Used Pvc for sale (944)

Condition: good (used), - 10 stainless steel silos - Brand: AZO - Previously used for: PVC powder - Condition: The silos have always been stored indoors and are in very good condition. Technical details: • Capacity: 12 metric tons / approximately 7.2 m³ • Each silo equipped with vibrating discharge base • Each silo equipped with discharge valve (rotary valve) • Provided with pneumatic conveying pipe Nwodpfx Adsx E U Hco Nsb Price per silo: €4,750 Ex Works, Rotterdam region Payment terms: 100% prepayment before delivery The silos are offered as is, where is, loaded onto truck Single unit purchase possible Available while stocks last The silos will be professionally dismantled by Plastima Used Machinery and partner; after dismantling, they will be ready for collection for your own transport or we can arrange shipping on behalf of Forbo. Collection/shipping can be scheduled between January 12, 2026 and February 16, 2026. If you would like to inspect the silos, we would be pleased to arrange an appointment with you.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Nsdpfxox Rx D As Ad Newb Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: excellent (used), functionality: fully functional, Offer: Screen Dies for PVC Granulation Lines We offer high-quality screen dies designed for: -production of RBS panels and other variants, -acoustic panels, gutter elements and other PVC profiles, -control of granule size in the granulation process. Available die types: -Screen dies for Royal RNH and RCG panels – specification DKT08_07 -Dies for RNR 0 acoustic panels – specification DKT01/10 -RBS dies and other variants -Injection moulds -Other production dies and accessories Nsdpfeydlt Asx Ad Nowb Features: -Made from high-grade tool steel, resistant to abrasion and high temperature -Precision screen holes -Stable and repeatable line operation -Possibility to customise die parameters and hole layouts to production requirements For detailed information about dies and products, please contact us.

Condition: used, functionality: fully functional, Moulds for PVC Profile Extrusion – WINDOW AND OTHER TYPES We offer high-quality PVC profile extrusion moulds designed for the production of: -window, door, trim, and other structural PVC elements, -interior panels, -other decorative and structural profiles. Available mould types: -Moulds for window profiles -Production lines – window, fencing profiles, trims, accessories -Other moulds for panels and profiles Features: -Made from high-grade tool steel, resistant to wear and high temperatures Nwodpfx Adsydbb Ne Neb -Stable and consistent line operation -Ability to customise mould parameters according to individual production requirements NOTE: For detailed information about the moulds and products, please contact us.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, SICA-TRS 90-500 , PLANETARY TUBE SAW PLANETARY SAW Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 100 mm Max diameter 500mm Nsdpsxwd Spofx Ad Nswb Year of construction 05-1994 Central clamp Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Year of construction: 2018, condition: used, Schüco Aluminum/PVC CNC machining center – Model RSA-VM (BJM Ing., 2018) The Schüco RSA-VM is a CNC trimming and cutting machine (Rollen Sägemaschine / Reinigungs- und Sägemaschine) designed for the precision processing of aluminum and PVC profiles used in window and door manufacturing. Main Features * Precision Cutting & Trimming: Performs accurate cutting and edge trimming of Schüco aluminum or PVC profiles. Nodpjxqmr Ejfx Ad Newb * Deburring & Cleaning: Removes burrs, weld beads, and surface residues after cutting or welding operations. * High-Quality Finishing: Ensures excellent dimensional accuracy and surface quality prior to frame assembly. * Optimized for Schüco Systems: Fully compatible with Schüco profile geometries, supporting efficient and repeatable production. Applications Ideal for use in window and façade production lines, where reliability, precision, and surface quality are essential.

Condition: used, Complete Factory Package for Processing PVC and Aluminium Profiles – Block Sale Includes the following machinery: 1️⃣ Welding and Cleaning Line – ProfteQ QUADOS Including: 4-head welding machine QUAD OS12 + transfer/cooling table + CNC corner cleaning machine FRT9 + automatic loading table 2️⃣ Machining Center – Mecal MC 304 Atlas 4-axis machine equipped with a head for frontal machining, specifically designed for aluminum processing. Nwsdpfsv Ig Hhox Ad Nob 3️⃣ Double-head cutting-off machine – FOM ALVA 500A – year 2005 Blade: Ø 500 mm – Blade inclination: external 4️⃣ Cold Saw – ALTECH GOTHA (complete with roller conveyors) Single-head ascending blade saw Ø 600 mm, blade tilting -45° / +45°, blade rotation with digital angle display. 5️⃣ Glazing Bead Cutting Machine – RobTech MAESTRO Designed for cutting aluminium and PVC glazing bead profiles with four blades positioned at 45°. 6️⃣ Single-head cutting-off machine – MG TLG 350 Blade Ø 350 mm – Table rotation: 45° - 0° - 90° 7️⃣ Two-Head Drilling Machine – FOM 8️⃣ Vertical Assembly Bench for Glass and Glazing Beads – ProfteQ BV7 + Bench – Rotox VPAH 3023 9️⃣ Assembly Table – FOM 🔟 Double-Sided Cantilever Rack – 1 Block (9 Shelves per Side) (Multiple units available). 11️⃣ Electric Forklift – Career R30N S (4 wheels) Capacity: 3,000 kg, complete with side-shift. 12️⃣ Electric Order Picker – OM XOp Capacity 1,200 kg, lifting height 6,725 mm, fork length 800 mm.

