Used Rod Shear for sale (4,535)

Condition: new, Year of construction: 2026, The machine has 5 workstations: • Punching station • Flat bar shear • Angle bar shear • Notching station • Bar steel shear (round and square) Technical data Strokes per minute with 20 mm stroke: 40 /min Throat depth 500 mm Punching force 800 kN Hole diameter and thickness up to max. 40×14 mm Flat steel up to max. 450×15 or 300×20 mm Angle steel 90 degrees up to max. 152x152x13 mm Angle steel 45 degrees up to max. 70x70x7 mm Gbsdpfezzkv Asx Abijw Bar steel up to max. 45 mm Square steel up to max. 45 mm Notching up to max. 12 mm

Condition: like new (used), 2 unused blades for guillotine shear to standard quality → sold as used. Length = 3150 mm Width 1 = 66.5 mm Width 2 = 68.5 mm Thickness = 19 mm Gjdjz Aybkjpfx Abiobw Through holes, D = 10 mm All further data can be found in the attached drawing.

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 3 mm, Somo Guillotine Model: SCE 15/3 Capacity: 1500 x 3 Adjustment: Motorized Godpfx Abszmihzoiobw Distance between uprights: 1580 Throat depth: 150 Used machine Internal code: SVR 430

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Manufacturer: Forrec Model: Granulator - 1000 R.A. Year of construction: 2019 Condition: used Category ID: 552 Gbodpfxozmyufo Abisw Type ID: 2731 Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1969, machine/vehicle number: HS 205-4, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 900 mm, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 175 bar, overall weight: 2,500 kg, total length: 2,600 mm, total width: 1,950 mm, total height: 1,400 mm, Equipment: emergency stop, foot remote control, A Wila brand plate shear in very good condition. It is comparable to the Safan brand. The machine is somewhat older. The back gauge moves very smoothly, but currently needs to be adjusted manually. It does not have a drive mechanism. Gbodpfx Ajz Dgttjbiew

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 3 mm, SHEARING MACHINE CMLL 2050 X 3 MODEL 20.3 TYPE: C 3 MOTORIZED GAUGE USED MACHINE, IN WORKING ORDER Gbedpsz Sbtyjfx Abisw INTERNAL CODE: SVR 447

Condition: used, Hand lever shears, long blade sheet and round steel shears, lever shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed Gedpfx Absv Eakboijbw -Hand lever: missing -Manufacturer: VEB Pels, lever shears, profile steel shears type HS 7 -Cutting insert length: 250 mm -Angle profile: see photos -Dimensions: 580/170/H600 mm -Weight: 76 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min Gsdpfepxmxcex Abiebw - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: new, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850x3270x2260 Gedpfx Aod Egqzebiebw

Condition: new, Year of construction: 2026, controller manufacturer: CYBELEC CybTouch, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 600 mm, power: 10 kW (13.60 HP), 2 in 1 = shear + press brake in one machine with control CYBELEC CybTouch 15'' shear capacity 3200 mm x 6 mm, throat 200 mm; press brake capacity 3040 mm, capacity 100 to; working hight 640 / 1240 mm, control CYBELEC CybTouch 15'', mot. back gauge 700 mm, shadow line, motor 7,5 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs Gbsdpfxed Huukj Abiow same machine with capacity L = 2200 mm or L = 1400 mm

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip Gsdpfxou Rimme Abisbw - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Gedpfx Aboudbzyeiobw Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic - 4 stations - Foot control - Emergency stop - 400 V Godpfx Aeu Havwobisbw

Condition: good (used), Rapid Load 12 Bar feeder Bar Loader Turn diameter bed: mm Turn diameter support: mm Passage: 6-80mm Turning length: 150-1215mm X axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation available Gbodpfxeuhznbe Abiow Location: Hamont-Achel, Belgium Rapid Load 12 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 6-80mm Turning length: 150-1215mm X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation present Location: Hamont-Achel, Belgium Rapid Load 12 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Opening range: 6-80 mm Drehlänge: 150-1215 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Minimum distance between sleeve and drilling spindle (X axis): mm Maximal distance between module and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Steuerung: Fanuc Construction year: 1997 Betriebszeiten: Transportmaße: 166x60x105 cm (LxWxH) Documentation verfügbar Standort: Hamont-Achel, Belgium

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 30800 € 588.28 € 85 to 300 mm Gbedpfewiqtgjx Abiew 5 40/15 bzw. 24x24 mm 450x15 / 450x18 mm 475 mm 130x130x13 mm 45/40 mm 12 mm 200x12 mm 9.2 kW 2300 mm 1200 mm 2100 mm 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades Gbsdpfxowiatvj Abisw - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 22400 € 430.08 € 80 to Godpfxjwirr Dj Abijbw 300 mm 5 40/14 bzw. 24/24 mm 70 mm 40 1/min 450x15 / 300x20 mm 130x130x13 mm 45 mm 12x52x90 mm 9 kW 2310 mm 1200 mm 2050 mm 2070 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm standard hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photo shows mod. hyd 80 SD) option "Kit" EURO 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models of HYD 80 series: model SD EURO 25.700,-- as model S but 500 mm gap weight 2.400 kg WE HAVE MORE THAN 700 REFERENCES!

Condition: new, Year of construction: 2025, neu 2025 090054 prompt, Zwischenverkauf v Spanien 17300 € 298.94 € 1 15570 € 55 to 250 mm 5 40/10 mm 20 mm 37 1/min 300x15 mm 120x10 mm 40 mm 10 mm 5 kW 1670 mm 1160 mm 2090 mm 1390 kg 2 foot pedal for independent working on 2 stations flatsteel station anglesteel station round- and square steel station rectangular notching station punching station table on flat steel station table on punching station table on notching station complete with hydraulic oil user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station Gbodpjwirxwofx Abiew magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 19600 € 376.32 € 55 to 500 mm 5 40/10 bzw. 20/20 mm 20 mm 37 1/min 300x15 / 200x20 mm 10x42x90 mm 5 kW 2100 mm 1160 mm 2090 mm 1750 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, Ankörnvorrichtung oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp Gbsdewirgbjpfx Abijw 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Gedpfsvaatlex Abiobw Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: good (used), Heavy-duty electric tin snips Functional, ready for use Cutting width 2,000 mm Sheet thickness 8 mm Motor 7.5 kw Gbedpfeviubpjx Abiow

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Infeed dimensions 650mm x 250mm Gjdowu Nwnopfx Abijbw with infeed vibrating trough

Condition: good (used), Year of construction: 2007, machine/vehicle number: 3408, Offer 26249 Technical data: - max. cutting width 2030 mm - max. cutting capacity at 45 Kp/mm² 6 mm - front angle stop - front support arms - rear stop 5 - 750 mm - foot pedal - drive 400 V / 4 kW - pneumatic connection 6 bar Gsdpfx Aboz Rmxkjiobw - space requirement approx. W 3600 x H 1250 x D 1900 mm - weight approx. 4 t

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 61800 € 1168.02 € 3100 mm 13 mm 8 mm 50 mm 13 1/min Gbodpewir D Hefx Abisw 1.75 ° 16 37 to 1000 mm 200 mm/s 30 kW 330 l 2 Stk. 840 mm 600 mm 3550 mm 4280 mm 2300 mm 3600 mm 2350 mm 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 25000 € 480 € 2050 mm 6 mm 30 1/min 2.3 ° 750 mm 7.5 kW 800 mm 530 mm 2355 mm 2720 mm 1630 mm 1230 mm 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Godpfxjwp S Swe Abijbw Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection