Used Kdr 310 St for sale (16,552)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WJME2NNH60C286475, mileage: 306,184 km, first registration: 05/2014, fuel type: diesel, overall weight: 26,000 kg, tire size: 385/65, axle configuration: 6x2, fuel: diesel, color: white, suspension: air, total length: 9,200 mm, total width: 2,550 mm, total height: 3,850 mm, loading space volume: 22 m³, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, onboard computer, tachograph, The subject of this advertisement is an IVECO Stralis 310 garbage truck with a Stummer Super Titan body. First registration: 2014-05-28 Power: 310 hp Engine capacity: 8710 cm3 Fuel: Diesel Hjdpfozt N S Hjx Ap Eefn Mileage: 306,184 km VIN: WJME2NNH60C286475 Number of axles: 3 Drive: 6×2 Tire size I, II, III: 385/65, 315/80, 385/65 Wheelbase I-II: 4.20 m Wheelbase II-III: 1.35 m Gearbox: automatic Suspension: air suspension GVWR: 26,000 kg Curb weight: 16,825 kg Length: 10.20 m Width: 2.55 m Height: 3.85 m Body: Model: SUMMER SUPER-TITAN 2014 Capacity: 22 m³ Equipment: ABS central locking electric windows electric mirrors hydraulic power steering engine brake hydraulics immobilizer on-board computer manual air conditioning dual wheels reversing camera sun visor speed limiter adjustable suspension factory radio toolbox reversing signal rotating lights tachograph cruise control multifunction steering wheel OUR SERVICES We provide: Preparation of documentation for registration and customs clearance (including EUR.1 and T1) Transport of the vehicle to any location worldwide Vehicle service after purchase Repairs and maintenance of equipment purchased from us Upon customer request: Oil and filter changes in the vehicle and body. *Comprehensive service and support at every stage of the process. *Possibility of leasing older vehicles, even those up to 18 years old. *If you would like to know more, please contact us.

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Hedpfxez Ipi So Ap Eofn Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: used, AD thickness planer KDR STÖ310, year 1994, incl. transport unit, 2.2 kW, 1270 mm table length, 310 mm table width, 3 knives, 250 kg Hedpox H Uddefx Ap Esfn Price changes reserved, subject to errors, misprints and typographical mistakes.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Hsdpfx Apozrtn No Esfn Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Hfedpfezrtpmjx Ap Ejn Soundproof cabin. 2 sets of tools. Technical documentation.

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Hedpfx Asziphajp Eefn

Condition: used, Year of construction: 2016, operating hours: 2,170 h, functionality: fully functional, input voltage: 400 V, total width: 3,880 mm, total length: 3,100 mm, input current: 160 A, Equipment: documentation/manual, MGM Omnicut Star 3100 CNC plasma cutting system Manufacturer: MGM Model: Omnicut Star 3100 Year of manufacture: 2016 Operating hours: approx. 2,100 h For sale is a well-maintained MGM Omnicut Star 3100 CNC plasma cutting system from 2016 with only approximately 2,100 operating hours. The machine is in good technical condition and is ready for immediate use. Equipment: Hodpfxjzpwcfo Ap Esfn CNC plasma cutting system MGM Omnicut Star 3100 Year of manufacture 2016 Approx. 2,100 operating hours Plasma source: Kjellberg HiFocus 161i neo Additional oxy-fuel torch for economical oxy-fuel cutting Precise machining of steel, stainless steel and aluminum Robust machine construction for industrial use The combination of the powerful Kjellberg HiFocus 161i neo and the oxy-fuel torch enables both highly precise plasma cuts and the economical cutting of larger material thicknesses. Note regarding the sale: We offer this machine on behalf of a client and act solely as an intermediary. The sale is made directly by the machine's owner. We will gladly facilitate contact and assist you with the entire process. An inspection of the machine is possible at any time by prior appointment. We will gladly provide further technical data, images and information on the equipment upon request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,950 kg, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2006. This DMG GILDEMEISTER CTX 310 features a maximum spindle speed of 6000 rpm and a tool turret with 12 stations. With a power capacity of 24 kVA, this machine is designed for efficient performance. If you are looking to get high-quality turning capabilities, consider the DMG GILDEMEISTER CTX 310 machine we have for sale. Contact us for further details. - Total Power On Hours (Counter 1): 21887.4 h- Spindle/Run Hours (Counter 2): 11066.2 h- Power Capacity: 24 kVA- Max Current: 35 A (Jn max) / 38 A- Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 24 V Hfsdpfx Apozh E Ako Eon Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total width: 1,200 mm, total height: 2,100 mm, total length: 1,700 mm, overall weight: 310 kg, inner dimension width: 740 mm, inner dimension length: 1,000 mm, inner dimension height: 770 mm, Equipment: lighting, Auer ST 1000 J Blasting Cabinet / Blasting System – Year of Manufacture 2003 Technical Data: Manufacturer: Paul Auer GmbH Model: ST 1000 J Year of Manufacture: 2003 Machine Number: 3440 Blasting Chamber: approx. 1,000 × 770 × 740 mm External Dimensions: approx. 1,700 × 2,100 × 900 mm Load Capacity of Working Grate: 200 kg Blasting Gun: SPA 80 Hedpjz Drfuofx Ap Ejfn Air Nozzle: 4.0 mm Blasting Nozzle: 11.0 mm Compressed Air Consumption: approx. 0.73 m³/min at 4 bar Electrical Power: 1.0 kW Weight: approx. 310 kg

