Used Residual Ozone Destroyer for sale (1,095)

Condition: used, tank capacity: 18 l, GENERAL Construction type: upright Remarks: Diameter of lid opening approx. 180 mm; 1 screwed-on drain valve (inner diameter of pipe approx. 9 mm; hand lever of drain valve missing); this drain is not located at the lowest point of the vessel (see photos) Internal diameter: 270 mm Overall height: 550 mm Location: Bremen Pgedpfxeyci Arj Ag Nog Volume: 18 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: cosmetics VESSEL Support type: stand ring EQUIPMENT Note: slight residues

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Heating/cooling jacket can also be operated at 3 bar and 143°C (see photo of the nameplate); minor dents in the insulation jacket; sheet metal incisions in the insulation (especially in the lower base) External diameter: 1,830 mm Internal diameter: 1,690 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating pressure: 4.0 bar Agitator: agitator flange Location: Bremen Cylinder temperature control: Thermoplate Nameplate: Volume: 5,000 liters Double jacket volume: 58.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Previous application: food industry TANK Max. permissible operating temperature: 100 °C Support type: feet Number of feet: 3 pcs. HEATING/COOLING JACKET Pgsdpjyciy Rjfx Ag Njg Bottom temperature control: Thermoplate INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 50 mm Note: slight residues MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: off-center in top head

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Construction: upright Remarks: Manhole diameter approx. 420 mm Internal diameter: 1,190 mm Total height: 2,550 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Pgodeycix Tepfx Ag Nsg Vacuum: 1.0 bar Volume: 1,000 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 950 mm Previous use: biochemistry TANK Max. permissible operating temperature: 200 °C Stand type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head Outlet: 53 mm Note: slight residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel

Condition: used, Year of construction: 2005, tank capacity: 1,085 l, GENERAL Features: crane lugs, control cabinet (without guarantee) Design: vertical Year of manufacture: 2005 Remarks: Welded stainless steel ring on the outside of the vessel (protrudes approx. 100 mm from the outer diameter (insulation)) Outside diameter: 1,130 mm Inside diameter: 990 mm Total height: 2,150 mm Heating/cooling: yes Insulation: yes Power: 1.1 kW Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.5 bar Top head: welded lid with hinged segment Agitator: propeller type Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 1,085 liters Double jacket volume: 17.0 liters Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,240 mm Previous use: biochemistry VESSEL Max. permissible operating temperature: 95 °C Base design: feet Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Pgedpfxjycixtj Ag Neg Outlet: 48 mm Note: slight residues/adherences MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Voltage: 400 V Interference suppressor: Agitator arrangement: eccentric on top head Agitator features: speed control via control cabinet

Condition: used, tank capacity: 530 l, GENERAL Design: vertical Remarks: handhole DN 200 Internal diameter: 790 mm Total height: 1,850 mm Max. overpressure: 3.2 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 530 litres Pgsdpfx Ajycixasg Nsg Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 850 mm Last application: biochemistry VESSEL Max. permissible operating temperature: 100 °C Base design: feet Number of feet: 3 pcs EQUIPMENT Manhole / Dome: handhole Outlet: 48 mm Note: slight residues MATERIAL Feet material: stainless steel

Condition: used, tank capacity: 400 l, GENERAL Design: vertical Internal diameter: 990 mm Total height: 1,700 mm Psdpfx Aeyciw Nsg Njgg Location: Bremen Volume: 400 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 480 mm Previous use: Biochemistry TANK Support type: height-adjustable legs Number of legs: 3 pcs EQUIPMENT Manhole / Dome: on the top head (Ø 430) Outlet: flange DN50 Note: slight residues MATERIAL SPECIFICATION Leg material: stainless steel

Condition: used, tank capacity: 715 l, GENERAL Equipment: Level indicator (without guarantee) Design: horizontal Remarks: 1 manhole with a 400 mm diameter in the front end Internal diameter: 790 mm Pedpfx Aoyciwveg Nsgg Total height: 1,750 mm Total length: 2,100 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 715 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical length: 1,230 mm Last application: Biochemistry TANK Max. permitted operating temperature: 200 °C Support type: feet Number of feet: 3 pcs EQUIPMENT Outlet: 43 mm Note: light residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel

