Used Pvc for sale (944)

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 04/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Nedpfx Adjx Swwqs Newb Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: used, Year of construction: 2008, Manufacturer : CAM Model: AP Year: 2008 Type : Intermittent motion overwrapper Nodpfxex R A Dgj Ad Nswb Materials: Polipropilene, PVC, cellophane. Feeding: automatic or manual. Mechanical speed: 31 - 100 strokes / minute. Format : Length (A): 35 - 150 mm Height (B): 15 - 80 mm Width (C): 60 - 300 mm Chuck: Ø 70 - 76 mm Roll: max. Ø 320 mm Width: 100 - 400 mm  

Year of construction: 1998, condition: used, Manufacturer : Lewa Model: ecodos 750 P1 Year : 1998 Type : low pressure diaphragm metering / dosing pump   Max capacity : 750 L / H Operating pressure : 5 bars Min / max stroke : 10/0 mm Nwsdpfx Adex R Atze Nob Speed : 113 rpm   Application: sanitary/hygienic for the pharmaceutical, chemical, cosmetics and food industries. Classification: Atex (EEx) Variable speed drive Special acid coating: Stainless steel / PVC-H

Condition: refurbished (used), Year of construction: 2018, operating hours: 6,590 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-curable inks. High-performance production machine for printing on a wide range of materials using UV-curable inks. Ideal for printing on boards and sheet materials such as aluminium composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, as well as cut-to-size films. Even challenging substrates, such as heat-sensitive materials, can be printed with ease thanks to the stepless adjustment of the UV lamps, preventing excessive heat build-up. Integrated, retractable registration pins enable precise and effortless positioning of print media, making accurate series production possible. The printer features highly accurate print control, ensuring excellent repeatability when printing multiple passes (e.g., for 2.5D, relief effects or Braille lettering). Technical data: - 3 Ricoh GEN-5 printheads - Print resolution up to 1200 x 1200 dpi Nwedeyc Nt Repfx Ad Nob - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Lamp intensity continuously adjustable - Print area approx. 2500 x 1200 mm - Maximum material thickness 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum table with 4 independently adjustable vacuum zones - Ink system with 1-litre bottles - No chip recognition required (open system) - Power connection: 32A – 380 volts - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The machine is operational and can be inspected at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be offered for an additional charge (not included in the price). Year of manufacture: 2018 – Refurbished 2025* *All ink-carrying components such as ink tubes, filters, pumps, etc. have been replaced. Printheads are used but in flawless condition (see nozzle test printout). All relevant drive components checked and calibrated. €18,900 excluding RIP software €20,900 including current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,982 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-Curable Inks. High-performance production machine for printing on a variety of materials with UV-curable inks. Ideal for printing on sheet and board materials such as aluminum composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, and cut-to-size films. Even challenging materials, such as those sensitive to heat, can be printed without issue due to the stepless adjustability of the UV lamps, preventing excessive heating. Nwedpoyc Nt Dofx Ad Neb The integrated, retractable positioning marks allow for precise and easy placement of print media, enabling accurate series production. The printer features precise print control, ensuring very high accuracy for multiple print passes (e.g. 2.5D, relief, or Braille printing). Technical Data: - 3 Ricoh GEN-5 print heads - Print resolution up to 1200x1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Steplessly adjustable lamp intensity - Print area approx. 2500 x 1200 mm - Maximum material thickness: 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum system with 4 controllable vacuum zones - Ink system with 1-liter bottles - No chip required for recognition (open system) - Connection: 32A – 380 Volt - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The unit is operational and can be viewed at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be provided upon request for an additional charge (not included in the price). Year of manufacture 2019 – Completely overhauled in 2025* *All ink-carrying parts such as ink hoses, filters, pumps, etc. replaced. Print heads are used but in perfect working condition (see nozzle check printout). All relevant drive components checked and adjusted. Price: €21,900 without RIP software €23,900 with current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: ready for operation (used), Year of construction: 1998, This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine. Additional equipment • Motorized infeed table with PVC belt • Motorized loading table for manual assembly of the panels and automatic loading into the press on the 3500 mm side Nsdpjyall Refx Ad Njwb • Heating plates made of solid steel, drilled and machined on all sides • Automatic loading and unloading of the panels on the 3500 mm side Machine Benefits Technical Machine Benefits • Maximum total lifting force: 110 tons • Opening: 140 mm • Power supply: 400 volt eu / 50 hz / 3 ph. + g • Electrical boiler for thermal oil: 18 kw • Devices for adjusting the working height for flatness on all uneven floors // devices for adjusting the belt tension and centering with foot switch • Construction made of assembled and welded fe430 steel beams • Cnc-machined structures for three-dimensional parallelism • Hydraulically controlled planarity with 4 racks and pinions • Protective nets and safety devices in accordance with ce regulations • Leveling devices at the base of columns for uneven floors Extra Information Refurbished - without warranty Control panel with electric pressure gauge, buttons, and control switches Lifting hooks for transport by crane

