Used Pvc Twin Screw Extruder for sale (8,597)

Condition: used, Material: stainless steel Double screw: 2 nylon brushes in two sections: Ø 200 mm x 3000 mm Quick disassembly Gujdpfxezg I Tvs Ag Toh Mounted on a mobile frame: 4 wheels Power: 0,55 kw Speed controller : mechanical Support for feeders and dosing systems Overall dimensions 3800 x 550 x 1700

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Gjdpfx Agsk Nn Dzs Tsuh Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Germany

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material Gedjzylxiopfx Ag Teuh 1 Tonne per Hour

Condition: excellent (used), 1 x stainless steel 14 head multihead Screw weigher complete with twin incline feed conveyor and exit conveyor. IP65 rated. Dimple pans for sticky and awkward products. Gsdoz Ak I Uspfx Ag Teuh Model TY-P14

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Guodpjd Sg Hcefx Ag Toh Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Guodpfsiyya Aox Ag Tsh 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Gjdpfx Ajx Apcksg Touh

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Handle -extruder 600/560 Händle and Mixer MDV920b -filermixer Händle -roller mill 800x800 Händle WFZ880a Gujdpfxjzmxi Ue Ag Tjh - conveyer 40m x 80 cm gummi

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Screw diameter:60 Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use Guedpfxjifgwho Ag Tjh The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Output capacity PE: approx. 400 - 450 kg/h Guodpoifgwlofx Ag Toh Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany Gujdpfx Aoiyx Uzjg Toh More extruders available

Condition: reconditioned (used), Stock - No.: 2553 Gujdeiyynwepfx Ag Tsh 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Gsdpfx Ageyh Hc Re Teuh

Condition: reconditioned (used), Stock - No.: 2553 Gusdpfx Agoiyynde Tjh 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Gusdpfx Agozarn Es Tsh Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm Guodpeqy E Evofx Ag Tjh - Drive: Siemens motor, 95 kW - Volumetric K-Tron metering system - Degassing zone - Optionally with die head - Control system Optionally with strand granulator, water bath, etc. Inspection possible by arrangement.

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Single-screw extruder - Screw diameter: 65 mm - Refurbished Guodpfjhgq Ahsx Ag Teh - Degassing zones - Filter/screen changer - Die installed Data sheet, see photos. Optionally available with water bath & strand granulator, etc. If you have any further questions, please do not hesitate to contact us. Commissioning and testing can be arranged. Available for immediate delivery.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min Gujdjz R T Akjpfx Ag Teh • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION Gujdswivdkjpfx Ag Toh

Condition: used, Double Paddle Mixer Guedsym Ui Eepfx Ag Teh Inside dimensions: 1000 mm x 750 mm x 650 mm Total dimensions: 1500 mm x 1040 mm x 1770 mm In good working condition Fully Stainless Steel

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Gujdpoym U Syjfx Ag Toh Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for rigid PVC Suitable for HFFR formulations Suitable for elastomer compounds for low-, medium-, and high-voltage cables TECHNICAL DETAILS Screw diameter: 200 mm Length from feed inlet to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed inlet height: approx. 1,000 mm Gusdoz Ngaxspfx Ag Tsh EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 3,000 rpm, saw blade diameter: 200 mm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Gusdpfx Agoyrmzqo Tsh Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: new, functionality: fully functional, Equipment: documentation/manual, FOLIE DEKORACYJNE PVC 3D DO FRONTÓW MEBLOWYCH I MDF – 50 ROLEK Na sprzedaż zapas magazynowy folii dekoracyjnych PVC 3D producentów RENOLIT, BONLEX, ALKOREN i EUROVINYL. Oferta obejmuje 50 rolek o szacunkowej łącznej powierzchni około 14 000–15 000 m². Folie przeznaczone do oklejania frontów meblowych i kuchennych, płyt MDF oraz elementów profilowanych, z wykorzystaniem technologii prasowania membranowego lub próżniowego. Przydatność konkretnego dekoru do danego procesu należy potwierdzić na podstawie jego specyfikacji. W zestawie znajdują się różne kolory i dekory, w wykończeniu matowym, supermatowym oraz w wysokim połysku. Oferta skierowana do producentów mebli i frontów MDF, zakładów stolarskich oraz dystrybutorów materiałów meblowych. ZESTAWIENIE DOSTĘPNYCH FOLII • RENOLIT Graphite Supermatt Classic 16 rolek – szacunkowa powierzchnia 5 301 m². • RENOLIT Conifer Green Supermatt PF (V1238) 10 rolek – szacunkowa powierzchnia 3 278 m². • BONLEX Grigio Scuro HG 8 rolek – szacunkowa powierzchnia 2 160 m². Guedpfx Asz I Rmrog Tsh • BONLEX Canadian Ivory 2 rolki – szacunkowa powierzchnia 576 m². • RENOLIT Reed Green Premier Matt Protected 1 rolka – szacunkowa powierzchnia 256 m². • RENOLIT Tobacco Ash SC Premier 1 rolka – powierzchnia do potwierdzenia. • ALKOREN Peperoncino Rosso HG 1 rolka – szacunkowa powierzchnia 270 m². • EUROVINYL HFL 4090 1 rolka – szacunkowa powierzchnia 227 m². • Pozostałe folie – różne niezidentyfikowane dekory 10 rolek – szacunkowa powierzchnia około 2 300–2 800 m². Trzy największe partie: Graphite Supermatt Classic, Conifer Green Supermatt PF oraz Grigio Scuro HG obejmują łącznie 34 rolki. CENA I WARUNKI SPRZEDAŻY Cena ofertowa całego zapasu: 34 000 EUR netto. Preferowana sprzedaż wszystkich 50 rolek jednemu nabywcy. Zakup wybranych większych partii możliwy po indywidualnym uzgodnieniu. Cena pakietowa dotyczy wyłącznie zakupu i odbioru całości; ceny poszczególnych dekorów ustalane są oddzielnie. Zapas dostępny do szybkiego odbioru. Podane powierzchnie są orientacyjne. Dokładne ilości oraz dostępność poszczególnych dekorów wymagają potwierdzenia przed zakupem. Na życzenie udostępnimy dodatkowe zdjęcia rolek i etykiet oraz szczegółowe zestawienie dostępnych folii. Numer referencyjny oferty: PVC-3D-50.

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR210 ± 120L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 15 Kw - 970 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 300L Single mixing shaft execution with adjustable paddles Gujdpfx Aoz Rl Ecsg Tjh Motor 3 Kw Extruder BR210 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm without electric cabinet and controls