Condition: used, Year of construction: 2018, machine/vehicle number: 519553, Central extraction system Höcker Polytechnik with rotary valve and/or dust bins.(Option: rotary valve instead of dust bins) Manufacturer: Höcker Polytechnik Type: Multistar JQ6/5 131/20717A Year of manufacture: 11/2018 Dust properties: Dust and chips Material throughput: Unknown Jet cleaning of filters Volume flow: Approx. 22,000 m³/h Disposal type: Open Clean air duct: Air recirculation Residual dust content: 0.1 mg/m³ based on dust. 1 piece Filter system, galvanized - Year of manufacture 11/2018 - Multistar JQ6/5 131/20717A - Filter area: approx. 131m² - Filter bags: 120 - Filter bag diameter: 170mm - Filter bag length: 2,070mm - Filter cleaning Air Jet, compressed air - Filter housing made of galvanized sheet steel - Inspection door, access ladder, standing platform - Tested pressure relief areas - Raw gas section as large expansion chamber - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, hot-dip galvanized. - Includes dry extinguishing line, C connection - *Optionally with 6 chip bins or large rotary valve*2 pieces Clean air fans DER 404/400/18.5-2 - Volume flow: 11,000 m³/h per fan - Directly driven fans - Galvanized sheet steel - Installed horizontally in Multistar series - Electrical power of each fan 18.5 kW - Total volume flow 22,000 m³/h - Total pressure increase: 4,600 Pa 1 piece Pipe components Air recirculation - Including galvanized ducts - Must be supplemented for a new location . 1 piece Control cabinet With PLC Siemens S7-1200 Dustproof sheet steel standard housing control cabinet as wall cabinet, built and completely wired, in accordance with VDE regulations 0100, 0113, and DIN 57113. The scope of delivery includes all components required for control components and the circuit igned for: · Jet cleaning control Pgsdpfxoya Idvo Ag Nog · Control of 2 fans · 6 automatic start-up of the fans when the machine starts · Pressure monitoring indicator light · 3 control butterfly valves · Rotary valve controlDimensions: - Length: 3,960 mm - Width: 3,380 mm - Height: 5,900 mm (may vary depending on equipment) Electrical connection value: - approx. 38 kW - 400 V/50 Hz - Control voltage 230 V AC/24 V DC Location at warehouse

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection Pjdpfxox D E Hbo Ag Njgg • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: used, mileage: 109,000 km, power: 132 kW (179.47 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,548 mm, total width: 2,070 mm, total height: 2,499 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, navigation system, For sale here is a well-maintained Opel Movano B L2-H2 featuring the globally popular 2.3-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 6d emissions standard * One previous owner Pedpfx Aoydudqog Nsgg Equipment: Panel van L2-H2 * Automatic transmission * Automatic climate control * Navigation system * Cruise control * Reversing camera * Rear parking sensors (PDC) * Tow bar * Suspension seat (driver) * Heated seats * Truck homologation * Heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * 3 seats * Central locking * And much more... Technical Data: Gross Vehicle Weight Rating: 3,500 kg * Unladen weight: 2,050 kg * Payload: 1,450 kg * Towing capacity: 2,500 kg Why choose us? * Attractive financing through our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your used vehicle at fair conditions * Transit license plates (5-day/customs registration), usually same day * Airport or train station shuttle service All vehicles are professionally reconditioned and hygienically clean! Highlights: Interior and ventilation system disinfected by ozone treatment. Two-stage exterior polishing * Paint correction and smart repair where necessary All our vehicles have also undergone thorough maintenance. Naturally, this includes fresh fluids, filters, and all routine service work you shouldn’t have to worry about. Optionally, we can present the vehicle at an independent testing organization or workshop of your choice. We appreciate your interest and are available around the clock for all your questions and needs. If you have any questions, comments, or specific requests, please don’t hesitate to contact us! More information and an insight into our business philosophy are available at Special Equipment: Storage compartment on dashboard, Navi 80 IntelliLink audio navigation system (DAB+), Edition package, rear parking aid incl. reversing camera, Driver Assistance Package 2, LED cargo area lighting, Wireless charging tray for smartphone, automatic climate control, 105L fuel tank, load compartment partition with window, smoker's package, tire repair kit, permanent rear view camera, sliding door right loading/passenger area with window, cab seats: heated driver’s seat, cab seats: suspension seat (driver’s side), rear entry step Additional equipment: Driver airbag, electr. adjustable and heated exterior mirrors, single tires on 2nd/rear axle, Side Wind Assist, 185A alternator, rear wing doors without glazing (180-degree opening angle), high roof H2, allowable total weight 3.5t, interior pollen filter, high-roof box body standard, body variant: vehicle length L2, body variant: high roof (H2), adjustable steering column (steering wheel), headlight range adjustment, model update, engine 2.3L – 132kW CDTI, wheelbase 3,682 mm, low emissions to Euro 6d-TEMP standard, Visibility Package, steel wheels 6.5x16, Start/Stop system, LED daytime running lights, allowable total weight 3.5t.

