Used Radial Arm Saw for sale (10,723)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Kljdpfxjlhwr Ro Aaljp Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm Klsdsx U Tymjpfx Aalep - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Klodpfx Ajx Sx D Sealjp Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 15747225, saw blade diameter: 565 mm, cutting height (max.): 200 mm, total length: 2,800 mm, total width: 2,070 mm, extraction nozzle diameter: 60 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 2,800 rpm, cutting length (max.): 1,140 mm, table length: 2,400 mm, table width: 1,580 mm, saw drive: 5,500 W, extraction connection diameter: 100 mm, spindle speed (min.): 2,800 rpm, spindle speed (max.): 2,800 rpm, height adjustment type: mechanical, saw blade bore: 30 mm, spindle motor power: 5,500 W, main saw diameter: 565 mm, saw blade speed: 2,800 rpm, Equipment: motor brake, saw blade guard, For sale: Professional MAGGI BEST 1250S radial arm saw. Year of manufacture: 2021. In actual use for approx. 3-4 years, only occasionally in a carpentry workshop, never in large-scale production, in very good technical and visual condition. The only flaw is the MDF worktable, which became warped after being removed for a period of time. However, the cost of a new 2800 x 2070 mm board is less than 500 PLN and the shape of the worktop can be customized. The machine is fully operational and ready for work. I issue a 23% VAT invoice, price is net. You can inspect the machine on site. Transport can be arranged at extra cost. Available immediately. The Maggi BEST 1250 S is a saw designed for processing solid wood and wood-based panels (MDF, chipboard, plywood, laminated boards, and similar materials) up to 3 meters in length, suitable for: • Miter cuts from 0° to 45° (to the left) • Vertical straight cuts (90°) and bevel cuts (0° to 45° left and right). It is referred to as a radial arm saw because it is equipped with pneumatic mechanisms specifically developed for making precise miter cuts in wood. The tool is user-friendly, while also being very precise and robust. CONSTRUCTION The saw features a solid steel frame, cast iron arm and base, and interchangeable guides made of hardened steel. The carriage, equipped with 8 bearings, ensures fast and precise sliding. Thanks to a 5.5 kW motor and a maximum cutting height of up to 200 mm, the machine is ideal for particularly demanding tasks such as beams and construction work. Quick adjustments are possible using the front crank for height regulation of the saw unit. This model has a maximum cutting width of up to 1140 mm. SAFETY A sound-insulated housing with total blade coverage and safety micro-switch, anti-kickback protection, properly sized worktable, and emergency stop button significantly enhance operator safety during operation. TECHNICAL SPECIFICATIONS: Max. blade diameter: 565 mm Blade bore diameter: 30 mm Guard height above the table: 0 – 40 mm Kodpfeyhhz Rjx Aalelp Max. cutting height with 565 mm blade: 200 mm Max. cutting length with 565 mm blade: 1140 x 20 mm (height) Min. cutting length with 565 mm blade: 970 x 200 mm (height) Max. cutting height at 45° tilt: 0 - 135 mm Cutting length at 45° right – min./max.: 675 – 785 mm Cutting length at 45° left – min./max.: 385 – 595 mm Motor: 5.5 kW Motor speed: 2800 rpm Dust extraction port in blade guard: 60 mm Dust extraction port at machine rear: 100 mm Table dimensions: 2400 x 1580 mm MAIN FEATURES: • Motor with electric brake • Steel, sound-insulated blade guard • Arm and base made of cast iron • Carriage runs on 8 bearings • Large rear cover with chip extraction port • Replaceable MDF worktable • Manufactured by the Italian company MAGGI • Made in accordance with CE standards

Condition: excellent (used), functionality: fully functional, DeWalt 900 radial saw Kljdowr Dyxopfx Aalsp Specification: • condition - after inspection, fully functional • manufacturer - DeWalt • model - 900 • blade diameter max 350 mm • max dimensions of the cut element 110 x 900 mm (currently 750 mm) • cutting adjustment in three planes • extraction nozzle fi 50 mm • table top dimensions 140 x 110 cm • overall dimensions - 150 x 140 x 160 cm (length x width x height) Additional information: • the machine is in very good technical condition, ready for immediate use • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: used, Year of construction: 1999, Steel frame, cast iron arms and slides Mounting on 4 profiled rollers on ø25mm slides Blade ø350mm AL30 Cutting height 110mm Cutting capacity 680mm Kljdsppmtuspfx Aalop Engine power 3kw 3000 rpm extra-flat motor Voltage 380V Engine tilt to the left from 0° to 75° Crank up and down on the front of the machine Suction outlet diameter 120mm 180cm/170cm/H160cm +- 420kg

Condition: ready for operation (used), Technical characteristics 45 ° right and left tilt useful arm length 440 mm right and left rotation machine on pedestal Power and Motors Kljdjuaihtopfx Aalop Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Kledpfx Asucitzsalsp Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 1000 mm Width: 2000 mm Height: 1700 mm

Condition: ready for operation (used), Technical characteristics Radial table saw Table dimensions : 1150 x 1120 mm Motor power 2.9 kW (4 hp) Max. blade diameter : 350 mm Blade bore : 30 mm 90° cutting dimensions : 660 x 105 mm Cutting dimensions at 45° : 480 x 105 mm Cast-iron gooseneck : 1300 mm Suction nozzle : 120 mm Power and Motors Voltage: 380 V Kjdpfjun Eg Ajx Aaljlp Pluging: Three-phased Power: 4 Kw Motor: 4 CV Overall dimensions Lenght: 2070 mm Width: 1650 mm Height: 1730 mm Weight: 400 Kg

Condition: ready for operation (used), Technical characteristics special for angled cutting of the edge and grooving for laying joint nails 1500 mm aluminum trolley Oleopneumatic advance Cutter diameter 160 mm Bi-manual control Diamètre lame400 mm Kodjuaihyepfx Aalelp Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Frontal stroke 1100 mm Blade diameter 450 mm Tilting and swiveling blade right/left Kedpsuaihgofx Aaljlp Cutting height Motor 3,7 kW Mould block diameter 250 mm Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Longueur de coupe500 mm Hauteur de coupe80 mm Diamètre lame250 mm Power and Motors Voltage: 380 V Motor: 2 CV Overall dimensions Klodpfx Aaeuarxujlop Weight: 300 Kg

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Kljdpfxju T Ty He Aalsp Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 300 mm Saw spindle diameter: 30 mm Guide rail length: 1100 mm Miter cutting range: from –80° to +80° Bevel cutting range: from 0° to 90° Work table dimensions: 835x1175 mm Saw blade guard Power supply: 400 V Motor power: 3 kW Kjdoyhnkfepfx Aaljlp Overall dimensions: Length: 1400 mm Width: 1175 mm Height: 1600 mm

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel 28 mm - Thread cutting device Kjdjb Ennkepfx Aalolp - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - Table dimension approx. 750 x 500 mm - projection up to approx. 620 mm - Vertical stroke of the boom 600 mm - column diameter 250 mm - spindle speeds in 12 switching steps 80 - 2800 rpm - 3 feeds 0,1 + 0,15 + 0,25 mm/rev - drilling spindle drive 400 V / 5,5 kW - cooling device - space requirement approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Instruction manual

Condition: used, Year of construction: 1984, machine/vehicle number: 84043, Order No. 20218 Technical Specifications: - Drilling capacity in wood: 40 mm - Drilling capacity in steel: 18 mm - Drill spindle mount: MT 2 - Spindle stroke: 120 mm - Drill spindle speeds continuously adjustable in steps: 60 - 2840 rpm - Max. distance between table and drill spindle: 600 mm - Boom/unit tiltable left and right by 45° each Kjdpfx Aowf Iqnealolp - Boom/unit pivotable left and right - Table size: 450 x 450 mm - Drive: 400 V / 0.33 / 0.55 kW - Space required: approx. W 500 x H 1870 x D 1200 mm - Weight: approx. 150 kg

Year of construction: 1980, condition: excellent (used), max disc diameter 400mm adjustment of the cut in three angles motor power 2.2 kW Kljdpem Ucyrsfx Aalop cutting height 100 mm cutting width at 90° 850 mm

Condition: like new (used), Motor power: 3.7 kW (5 HP) Table dimensions: 1200 × 800 mm Cutting angle adjustment: 3 positions Speed: 3000 RPM Voltage: 380 V Kljdjxup Hmjpfx Aalsp

Condition: like new (used), Motor power: 3 kW Kledpsxcwgdefx Aalop Table dimensions: 2000 × 770 mm Cutting angle adjustment: 3 positions Year of manufacture: 2009 Maximum cutting height: 125 mm Maximum cutting width: 865 mm Power supply: 400 V

Condition: ready for operation (used), power: 37 kW (50.31 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 200 mm, saw blade diameter: 350 mm, height adjustment type: electric, rotational speed (max.): 3,400 rpm, chain width: 400 mm, MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Ksdpfx Aotvpfmjalslp Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Condition: used, Used Radial Ventilator available from Koreman in Maastricht, the Netherlands. Klsdpfx Ajywbwlealop

Condition: used, Ventilator Radial Ksdpfeyv Dqfjx Aalelp

Condition: like new (used), Year of construction: 2021, functionality: fully functional, System: • Hexagon Absolute Arm 8340, 7-Axis • RS6 Kit • CP-C Installed • Magnetic Base with Mounting Ring • Certified Length Standard – 1016mm (40 inch) • Leap Frog Kit Computer & Software: • Inspire Single Seat License • BendingStudio TUBE • BendingStudio CAD Wizard Kljdeymnvrepfx Aaljp

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, cutting width (max.): 400 mm, saw blade diameter: 800 mm, rotational speed (max.): 800 rpm, total length: 13,500 mm, total width: 5,400 mm, total height: 2,500 mm, cutting length (max.): 6,000 mm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Kedpfxew Nbhmo Aaljlp Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Ksdpfx Aowxmhlealelp Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice