Sepfx Ak Uoi Number of speeds 6 Automatic feed rates 0.12 / 0.18 / 0.25 mm/rev Worktable dimensions 354 × 575 mm Overall height 2120 mm Motor power 1.1 kW (S1) / 1.6 kW (S6) Power supply 400 V / 50 Hz Weight 410 kg