Used Pressing Cushion for sale (12,310)

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours Ksdpfeyupulsx Aalslp - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Double-column hydraulic press NEFF Type RHS 125 Z Hydraulic drawing press Machine No. 3973 Year of manufacture 1983 Pressing force: 125 tons Column gap: 1050 mm Lateral column clearance: 550 mm Table size: 1000 x 800 mm Ram size: 1000 x 800 mm Ram stroke: 350 mm Installation height max.: 750 mm Table height above floor: 960 mm Blankholder force: approx. 12 tons at 105 bar Blankholder stroke: 100 mm Through-hole in table: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Klodeguvtlspfx Aalep Rapid advance speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - Hydraulic blankholder cushion underneath the table with a through-bore in the table top Ø 202 mm - Precise 4-column guide on the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable fixed stop via hydraulic motor - Cutting shock damping - Two-hand control panel for stroke release on the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating instructions, electrical wiring diagram, and PLC program printout available Required space L x W x H: 2600 x 2400 x 4270 mm Weight: approx. 14 tons Good condition

Year of construction: 2000, condition: ready for operation (used), Columbus C S Contura Klsdpfevg Inkjx Aalsp Permanently elastic press cushion for every veneer press 2200 x 1000 mm

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Kledpfxsxvy Hmo Aalep

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, cylinder diameter: 85 mm, working width: 1,400 mm, number of cylinders: 10, working length: 4,000 mm, TECHNICAL DETAILS Max. working length: 4,000 mm Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm Kledpjyqybhjfx Aalsp MACHINE DETAILS Heating system: Oil EQUIPMENT System with pre-feed conveyor belt System with outfeed table Safety standard: CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13350686, pressing force: 400 t, stroke length: 150 mm, power: 7.5 kW (10.20 HP), number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Pressing force: 400 t Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Number of cylinders: 10 Cylinder diameter: 120 mm Plate material: Aluminium (solid) Plate thickness top and bottom: 90 mm MACHINE DETAILS Power: 7.5 kW Voltage: 380 V Dimensions & Weight Transport dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Total weight: 25,000 kg EQUIPMENT Infeed and outfeed conveyor Oil heated Kodpoyuxh Uefx Aalelp Oil boiler

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 4712, pressing force: 120 t, cylinder diameter: 90 mm, number of cylinders: 6, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min EQUIPMENT Klodsyuxh Iepfx Aalop Complete line with: Loading system Gluing machine Destacker High-frequency cabinet (offered separately)

Condition: ready for operation (used), Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Klsdpfx Aeytcd Rjaljp Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, pressing force: 60 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale weight: 550 kg, overall weight: 2,450 kg, The machine is in mint condition! TECHNICAL DETAILS Pressing force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Theoretical pressing output (idle): 32.5 m³/h Filling height: 1,115 mm Filling opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Maximum bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, die-cut waste Kodpeyqw Sqofx Aaljlp MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Feeding type: Manual Consumables: Wire, loop wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg FEATURES HSM TCS (Torsion Control System) for press plate tilt monitoring Automatic start of pressing process Specifications, information and technical data as provided by the manufacturer. Therefore, no guarantee given by the seller for their accuracy.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, We offer this very good RYOBI 522HE offset printing press, year of construction 2004. Semi auto plate loading, One owner from new. Very clean machine. Kedpfeywaq Rex Aalolp If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2003, Haco 6m x 225ton CNC Pressbrake Great working condition 6m capacity x 225ton 2 Axis Year 2003 Light Guards Kodpfxsyv Dc Ij Aalelp