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. Hjdsylt Ukepfx Ap Eefn - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Hfjdpeyg Eu Sefx Ap Een Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07-02461, measuring range X-axis: 250 mm, measuring range Z-axis: 310 mm, total width: 390 mm, total length: 430 mm, total height: 805 mm, input voltage: 230 V, overall weight: 80 kg, input frequency: 50 Hz, For sale is a tool presetting machine from the Swiss quality brand PWB Swiss. The machine is in used condition, and the optics and measuring electronics are functioning. Extensive VDI accessory package included: The machine is sold with a used set of reduction adapters (ideal for CNC turning operations): 1x VDI 30 mount 2x VDI 20 mount (in two different heights) 1x VDI 16 mount Technical data: Measuring travel X-axis (longitudinal travel): 250 mm Measuring travel Z-axis (vertical travel): 310 mm Base spindle mount: SK 40 Weight: approx. 80 kg Important notes regarding the sale: A test report or a printed manual is no longer available. The machine is sold in its current condition, as inspected (uncleaned). An on-site inspection with the machine powered on is highly recommended. Hsdpfjzy Uqhex Ap Esfn Sales conditions: Price: €1,573 negotiable (plus VAT) Invoice: A proper invoice with VAT will be issued. Shipping: Self-collection only. Assistance can be provided with loading.

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Hfsdezmtldepfx Ap Een Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: 6 pieces diameter 180 mm. / inside 40 mm. 2 pieces - 260 mm. / 45 mm. Hedou U Rayopfx Ap Ejfn 6 pieces - 260 mm. / 90 mm. 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Hfodpfezz Ipmjx Ap Esn Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Hsdpfev U Ag Dox Ap Esfn Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock.

Condition: used, mileage: 139,000 km, power: 77 kW (104.69 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,140 kg, next inspection (TÜV): 08/2026, color: red, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Body/structure: Panel van double cab standard, LED cargo area lighting Additional features: 3rd brake light, overhead storage compartment in cab, driver’s airbag, traction control system (ASR), audio system: radio/CD player with multi-function display, electrically adjustable and heated exterior mirrors, integrated indicator lights in exterior mirrors, rubber flooring in cargo/passenger area (fully covered), onboard computer, headliner in passenger area, tachometer, electronic brakeforce distribution (EBD), electronic differential lock (EDS), driver assistance system: hill start assist, driver assistance system: emergency brake assist, sliding window in cargo/passenger area: 1st row left, sliding window in cargo/passenger area: 1st row right, 165 A alternator, grab handle B-pillar, rear wing doors without glazing (180-degree opening angle), heater with recirculation function, interior filter: pollen filter, Isofix child seat fixtures, body/structure: high-roof panel van, body variant: medium-high roof, silver radiator grille, partition wall behind 2nd seat row, steering column (steering wheel) adjustable in height and reach, headlight range adjustment, truck registration, engine 2.0 litre – 77 kW TDCi CAT, front and rear parking sensors, manufacturing location: Otosan, wheelbase 3300 mm, full wheel covers, spare wheel matching tire size, low-emission according to Euro 6 emissions standard, right-side sliding door in cargo/passenger area, wide side protective moldings (body cladding), seat package 13: driver's seat (4-way adjustable) – double passenger seat, fabric, seats in cargo/passenger area: 1st row, 3-seat bench, partially painted bumpers, Trend trim, integrated rear step, tinted glazing, half-height trim in cargo/passenger area, second folding remote key. The vehicle is in good condition. Hodoz R Awvepfx Ap Eefn New TÜV and emissions test available at an additional cost!