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Pgodpfx Agoycuflo Njg Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: new, Year of construction: 2025, NEW MACHINE Equipment: 2 x nickel-plated air table 1000 x 1000 2 x HSS knives OPTIKNIFE knife changing device Tool kit 18.5" touch color display 6-month Polar warranty on replacement parts (excluding labor costs), valid from the date of installation, provided that installation and commissioning are carried out by Polar-trained specialists. Technica Data: Cutting width 1,370 mm Insertion depth 1,450 mm Max. insertion height 165 mm Pgedjxazbtepfx Ag Njg Safety pressing pressure 30 daN Press pressure, min 150 daN Press pressure, max 5,500 daN Saddle speed return (0 - ...) 300 mm/sec Blade speed 45 cycles/min Residual cut, automatic, without cover plate 25 mm Residual cut, automatic, with cover plate

Condition: used, Year of construction: 2018, Executed according to FprEN 16770 Tested according to GS-HO-07 testing principles of BGHM Offline filter cleaning with automatic fire extinguishing system The dust extractor is a suction and filter unit for commercial use, designed for installation in the workplace. The dust extractor is suitable for capturing, conveying, and filtering dry wood, paper, or plastic chips and dusts from one or several processing machines. The unit is delivered fully assembled and ready for operation. Consisting of: - Pressure-resistant and pressure surge-resistant housing (>200 mbar) - Suction nozzle with non-return valve - Antistatic filter elements - Jet-pulse cleaning - High-performance radial fan with IE3 efficiency class three-phase motor (arranged on the clean air side) - Exhaust air silencer and air outlet grille - Control unit with CEE plug (phase inverter) - Automatic start control for up to 6 machines (activation via current coils or potential-free contacts possible) - Automatic filter cleaning with runtime addition - Integrated extinguishing system - Painted RAL 9006 Compressed air, prepared on site, must be supplied to the unit for cleaning (connection via NW7 coupling / 6 bar). A water pipe, provided on site, must be connected to the unit for the fire extinguishing system (connection via ½" union fitting, min. 0.5 bar). Technical data dust extractor: - Suction nozzle diameter: 355 mm - Residual dust content: < 0.1 mg/m³ (H3) - Filter area: 26 m² - Cleaning: Jet-pulse automatic with runtime addition (offline) - Volume flow: 10,000 m³/h - Standard application design nominal volume flow: 7,130 m³/h at 20 m/s at suction nozzle - Negative pressure: 3,000 Pa at suction nozzle at nominal volume flow - Sound pressure level: 72 dB(A) at 1 m away from the unit - Motor power: 15.0 kW - Motor data: 400 V / 50 Hz / 3000 min⁻¹ / IP54 - Dimensions (L x W x H): 3,500 x 900 x 2,400 mm - Weight: 1,020 kg SPÄNEX Briquetting Press Type SHB 70 RS Price: €15,000.00 Podpfx Aoyfp Srsg Nogg Transport pipe 110 x 3.2 mm for SHB 70 RS Machine number briquetting press: 2570/2018 Intermediate hopper 1.2 m³ for attachment to the SMU 100 dust extractor, integrated rotary discharger with gear motor, opening for connection to a briquetting press or rotary valve, galvanized finish for stepless adjustment of fan performance to actual demand via variable adjustment of fan drive speed. The frequency converter increases system effectiveness, saves energy, and reduces wear on material and machinery. - Motor power: 15 kW - Integrated PID controller - Automatic energy optimization for maximum motor efficiency, even in partial load range - Integrated manual/automatic switch-over - Startup menu for quick parameterization - Integrated RFI filter according to EN 55011 - 1 B - Synchronization with already running motor - Device design: IP 55 1 pressure gauge for controlling the frequency converter and thus the power consumption depending on the open machine dampers, including connection hose to the pipework Dust extractor SMU control expansion kit BA, 1 pc, consisting of: - Slide valve control for up to 16 machines - 14 current coils - Multi-tone horn with beacon Rotary paddle bulk goods level indicator, 1 pc, in the intermediate hopper of the dust extractor, ATEX II ½ Ex tD A20/21 marking, to indicate maximum fill level and control a conveying system (system-specific) Storage location: Supplier

Condition: used, mileage: 495,000 km, power: 290 kW (394.29 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 88 m³, loading space length: 7,720 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Orten SafeServer body * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Keg beer certificate * Chemical certificate (IBC) * Waste paper certificate * 2,500 kg Dhollandia tail lift * 4 rows of load securing rails * Medium-length cab with 1 bed * Liftable, steering trailing axle * Leaf/air suspension * Retarder * Air conditioning * Cruise control * Differential lock * Spoiler * Sun visor * Heated seat * Automatic transmission * Euro 6 * Bluetooth radio together with Tandem SafeServer trailer * GVWR 18,000 kg * Payload 12,945 kg * First registration 09/2015 Psdpfx Ajxmn Erog Nsgg * Cargo space dimensions: 7,720 x 2,490 x 2,300 mm * 2,500 kg Dhollandia tail lift * BPW axles * Disc brakes ---- Special equipment: Trailer brake 2-line, Audio system: CD radio (Bluetooth), Exhaust outlet down right, 220 Ah battery, Compressed air connection in cab, Suspension: front suspension 7.5 t, single leaf, Info display 10.4 cm with additional indicator, Fuel tank: 630 liters aluminum, Roof air deflector (lockable), Reinforced engine brake, Steering, liftable trailing axle, Retarder, Tail lift control switch, Reinforced rear cross member, Fleet management system interface, Cab seats: passenger seat with armrest, Cab seats: driver's comfort suspension seat, Cab seats: foldable driver seatback, External sun visor, Side window sun blind, Driver's door, 12V socket in passenger footwell, additional 24V socket in passenger footwell, Automatic daytime running lights, Additional thermal insulation, Additional heater (water) Further equipment: EURO 6 emission standard, Axle configuration: 6x2, Front axle load 7.5 t, 24V trailer socket / 15-pin, Antos, Exterior mirrors electrically adjustable and heated, Rear axle differential lock, Steel air reservoir, Medium compressed air unit, Driver assistance system: Lane departure warning, Cab: width 2.30 m, Cab: hydraulic tilting system, Cab: M ClassicSpace, Standard steel cab suspension, Cab floor with 320 mm engine tunnel, Leaf/air suspension, Electric windows, Tinted windscreen, 100 A alternator, 12-speed transmission - type: G 211-12, Urea (AdBlue) tank: 60 liters, Manual lifting roof (steel), Rear axle crown wheel 440, Body/chassis: chassis, Central locking system, Non-variable power steering pump, Front air intake, Two-stage air compressor, Engine 10.7 liters - 290 kW R6 diesel (OM 470), Engine compartment encapsulation, Single tires on trailing axle, Wheelbase 4,900 mm, Ramp mirror, Spare wheel, Residual heat utilization, Disc brakes front and rear axle, Seat cover/upholstery: fabric, Cab seats: multifunction passenger seat, Front mudguards, Front axle stabilizer, Additional stabilizer, rear/trailing axle, Cab 24V socket, Tachograph / EC control device, Aerodynamically shaped underbody panel, Front underrun protection, Toll system pre-equipment, Dropped front axle, Controlled water pump, Permissible total weight 25.00 t

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Psdexx Avpopfx Ag Nsgg Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: used, This listing is for 1 of 7 Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) Pgodexhdx Dspfx Ag Neg 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Podpjxhfqbjfx Ag Negg Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Year of construction: 2018, condition: used, This listing is for a Solaris Biotech Solution Jupiter 3.0 Fermentor. The unit is in full working condition and is ready for immediate release. The Solaris Biotech Solution Jupiter 3.0 Fermentor is a highly versatile and configurable bioreactor system, ideal for laboratory-scale applications. With advanced automation and robust design, it caters to a wide range of research and development needs, as well as small-scale production. Key Features: Autoclavable and Sterilizable Design: Ensures ease of cleaning, sterility, and reliable operation for contamination-free processes. Flexible Vessel Options: Available in various aspect ratios and thermoregulation designs, with total volumes ranging from 2.0 L to 10.0 L. Pressure Control: Handles pressures up to 1.6 bar in the 2 L and 4 L jacketed vessels, with continuous gas-in and gas-out flux. Innovative SCADA Software (LEONARDO 3.0): Provides automated management of fermentation and cultivation processes, ensuring precision and ease of operation. Parallel Management: Supports simultaneous operation of up to 24 units via a single HMI with a 24” display, streamlining complex workflows. Remote Access: Enables monitoring and control via PC, tablet, or smartphone, using QR code scanning or a dedicated web portal for remote convenience. Applications: Process Development and Optimization: Facilitates experimentation and optimization of bioprocesses for scale-up and scale-down studies. Education and Research: Pgsdpoxxz T Hsfx Ag Njg Suitable for educational purposes and basic research in bioprocessing. Small-Scale Production: Supports small-batch manufacturing and pilot-scale processes. Benefits: Cost-Effective Performance: Combines advanced features with affordability for laboratory and production environments. High Level of Automation: Simplifies management of fermentation and cultivation with LEONARDO 3.0 software, reducing operator workload. Versatility and Configurability: Adaptable to a wide variety of applications, ensuring compliance with validated GMP regulations. Technical Specifications: Material: VALOX resin (external) and silicone (internal) Autoclavable: 121-133°C for up to 30 minutes Residual Volume: 0.04 mL Flow Rate: 65 mL/min

Condition: used, This listing is for the Scotsman AF80 Ice Flake Maker The unit is in full working condition and is ready for immediate use Key Specifications Max Ice Production: 70 kg per 24 hours Storage Bin Capacity: 25 kg Ice Type: Flake ice with 25% residual water content Water Consumption: 2.2 litres per hour Pgjdpjxv Dprofx Ag Neg Energy Consumption: 6.9 kWh per 24 hours Drain Type: Gravity drain Refrigerant: R134a Net Unit Weight: 50 kg Dimensions (HxWxD): 890 x 535 x 620 mm Power Supply: 230V, 10A, UK 3-pin plug Airflow: Front-in, front-out for built-in installation Access: Front access for maintenance and cleaning Operation: Electronically controlled Sanitation: XSafe – natural, automatic sanitation system Construction: Corrosion-resistant stainless steel exterior Design: Ergonomically convenient for user handling

Condition: used, This listing is for a Sartorius YCW653 5KG / F1 Weight. The unit is in full working condition and is ready for immediate release. The Sartorius YCW653 5KG / F1 Calibration Weight is a high-precision weight designed for the accurate calibration of balances and scales. Manufactured to meet stringent F1 accuracy class standards, this weight is ideal for laboratories, industrial settings, and quality control environments where exact measurements are critical. Sartorius calibration weights are crafted from premium stainless steel, ensuring long-term durability and resistance to corrosion. This 5KG weight provides consistent and reliable calibration, maintaining the accuracy of your measuring instruments. Key Features: F1 Accuracy Class: This calibration weight complies with OIML F1 standards, ensuring a high level of precision suitable for high-accuracy balance calibration. Premium Stainless Steel Construction: The weight is made from high-quality stainless steel, providing exceptional durability and corrosion resistance for long-lasting performance. Polished Finish: The smooth, polished surface minimizes contamination risk and makes cleaning easy, ensuring the weight remains free from dirt or residue that could affect accuracy. Precision Manufacturing: Sartorius weights are precision-machined to offer superior consistency, making them ideal for calibrating sensitive laboratory equipment. Protective Case Included: The YCW653 comes with a secure protective case for safe storage and transportation, preventing damage during handling. Pgedpfx Aexx Accog Njg Specifications: Weight Class: F1 (OIML) Nominal Weight: 5 kg Material: Stainless steel Surface Finish: Polished Calibration Tolerance: In line with F1 class standards Storage Case: Included for secure protection Applications: Suitable for use in laboratory, industrial, and quality assurance settings.

Condition: used, This listing is for a 1 of 2 Charles Austin Capex 8C Diaphram Pump. The unit is in full working condition and is ready for immediate release. The Charles Austin Capex 8C is a highly efficient diaphragm pump designed to deliver a clean, oil-free vacuum and pressure source tailored for laboratory benchtop use. With its durable alloy casing and advanced engineering, the Capex 8C sets a new standard in versatile laboratory vacuum and pressure solutions. Pgjdpfx Agoxxx U Io Njg Features: - Oil-Free Operation: Ensures a clean environment, making it suitable for sensitive applications like microbiology and IVF treatments. - Quiet Running: Designed for low noise levels, ideal for use in laboratories without disrupting ongoing work. - Compliant with IEC 1010: Meets electrical safety standards, ensuring safe operation in laboratory settings. - Versatile Applications: Perfect for vacuum and pressure-assisted filtration, residue analysis, gas monitoring, and evacuating rotary evaporators or desiccators. - Lightweight Design: Easy to transport and reposition, enhancing usability across different workstations in a lab. Key Specifications: - Maximum Flow Rate: 8 L/min - Vacuum Level: 240 mbar (excellent for sensitive applications) - Pressure Capability: 200 kPa - Motor Type: Shaded pole motor for quiet and efficient operation - Dimensions: 282 mm (W) x 214 mm (D) x 137 mm (H) - Weight: 3.75 kg (lightweight and portable) Multipurpose Applications: - Microbiology Experiments: Ideal for creating a sterile environment during sample handling. - Embalming Procedures: Provides reliable pressure and vacuum for fluid transfer. - IVF Treatment: Ensures a clean, controlled environment for sensitive biological processes. - Waterjet Pump Replacement: A reliable alternative for general laboratory duties. - Aspiration and Filtration: Effective for removing particles and contaminants from samples. - Beauty Therapy: Used for vacuum treatments in cosmetic procedures.

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Cut-to-length edge strips: Pgedpfx Aex U U Dtog Nog Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy Trimming Unit SKF-L 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Condition: used, mileage: 109,000 km, power: 132 kW (179.47 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,548 mm, total width: 2,070 mm, total height: 2,499 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, navigation system, For sale here is a well-maintained Opel Movano B L2-H2 equipped with the globally popular 2.3-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6d emissions standard * 1 previous owner Features: * Panel van L2-H2 * Automatic transmission * Automatic climate control * Navigation system * Cruise control * Rearview camera * Rear Park Distance Control (PDC) * Tow bar * Suspension seat, driver’s side * Seat heating * Truck registration * Heated exterior mirrors * Electric exterior mirrors * Electric windows * 3 seats * Central locking * and much more... Pgedpfeycpawsx Ag Nog Technical data: Permissible gross weight: 3,500 kg * Curb weight: 2,050 kg * Payload: 1,450 kg * Towing capacity: 2,500 kg Why are we the right choice? Attractive financing options via our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your used vehicle at fair conditions * Transit license plates (5-day / customs registration) usually available the same day * Pick-up service from the airport or train station All vehicles are professionally reconditioned and hygienically clean! Highlights: Interior and ventilation system disinfection using ozone cleaning, 2-stage exterior polishing, and if necessary, paint correction and smart repair. All our vehicles have undergone thorough maintenance. Naturally, this includes new fluids, filters, and other required services, so you don’t have to worry about anything. Optionally, we can present the vehicle at an independent testing center or workshop of your choice. We look forward to your interest and are available around the clock to assist you fully. If you have questions, comments, or special requests, do not hesitate to contact us! More information and insights into our business philosophy can be found at Special equipment: Storage compartment on dashboard, audio/navigation system Navi 80 IntelliLink (DAB+), Edition package, rear parking sensors including rearview camera, Driver Assistance Package 2, cargo area LED lighting, wireless smartphone charging cradle, automatic climate control, 105-liter fuel tank, bulkhead with window, smoker package, tire repair kit, permanent rearview camera, right side sliding door (cargo/passenger compartment) with window, heated driver’s seat, driver’s suspension seat, rear step Further features: Driver airbag, electrically adjustable and heated exterior mirrors, single tires on 2nd/rear axle, Side Wind Assist, 185 A alternator, rear wing doors without glazing (opening angle 180°), high roof H2, permissible gross weight 3.5 t, interior filter: pollen filter, body/type: high cube standard van, body variant: vehicle length L2, body variant: high roof (H2), adjustable steering column (steering wheel), headlight range adjustment, model update, engine 2.3 L – 132 kW CDTI, wheelbase 3,682 mm, low emission according to Euro 6d-TEMP, Visibility Package, steel wheels 6.5x16, Start/Stop system, LED daytime running lights, permissible gross weight 3.5 t