Year of construction: 2018, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,500 mm Travel path Y-axis: 1100 mm Travel stroke of Z-axis: 655 mm Swivel angle B-axis: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm. Nwodpfex Up Uasx Ad Nsb Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Barcode scanner and label printer Swarf Conveyor made of metal Angle head for machining from below Extraction for cabin Pendulum operation through two light barrier areas Manual control console Spindle hours: about 7500 The loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg

Condition: used, his listing is for the BIOCHROM WPA Biowave II UV/Visible Spectrophotometer The unit is in full working condition and is ready for immediate use BIOCHROM WPA Biowave II UV/Visible Spectrophotometer The Biochrom WPA Biowave II is a compact, high-performance UV/Visible spectrophotometer tailored specifically for life science laboratories. It integrates advanced optics, user-friendly design, and flexible analytical capabilities, making it a go-to instrument for researchers performing nucleic acid and protein quantification, among other applications. Key Features and Benefits Wavelength Range: 190–1100 nm (UV and visible spectrum) Optical Design: Monochromator with holographic grating — novel optics with no lid or moving parts Detector: High-resolution 1024-element CCD array Light Source: Long-life Xenon lamp for energy efficiency and extended performance Display: Graphical backlit LCD for easy visualization of wavelength scans, kinetic assays (with slope calculation), and standard curves Sample Volume: As low as 10 µL with quartz cells (ideal for precious or limited samples) Cell Compartment: Designed for 10 µL volume, compatible with quartz cuvettes Data Export Options: USB interface (CSV format), integrated graphical thermal printer, or PC via Print Via Computer (PVC) software (included) Pre-Defined Methods: Nucleic acids (DNA, RNA, oligonucleotides), proteins (BCA, Biuret, Bradford, Lowry), and cell culture (cell density) Measurement Modes: Fixed wavelength (Abs/%T) Absorbance ratio Concentration (standard curve, factor) Multi-wavelength Nwedpfx Adsxl Eyqj Neb Kinetics Life science methods Cell density Scientific Applications Nucleic Acid Quantification & Purity Checking: Visual scans reveal impurities (e.g., 230 nm region for RNA) Protein Assays: BCA, Biuret, Bradford, Lowry Cell Density Measurements Kinetic Studies: Real-time monitoring of reaction rates Low Volume Samples: Ideal for precious or limited biological materials

Condition: good (used), functionality: fully functional, Characteristics: * Length: 40 m * Width: 20 m * Height (center): 10.2m * Height (side): 6 m Nedpfxewbtaye Ad Newb * PVC roof: 850 gr/m2 Description: Aluminum profile building of 800 m² with PVC roof. The building is equipped with a control cabinet, 6 electric air heating units (with temperature control), lighting and several outlets 220/380. Furthermore, there are 2 electric overhead doors. The building is demountable and can be expanded if required.

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter • Integrated control cabinet • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. Njdpfx Adjyaa Utj Nowb 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Height-adjustable for pressure control. The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: new, maximum load weight: 29,740 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2025, Equipment: ABS, Chassis * 1,150 mm fifth wheel height unloaded * Welded construction, weight-optimized from high-strength S700 steel * Side impact protection made of aluminum profiles according to ECE 73 * 2 plastic wheel chocks * Foldable underrun protection at the rear * SAF Hercules 2-speed transmission supports, full load * Aluminum ladder L = 2,840 mm * Toolbox - 165 L * Water tank - 30 L * Shovel and broom on the chassis, above the fenders * Dust bag (1 pc.) * Extendable ladder at the rear * Bellows pressure gauge * Binotto hydraulic cylinder, eye-mounted above Axles and Suspension * SAF disc axles 3x9000 kg 22.5 INTRADISC CD * 3 rigid axles * A-axle as lift axle Nwodpov U Hwtefx Ad Nob * 6x ABERG POLISHED aluminum rims 22.5x11.75 ET-120 * Tire pressure monitoring system Electrics * Aspöck LED lighting - ECOLED II * LED reversing lights - 2 pcs. * LED work lights on the side guard - 2 pcs. * 2x7-pin + 1x15-pin with EBS connection * With flashing side marker lights Body * Volume 51m3 * Front wall inclined at 20 degrees * Side walls, internal thickness 2.5 mm, fully welded * Two-wing aluminum combination door, aluminum (1/2 + 1/2) vertical with portal beam * 2 grain slides * Bottom tension locks * Pallet-width design * 5 mm floor * Floor cross member spacing 360 mm * Tension chain between the side walls * Operator's station on the chassis frame, access in FR on the left (driver's side) * PVC roll-up tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube. Center tube welded into the tarpaulin. Painting * Chassis paint RAL 7021 (black-gray) * Body paint RAL 6018 (yellow-green) * Tarpaulin color similar to RAL 3002 CARMINE RED

Condition: used, maximum load weight: 30,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 10/2025, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,100 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,780 mm, Year of construction: 2022, Equipment: ABS, Used Benalu Tipper Semi-Trailer Sidewall: Smooth-walled with hollow chamber profiles in the longitudinal direction Floor thickness (mm) 5 Sidewall thickness (mm) 3 Universal door with double lock, upper cross member Smooth-walled door leaves Continuous welds on the inside of the door Locking system: single door/swing flap - pneumatic Grain pusher, right & left Grain outlet (1 piece) Side door bracket, hook 2 bucket holders (outside) Rear stepladder, removable Hyfix Fifth wheel coupling height when loaded (mm) 1170 Nwedpfxsyc Ir Ej Ad Nob 2" kingpin BPW axles Offset (mm) 120 Disc brake Brake system, EBS Wabco EBS Anti-roll system (Anti-lock braking system) EBS control (Infocentre / Smartboard) Raising and lowering Automatic lowering when Tipping process Quick-release valve during tipping 1st lifting axle: Automatic control Tipping ram, Hyva Tipping angle: 48 degrees Aluminum drop legs Foldable steel underrun protection 24N24S + 15-pin plug connectors Rectangular taillights with bulbs 4 rear white LED work lights - 11W 1 toolbox 2 wheel chocks Insulation between steel and aluminum parts Tires: 6 x 385/65 R 22.5 Speedline satin-finished rims Tarpaulin quick-release fastener WITHOUT side straps Tarpaulin color: Metallic gray (B1070 / B2070) - PVC 650 gr/m²

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: Nwedjxaaf Dspfx Ad Njb - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Condition: used, maximum load weight: 29,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2013, loading space length: 8,700 mm, loading space width: 2,430 mm, loading space height: 2,100 mm, loading space volume: 44 m³, Year of construction: 2013, Equipment: ABS, Air suspension, tail lift, Mercedes window, EBS, aluminium drop-down supports, access ladder, PVC half-shell mudguards, foldable aluminum underrun protection (UFS), right side underrun guard (AFS), 6 mm floor, sidewalls made of aluminium hollow profiles, 5 mm front wall, overlapping rear wall, sliding device, funnel with dust bag, catwalk with ladder, PVC roll tarpaulin, load pressure gauge, 2x WZK Nedpoxvggyjfx Ad Nswb

Year of construction: 2017, condition: good (used), Assembly table for all assembly work on windows and doors. The movable and extendable work surfaces allow for absolutely safe handling of frames in all sizes as well as very large structures. Nwsdpfeycknpox Ad Njb Height-adjustable feet The height-adjustable feet ensure precise adjustment of the working surface to the desired height and perfect alignment. In addition, the table can be fixed to the floor using the pre-drilled holes. The work surfaces are covered with soft, non-slip PVC, which allows frames to rest securely. A storage shelf enables easy and organized storage of small parts for quick access and clear arrangement of tools and components. Quick-connect couplings provide easy supply of compressed air. Adaptation to any frame size is ensured by both the horizontally movable support plates and the roll-mounted, extendable support plate, allowing for a highly flexible enlargement of the working area.