Condition: like new (used), Year of construction: 2014, operating hours: 2,808 h, functionality: fully functional, input voltage: 400 V, overall weight: 3,760 kg, intake manifold diameter: 200 mm, noise level: 75 dB, actuation type: manual, The machine is in like-new condition. It has only 2,880 operating hours. It can also be inspected while in operation. Hfedpsz R Uf Hjfx Ap Een

Condition: used, Year of construction: 2014, functionality: fully functional, overall weight: 840 kg, Specification: Protection class: IP54 Control voltage: 24V DC Fuse: 16A Power: 0.5kW Dimensions: L: 130cm W: 90cm H: 255cm Hfedpfxewq Sc Ej Ap Ejn The hydropneumatic press from Tox Pressotechnik is an innovative and versatile solution for demanding manufacturing processes. It combines the advantages of hydraulic power with pneumatic control to ensure precise and even force transmission. The press is characterized by its high flexibility, making it suitable for a wide variety of applications such as forming, joining, or precision work. Thanks to its robust construction, it is durable and low-maintenance, making operation reliable and efficient.

Condition: excellent (used), mileage: 932,527 km, power: 228 kW (309.99 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 10,300 mm, total width: 2,600 mm, Year of construction: 2012, WJME2NNH404393034 Cool unit brand: Carrier = More information = Hedpfx Aeymqggjp Ejfn Technical information Number of cylinders: 6 Engine capacity: 7.790 cc Rear axle 1: Lift axle Weights Empty weight: 11.820 kg Carrying capacity: 15.180 kg GVW: 27.000 kg Functional Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good Identification Registration number: BZ-XL-87 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Hfodpfx Apjv Sy Sfs Esn Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: used, mileage: 138,000 km, power: 96 kW (130.52 HP), first registration: 02/2018, fuel type: diesel, overall weight: 3,140 kg, next inspection (TÜV): 02/2027, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Hfsdpfx Aoz Sv Uqjp Ejn Trailer Stability Assist (TSA), LED cargo area light, metallic paint, Visibility Package 2, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors, interior trim in the cargo/passenger compartment: high, interior trim in the cargo/passenger compartment: hardboard Additional equipment: 3rd brake light, storage compartment in the headliner of the cab, driver's airbag, Anti-Slip Regulation (ASR), audio system: radio/CD player with multi-function display, audio/radio remote control on the steering wheel, mobile phone/cell phone preparation with Bluetooth/USB interface, AUX-IN connection, USB interface, electrically adjustable and heated exterior mirrors, turn signal integrated into exterior mirror, floor covering: vinyl in the cargo/passenger area, on-board computer, tachometer, electronic brake force distribution (EBD), electronic differential lock (EDS), generator 165 A, grab handle B-pillar, rear wing doors without glazing (opening angle 180 degrees), heater with recirculation mode, interior filter: pollen filter, body/superstructure: high-roof van, body variant: medium-high roof, radiator grille silver, cargo area partition high behind driver and passenger, steering column (steering wheel) adjustable in height/length, headlight range adjustment, truck registration, engine 2.0 L - 96 kW TDCi CAT, parking pilot system front and rear, production plant: Otosan, wheelbase 3750 mm, wheel covers, spare wheel in driving condition, low emissions according to emission standard Euro 6, sliding door cargo/passenger area right, wide side protection strips (side paneling), seat package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, seat cover/upholstery: fabric, seats in the cab: driver's seat adjustable in height, seats in the cab: passenger double seat, seats in the cab: driver's seat with lumbar support, folding table integrated in passenger double seat, storage compartments under seat bench, bumper partially painted, Trend, integrated rear step, tinted glazing, second key with folding remote control Equipment: navigation system * Power steering * Partition * Central locking Speed regulation: cruise control Air conditioning: air conditioning Safety: ABS * ESP Towing capacity: 2540 KG Payload: 885 KG Only 1 vehicle key The vehicle is in very good condition!

Condition: excellent (used), mileage: 971,464 km, power: 310 kW (421.48 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, suspension: other, loading space length: 8,050 mm, loading space width: 2,460 mm, loading space height: 3,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electric window regulation, fog lights, parking heater, retarder, spoiler, = Additional options and accessories = - Aluminum fuel tank - Intarder - Radio/CD player - Reinforced engine brake - Roof Spoiler - Sun visor = Remarks = Tail lift: Yes TRANSPORT TO ANTWERP 590 EURO = More information = Hfedpezw Hd Iofx Ap Ejn Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Empty weight: 9.830 kg Carrying capacity: 9.170 kg GVW: 19.000 kg Technical condition: very good Visual appearance: very good

Condition: used, axle configuration: 3 axles, first registration: 10/2012, color: other, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes = Remarks = LAG O-3-39 CD2, Hfodpfx Apjz R T S Es Een 2012, SAF axles with sliding brakes, LAGRAM dry materials stainless steel vacuum tank, 13450 Liters, Kipper = More information = Tipper: Back Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Maximum wall thickness: 8 mm Outer diameter of solid material: up to 70 mm Hsdpfx Apsz Im Rae Ejfn Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg