Used Products for sale (17,240)

Year of construction: 1980, condition: used, Rolling mill in working condition, designed for the production of hot-rolled metal products: reinforcing bars, rounds, squares, angles, flats, channels, and beams. Maximum initial blank diameter: 180 mm. Ksdez Eq Nujpfx Aarenc It consists of a three-roll roughing stand with a diameter of 600 mm and five finishing stands with a diameter of 320 mm, as well as a calibrating three-roll stand with a diameter of 320 mm. High productivity. Cantilever-type rolling rolls are used. They are inexpensive to manufacture and can be quickly replaced when switching from one type of rolled product to another. Location: Ukraine, Sumy. Dismantling and loading are included in the price.

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Kedpfx Aaoz Elvpersnc Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar Ksdjz Ht Ebopfx Aarjnc

Year of construction: 2023, condition: like new (used), functionality: fully functional, ESCO Airstream Gen 3 Vertical Laminar Flow Cabinet Type: LVG-3AG-F8 Airstream Gen 3 Vertical Laminar Flow Cabinet While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet. Knedpfxez D Tkfe Aarec The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream Gen 3 Vertical Laminar Flow Cabinet. Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment

Year of construction: 2026, condition: new, Complete roll forming line for solar C profile production with punching, width adjustment and turnkey automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This Solar C Profile Production Line is designed for the manufacturing of high-quality C profiles used in solar mounting structures and renewable energy projects. The system provides a complete turnkey solution from coil feeding to finished profile output. Engineered for precision, durability and production flexibility, the line ensures stable operation, accurate punching, consistent forming quality and long-term industrial performance. ⚙️ PRODUCTION RANGE The system can produce different C profile sizes according to project requirements: Web Width: 80 – 200 mm Flange: 40 – 60 mm Lip: 20 – 25 mm Material Thickness: 3 – 4 mm Custom profile dimensions are available upon request. 🔧 LINE CONFIGURATION The production line consists of: Hydraulic Coil Loading Car Hydraulic Decoiler Pinching Unit Straightener & Welding Station Servo Feeder 40 Ton Punch Press Roll Forming Machine Hydraulic Fix Type Shear Conveyor System Optional Automatic Stacking System ⚙️ ENGINEERING FEATURES Servo-controlled feeding system for accurate punching positions Programmable feeding with multi-job memory High precision punching and forming process Roll forming machine with NC width adjustment Hardened rollers for long service life Heavy-duty machine frame for continuous production PLC & HMI controlled automation system ⚡ OPERATIONAL ADVANTAGES Complete turnkey solar profile solution Flexible production for multiple profile sizes High product consistency and repeatability Reduced labor and improved efficiency Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Solar mounting systems Solar farm structures Renewable energy projects Steel support profile production Infrastructure projects 🧩 OPTIONAL CONFIGURATIONS Automatic stacking system Different profile dimensions Tooling for customized hole patterns Automation upgrades Turnkey factory integration solutions 📸 REFERENCE PROJECTS Kodey Any Rjpfx Aarsnc Images included in this listing show reference installations of similar solar profile production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Knodoz Nir Rspfx Aarsc Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: new, (made by N & N) new ! all stainless steel capacity 300 L. (= ± 10CF) 3 x 400V, 5,5kW double Ribbon mixing arm dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid Knsdpfx Asz Nhnksaroc CE-approved adjustable speed 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: spices, ingredients, powders,…

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1235, TECHNICAL DETAILS Production speed: max. 150 bags/min Ksdpfx Aajz Ng A Hsrjnc MACHINE DETAILS Connected power: approx. 45 kW Operating voltage: 380–400 V Frequency: 50–60 Hz EQUIPMENT CE marking

Condition: good (used), Year of construction: 2011, machine/vehicle number: A05B-2551-B280, Fanuc LR mate in very good condition. It was removed from an injection moulding process where it loaded the the plastic blanks prior to forming and was only in production for 5 yrs. it comes with the robust R30iA controller which has ethernet connectivity to connect to your PLC or can be configured to work as a stand alone unit Knedpfjtiy Sgsx Aaroc