Condition: used, maximum load weight: 30,020 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 07/2026, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, total width: 2,550 mm, Year of construction: 2021, Equipment: ABS, 3-Axle Carnehl Tipper Semi-Trailer 25m³ VIN: PC09034 Chassis / Attachments: * Air suspension * SAF drop-down support leg, centrally mounted * Tipping lowering function * Tyres: 385/65 R22.5 * Remaining tread depth: 1st axle ~40/30%, 2nd axle ~30%, 3rd axle ~30/50% Nodjxrwztopfx Ad Nswb * 3 x BPW axles with disc brakes * Foldable underrun protection * 1 x PVC storage box * XLite aluminium rims Body: * Carnehl thermal tipper body * Volume: approx. 25 m³ * Load pressure gauge * Sliding roof tarp * Front standing platform * Hyva front-mounted hydraulic ram * Pendulum rear tailgate * Rear tailgate with 2 mechanical hook locks Weights: * Gross vehicle weight: 35,500 kg * Payload: 30,020 kg * Unladen weight: 5,480 kg Other information: * German registration * TÜV (MOT) inspection valid until 01/2026 New main inspections, safety inspections or weight downgrades/upgrades available on request. We are happy to assist in obtaining export/temporary number plates, as well as arrange vehicle transport within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors. Subject to change, prior sale and mistakes! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the refurbishment and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge particularly excels in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on our 11,000 sqm premises. Our company philosophy is characterised by fairness and reliability. As customer satisfaction is extremely important to us, we offer our clients an excellent all-inclusive service package and provide a competent contact person to assist them throughout the purchase or sale process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to assist with the organisation of special transports. Temporary / export licence plates We are happy to assist in obtaining export/short-term registration plates. Handling customs formalities We are happy to assist you with customs clearance.

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw) Njdpoycgtbefx Ad Nswb

Year of construction: 2026, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate - new machine with 1 year warranty Nsdsx Szkhspfx Ad Nswb DELIVERY TIME APPROX. 4 MONTHS

Condition: new, Year of construction: 2026, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum Nwedpfsx Szh Hox Ad Neb · RAL color according to the customer´s choice · New machine manufactured in the EU

Condition: new, Year of construction: 2026, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor Nodpfx Aex Szbajd Nowb · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU

Year of construction: 2026, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate Nodpex Sza Asfx Ad Nowb - new machine with 1 year warranty DELIVERY TIME APPROX. 4 MONTHS

Condition: good (used), Code: 0078 Brand: FRAVOL Model: RX 300 - CE Standard Automatic edge bander with grinding unit for EVA - PUR - POLYURETHANE glue, with grinding unit for application of PVC, Abs , melamine , veneer , strip and roll edges, for joinery workshops, custom-made furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Technical data: Panel height mm 10-120 Nwodpfov Tnpnjx Ad Nsb Edge height mm 120 Panel width min mm 60 Edge thickness mm 0,4-16 Variable feed 10/20 mt/min Microprocessor control (PLC) - Touch screen 10,7 Colour Grinding unit consisting of n° 2 iPre-milling units - Motors each 2,2 Kw - Rpm 6000 IR Lamp - 0-600 degrees - Watt 600 Automatic edge loader Universal gluing unit with pre-melting Quick release Roll edge cutting Glue tank cleaning bench Two motor end trim - Motor power 0, 50 kW each - Rpm 12000 Tilting trimming unit - Motor power each Kw 1,1 - Rpm 12000 Diameter of suction mouths: n° 1 diameter mm 120 - n° 3 diameter mm 80 Fixed roller conveyor for supporting large panels Compressed air 6 bar Installed power Kw 9,4 Overall dimensions mm 4880 x 1040 x 1910 h Weight kg 1600

Condition: new, * IMMEDIATELY AVAILABLE * Includes 2x sales flaps, gas door, 100 km/h approval, 4 supports TECHNICAL DATA • Brand: Blyss • Model: BT.H15362HN • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: Not yet registered • TÜV (inspection): • 2 years from initial registration • Internal dimensions (LxWxH): 360 x 203 x 230 cm • External dimensions (LxWxH): 524 x 215 x 277 cm • Floor loading height: 55 cm • Permissible total weight: 1,500 kg • Unladen weight: 690 kg • Payload: 810 kg • Chassis: Low-loader (wheels mounted beside the body) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Robust V-drawbar, hot-dip galvanized in immersion bath • Single axle • Floor panel made of multiplex • Side walls made of sturdy 25 mm GRP sandwich panels • Sales flap on right side • PVC floor covering • Additional rear sales flap • Door in front wall, lockable from inside and outside • Step on the drawbar • Jockey wheel with clamp • 4x stabilizer supports mounted incl. crank handle Nwedpfxsyacgls Ad Nob • Maintenance-free rubber torsion axles by KNOTT • Automatic reversing system • KNOTT overrun brake and parking brake • Plastic mudguards • 13-pin connector • Reversing light • Large safety lighting units • Integrated rear fog light New vehicle with warranty and inspection (TÜV). - Financing or leasing options available - Nationwide delivery possible - Vehicle documents can be sent in advance or short-term number plates (Germany) can be provided - Export number plates incl. customs registration available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! For over 30 years, we have been authorized dealers and service workshops for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions and prior sale -

Condition: new, * IMMEDIATE AVAILABILITY * Including 1x sales hatch, aero profiles, 4 support legs TECHNICAL DATA • Brand: Blyss • Model: HB20421HT • Vehicle type: sales trailer • Vehicle condition: new vehicle • First registration: without first registration • TÜV / General Inspection: 2 years from first registration • Internal dimensions (LxWxH): 400 x 200 x 230 cm • External dimensions (LxWxH): 610 x 210 x 276 cm Nwsdpfx Adoyacgro Nsb • Floor loading height: 55 cm • Permissible total weight: 2,000 kg • Unladen weight: 840 kg • Payload: 1,160 kg • Chassis: low loader (wheels next to the body) • Tyres: 165R13C • Suspension: KNOTT rubber spring axle • Jockey wheel: Yes • 100 km/h approval: available at extra cost DESCRIPTION • Robust V-drawbar, hot-dip galvanized by immersion • Tandem axle • Multiplex floor panel • Side walls made of robust 25 mm GRP sandwich panels • Rounded corner profiles for aero look • Lockable sales hatch on the right side • PVC flooring • Door in the front wall, lockable from inside and outside • Step on the drawbar • Jockey wheel with clamping bracket • 4x scissor supports fitted including crank • Maintenance-free KNOTT rubber suspension axle • Reverse automatic system • KNOTT overrun device and parking brake • Plastic mudguards • 13-pin plug • Reversing lights • High-capacity safety lighting • Integrated rear fog lamp New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary transit plates (Germany) can be provided - Export license plates including customs declaration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! For over 30 years, we have been your specialist dealer and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, omissions and interim sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Includes 2 sales flaps, customer entrance door, 100 km/h road approval, 4 support stands TECHNICAL DATA • Brand: Blyss • Model: H25522HTN • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: None • TÜV (roadworthiness test)/main inspection: 2 years from first registration • Internal dimensions (L x W x H): 520 x 223 x 230 cm • External dimensions (L x W x H): 683 x 236 x 277 cm • Perm. gross weight: 2,500 kg • Unladen weight: 900 kg • Payload: 1,600 kg • Chassis: High loader (wheels mounted under the body) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h road approval: Yes DESCRIPTION • Robust V-drawbar, hot-dip galvanized • Single-axle • Multiplex flooring • Strong 25 mm GRP sandwich sidewalls • 2x sales flaps on right side • PVC floor covering Nwsdpfx Aoyacg Ejd Nob • Additional sales flap at rear • Door in front wall, lockable from inside and outside • Step on drawbar • Jockey wheel with clamping bracket • 4 scissor support stands mounted, incl. crank handle • Maintenance-free KNOTT rubber torsion axle • Shock absorbers incl. 100 km/h type approval • Automatic reversing system • KNOTT overrun device and parking brake • Plastic mudguards • 13-pin plug • Reversing lights • High-capacity safety lighting • Integrated rear fog light New vehicle with warranty and full roadworthiness certification. ————— - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or transit plates (Germany) can be provided. - Export license plates with customs registration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg, Germany Over 1,200 trailers immediately available from stock! For over 30 years, we are your authorised dealer and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to prior sale, errors, and changes -