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 01/2027, overall weight: 195 kg, total length: 655 mm, total width: 720 mm, total height: 1,400 mm, ejection height: 470 mm, Ismar Junior 4 Bread Residue Crusher Suitable for all types of light/dark leftover bread, etc. "The Universal Crusher" Ismar Model: Junior 4 Bread Residue Crusher Simple, robust technology DGUV V3 tested – exclusively by us Connection: 400V, 16A-CEE plug Dimensions: 850 x 950 x 1485 mm (W x D x H) Pgjdpjyakh Rofx Ag Nsg Used machine, cleaned Options: Service package Maintenance contract Delivery service Training & commissioning We have many more bakery machines in stock!

Condition: used, mileage: 380,300 km, power: 375 kW (509.86 HP), first registration: 04/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Lowliner * Full service history ---- ----* 12-speed automatic transmission * Front axle with air suspension * Front axle load 8.0 t * Electronic Brake System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary oil retarder * Wheelbase 3,700 mm * Aerodynamic side panels * Comfort driver's air suspension seat * Massage function for driver's seat * Upper comfort bed, wide, levelling * Lower comfort bed * Lower mattress, PremiumComfort * Shaving mirror * Electrically operated sunblind, one-piece * LED ambient lighting, driving and living area * StyleLine * Electric stationary air conditioning * Automatic climate control * Residual heat utilisation * Auxiliary hot water heater, cab * Additional thermal insulation, cab * Electrically operated sliding/lifting roof, glass version * Interface, Fleet Management System (FMS) * 24 V trailer socket, 15-pin * ExtraLine * Illuminated Mercedes star * GigaSpace cab, 2.50 m wide, flat floor * Long cab * Cab width 2.50 m * Comfort cab suspension, air-sprung * Fixed air deflector with end flaps * Transparent exterior sun visor * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Seat heating for driver's seat * Tyres 295/60 R 22.5 drive axle * Tyres 355/50 R 22.5 front axle/leading axle/lift axle Pedpfxsyfkcfo Ag Nsgg * Air suspension, rear axle Lowliner * Sound system * Navigation system * Axle load measuring system * Fuel tank 390 litres * AdBlue tank 60 litres * Fuel tank 290 litres * Automatic high/low beam and cornering lights * Headlamp cleaning system * Engine OM 471, R6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine version Euro 6, E * High performance engine brake * Safety Package * Climate Package * Economy Package * Driving Package * Comfort Package * Sight Package * Actros Driver Extent * Fifth wheel coupling, with plate, Jost JSK 42MK * Aluminium rims 9.00 x 22.5 * Aluminium rims 11.75 x 22.5, front axle * Electronic Stability Program (ESP) * Lane Keeping Assist * Adaptive Cruise Control * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Active Sideguard Assist * Tyre pressure monitoring system * Active Drive Assist 2 * Driver airbag * Cruise control * Actros Model Generation 5 * Refrigerator in drawer under bed * EBS * Metallic paintwork * Without spare wheel ----Sale only to business customers! No warranty for the details provided! Subject to prior sale! Our general terms and conditions exclusively apply! We are happy to provide you with a leasing or financing offer.