Condition: as good as new (ex-display), functionality: fully functional, type of input current: AC, SWIGRAPH - MARLON 5000 PVC Coil Forming Machine. Automatic PVC/PET forming machine for plastic coils. Coil diameter range: 6mm to 56mm Cut lengths: 7.62cm to 122cm Coil pitch: 4;1 Njdpsv Ifc Iofx Ad Nswb Power supply: 230 vac + external air supply

Condition: excellent (used), Year of construction: 2012, Double head saw for aluminim or PVC profiles PERTICI UNIVER 400IP, year 2012 Condition: excellent - Two Ø400 mm tungsten carbide saw blades - Spray mist blade lubrication system - Maximum cut between the two heads: 3500 mm - Minimum cutting capacity between two heads at 90°: 580 mm - Minimum cutting capacity between two heads at 45°: 580 mm - Hydro-pneumatic feeding of saw blades Nsdpfx Adehqb T He Njwb - Two horizontal pneumatic vices - Two vertical pneumatic vices - Two intermidiate profile support

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Nedpexu U Trofx Ad Njwb Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Nwsdpjxdciasfx Ad Njb Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 1006882, Soft PVC Coextruder Nsdpsxgh Itsfx Ad Newb

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 10061195, Soft PVC Coextruder Nwedpfx Adjxgh Imj Njb

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Nwodpfx Adjxgh H Ae Neb

Year of construction: 2001, condition: used, functionality: not functional, machine/vehicle number: (H) 96801, Micronisation installation for PVC recycling Nwsdexgh E Eepfx Ad Nob

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Nwodpfx Aexghy Njd Neb

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Nwsdpjxghxrjfx Ad Nob

Year of construction: 2009, condition: excellent (used), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering PVC, PE, PP PIPES With chip extraction fan Min. diameter 40 mm Max. diameter 400 mm Year of manufacture 2009 Accessories: Various clamp jaws Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 The machine is my property. Nwedpfsvbvznox Ad Neb

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Nwsdjx Dk H Tspfx Ad Njb Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Machine is only sold as a complete unit!

Condition: like new (used), Year of construction: 2019, Arburg 375V 500-100 Drehtisch (2019) Clamping force: 50 t Nodpfx Adjwzmdxo Nswb Screw diameter: 20 mm Type: Vertical Drive: Hydraulic PVC material

Condition: ready for operation (used), Technical characteristics 2 straight welding heads, one mobile head CN command Adjustment for heating time, hardening, welding temperature, fusion and cutting pressure ascending heating plate rapid changing in function of elements width Power and Motors Power: 4 Kw Overall dimensions Nodpfoundfwex Ad Newb

Condition: excellent (used), functionality: fully functional, Welding machine: FUSION 4H Frame discharge unit Nedpfx Asxzzxbjd Nswb First milling module Q-MATIC 1 Serial connection between welding machine and cleaning unit Rotary table Cleaning unit (second model) TRIMMER 4A Extraction table Second milling module (INTEGRA Q2) Q-MATIC 2 Line supervisor laptop

Condition: used, Year of construction: 2006, CONTAINER TYPE: 20-foot refrigerated container, Carrier, NEWLY painted in RAL 9003 with LED lighting, flat floor, small PVC fix in front of the freezer door, partition wall with freezer door - with insulating wall and door instead of the container doors. Convenient size for your goods storage, even in limited space. Suitable for indoor and outdoor use. We can manufacture any size to order. Please inquire! Original images RFBU 372782-3 RENTAL also available TECHNICAL SPECIFICATIONS: Power consumption: 380/440 V, 32 A, 50 Hz / 60 Hz with 5-pin CEE plug for land operation Interior: Made of stainless steel/aluminum, food-safe Average power consumption: 3-8 kWh Nwjdsw Agn Tepfx Ad Neb Adjustable temperature range: -25 ... +25 °C (ideal for heating and cooling) Refrigerant: R134A / R449A DIMENSIONS: External dimensions in mm: 6,058 x 2,438 x 2,591 (L x W x H) Internal dimensions in mm: 5,456 x 2,294 x 2,260 (L x W x H) TRANSPORT SOLUTION: Do you need a transport solution? We're happy to help! We deliver your container using regular trucks or crane trucks and drop it off at your location. Ask us for a quote! All refrigeration units are serviced and of excellent quality and performance. We look forward to hearing from you! BIMICON Container Service, your specialist from Hamburg BIMICON refrigerated containers & sea containers since 1996 in Germany and worldwide.

Condition: excellent (used), Year of construction: 1995, HEIN TVP 160 Pipe Saw Year of Manufacture: 1995 With chipping jaws Application: Cutting and beveling PE, PP, and PVC pipes: Smallest diameter 30 mm Largest diameter 160 mm Also suitable for short lengths starting at 10 cm Condition: The pipe saw is in working order. Nwodpfxovwm N Us Ad Neb The saw is my property. Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Year of construction: 2013, condition: good (used), SICA-TRS-SY 25-160 R, PLANETARY TUBE SAW Nwodpfx Asvn A R Nod Njb Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 25mm Max diameter 160mm Year of construction 2005 Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.