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: Delta MACHINERY, We offer this operational DELTA CHA 02 E pallet manufacturing machine, produced in 2002. Manufacturer: DELTA Model: CHA 02 E Year of manufacture: 2002 Condition: operational / in working order and installed Type: Delta pallet production machine / pallet nailing machine Kedpfx Aaoy H D Dyoronc If you have any further questions or require more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2018, Biscuit line Capacity - 250-300kg/h Year - 2018 Kodpfx Aasw Nxvujrenc Dough mixer 100kg batch, Biscuit rotary moulder 800mm width, Tunnel oven, wire mesh belt 500mm width, 18m baking zone, 1.5m inlet conveyer and 1.5m outlet conveyer, total 21m, electric, 4 temperature controlled zones with separate control for upper and lower zone, automatic controlled tracking of the belt

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Gas filling press: Models and triple available Knodowikn Rjpfx Aarsc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Kodpfx Aaoxur Hieronc Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Condition: good (used), overall weight: 4,800 kg, Used for steaming pasta and other food products. Excellent condition, available for immediate loading. Kodpfx Ajxxd Imjaronc

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Kjdjwpunbepfx Aaronc Filling nozzle - 25mm diameter.

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Kodpfx Aswv Trljarjnc Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: excellent (used), Year of construction: 2002, Manufacturer - OMES Capacity - 1400 pallets/shift Knsdpfxswwiv Aj Aaroc Year - 2002 Line currently dismantled

Condition: used, HESS RH500 1998r control panel 2 moulds Knedpfxjyx Hx Re Aarjc hydraulics conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, Concrete paver production for slabs complete production line Knjdpfxey Sinno Aaroc fully automatic rotary table topping press Uni 2000/600/7 fully automatic direct washing system Weser 100/2 molds electrical system/control including pallet production

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Jaws: 250mm x 150mm Up to 30 programmable products Knedpewd Sh Ujfx Aaroc Price € 5,950

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Knsdpeyaiafjfx Aarec Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz Knodpfx Aez Rl D Searec 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 710 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 3,050 mm, total length: 10,145 mm, total width: 9,850 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,600 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 15 bar, spindle motor power: 30 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak FH 5800 with the Mazak Palletech system. This machine was manufactured in 2001 and is fitted with the Mazatrol Fusion 640M control system. It is a robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. The Mazak Palletech automation system enables more efficient and unmanned production. Technical specifications: Kjdpfx Aaoz Rmq Tjrsnc Table dimensions: 500 x 500 mm Number of pallets: 10 Table load capacity: 500 kg X-axis travel: 710 mm Y-axis travel: 610 mm Z-axis travel: 660 mm Table indexing: 360° in 1° increments Spindle mount: DIN 69871A/40 Spindle speed: 35 – 15,000 rpm Spindle motor: 30/22 kW Magazine capacity: 120 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: like new (used), functionality: fully functional, fuel type: diesel, overall weight: 30,000 kg, Year of construction: 2026, Omega SC4815 Scalper The Omega SC4815 is a heavy-duty tracked scalping screen designed for demanding quarrying, recycling and construction applications. Built around a high-energy 16' × 5' twin-deck screen box, the SC4815 combines aggressive screening performance with high throughput, robust construction and excellent on-site mobility. Kedsz Dbccepfx Aarsnc Capable of processing up to 450 tonnes per hour, the SC4815 features a 7 m³ feed hopper, 1,200 mm belt feeder and three product discharge conveyors for oversize, mid-size and fines. Its hydraulically folding conveyors and walkways allow for fast setup and straightforward transport between sites. Powered by a CAT 3.6 engine, the machine uses a fuel-efficient diesel-hydraulic drive system and is mounted on a heavy-duty tracked undercarriage. At approximately 30,000 kg, the SC4815 is engineered to handle tough materials while remaining practical to transport and manoeuvre on site. Key specifications: 16' × 5' twin-deck screen | Up to 450 TPH | 7 m³ hopper | CAT 3.6 engine or Deutz engine Three-way material split | 30,000 kg operating weight. Omega SC4815 — built for high production, efficient screening and demanding working environments.

Condition: used, Veolia Water System, Model - Orion 2000 Orion™ is a skid-mounted, multi-technology purified water production system. Offering softening, reverse osmosis and continuous electrodeionization (CEDI) technologies that can be fully or partially hot water sanitized. Ideal for use as a pharmaceutical water system for the generation of purified water. Orion is digitally-enabled to offer the ability to remotely monitor any parameters you want. Ksdpfjz Ic T Rex Aarenc