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESA, controller model: S660W, bending force (max.): 175 t, working width: 3,700 mm, stroke length: 210 mm, throat depth: 410 mm, distance between stands: 3,200 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, number of axes: 4, type of crowning: motor-driven, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, overall weight: 9,800 kg, total length: 5,305 mm, total width: 2,430 mm, total height: 2,840 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, 2021 MVD A175-3700 Hydraulic Pressbrake with ESA S660W Graphic Control – Very Good Condition For sale is a 2021 MVD A175-3700 Hydraulic CNC Pressbrake, equipped with the advanced ESA S660W Graphic CNC Control. This machine is in very good condition, and is ready for immediate use in production. MVD are globally recognised for their high-precision sheet metal forming machinery, combining durability with operator-friendly CNC controls. The A175-3700 offers exceptional performance for fabricators, subcontractors, and manufacturing companies needing reliable and accurate bending of sheet materials. Machine Make: MVD Machine Model: A175-3100 Machine Type: CNC Pressbrake Machine Capacity: 3700 x 175T Machine Year: 2021 Machine Control: ESA S660W CNC Graphic Control ✅ Key Features 175-ton hydraulic pressbrake with 3700 mm bending length ESA S660W Graphic CNC Control – intuitive 2D/3D programming, touchscreen interface 4-axis CNC (Y1, Y2, X, R) for flexible production High precision crowning system for consistent bending angle Kedpfxjxddw Ee Aalslp Heavy-duty welded steel frame for stability and long-term accuracy European-style tooling system – quick and easy tool changes Safety light guards for operator protection Excellent condition – 2021 model, lightly used 📐 Technical Specifications – MVD A175-3700 Press Capacity: 175 tonnes Bending Length: 3700 mm Distance Between Frames: 3200 mm Stroke (Ram Travel): 210 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Width: 90 mm Axis Configuration: Y1, Y2, X, R (4-axis CNC) Control: ESA S660W Graphic CNC – touchscreen with 2D/3D programming Backgauge Travel: 750 mm Approach Speed: 180 mm/s Bending Speed: 10 mm/s Return Speed: 130 mm/s Main Motor Power: 15 kW Machine Dimensions (L×W×H): 5305 × 2430 × 2840 mm Weight: 9,800 kg 🌍 Condition Year of Manufacture: 2021 Control: ESA S660W Graphic CNC Axes: 4-axis (Y1, Y2, X, R) Condition: Very Good Ready for inspection and delivery 🔑 Summary This 2021 MVD A175-3700 Hydraulic CNC Pressbrake with ESA S660W Graphic Control offers 175 tonnes of power, 3700 mm bending capacity, and advanced multi-axis CNC control for accurate and repeatable bending. An ideal choice for workshops and production facilities requiring a reliable, modern, and precise pressbrake. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Trumatic Laser punch press for sale fully operational, call for inquiries Kljdpfx Aaoyryqrolsp

Condition: excellent (used), selection of AMADA PROMECAM press brakes for sale ranging from 50 tonne plus call or email for inquiries Ksdjyryqlepfx Aalelp

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Kljdpfx Aaov Sq Rlelop Force Feeder with a 0.9KW motor Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Customer to arrange collection and freight

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Kedefuangopfx Aalolp Cylinder remover by home plate

Condition: used, Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake PRESS BRAKE HYDRAULIC CAPACITY: 80 TONS BENDING LENGTH: 2500mm CONTROL: OPERATEUR Klodpfxjfuaqms Aaljp NO OF AXIS: 7 FRONT GUARDS ERWIN SICK MACHINE MOUNTED SIDE AND REAR INTERLOCKEDFENCING

Condition: new, Sheet metal forms Sheet metal forms Deep drawing moulds Hot aluminium & steel forging Automotive and spare parts Food packaging industry Electrical panels Industrial cooling white goods Construction & building Hair metal cutting dies Product Info: No pit required Steel construction body C-Channel home plate & ram Klsdpfx Aajfuam Ujlep Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: new, Sheet metal cutting dies Sheet metal cutting dies Sheet metal forming moulds Hot forged brass Deep drawing moulds Cold forged aluminium steel Automotive and spare parts White goods Industrial kitchen parts Industrial cooling parts Kitchen appliances Kjdpfjfuam Rjx Aalslp Construction & building Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: used, Grindermak 150-06 Grindermak 150-06 New Punch press tool grinder based on the Amada Togu CNC grinder Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. Kedpjfuakcefx Aalslp In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/

Condition: used, Automatic High Quality Grinding Automatic High Quality Grinding Machine Type : Other All punch operators know the importance of tool maintenance on part quality and tool life. The AMADA TOGU is the solution; an automatic tool grinder design specifically for high quality grinding of sheet metal tooling. Unmanned operation Simple operator control Quick, reliable grinding of all standard tooling Supplied with jigs for shear angle grinding Restores tooling to optimum condition resulting in high quality parts Enables regular regrinding to maximise tool life USED AMADA AUTOMATIC TOOL GRINDER MODEL TOGU-III MACHINE SPECIFICATIONS Model ……………. TOGU-III Max. Diameter Tool Size ……………. 6.30 Max. Grinding …………… .039” Main Axis Motor …………… 2 H.P. 2 P Main Axis Rotation Speed ………….. 3000R.P.M. (60Hz) Main Axis Travel …………… 9.45” Main Axis Feed Motor …………….. DC Servo Motor (0.05 H.P.) Main Axis Feed Speed-High ………… 23.6 I.P.M. Main Axis Feed Speed-Middle ………. 2.36 I.P.M. Main Axis Feed Speed-Low …………. 0.002 I.P.M. Table Motor ……………. 0.134 H.P. 4P Table Rotation Speed …………… 72 R.P.M. (60Hz) Cooling Water Pump Motor ………….. 0.08 H.P. 2P Cooling Water Pump Flow …………… 0.9 CFM (60 Hz) Machine Weight …………….. 1,058 lbs Power Supply …………….. AC220V 3 Phase 2.5 kVA (Transformer Used Outside 220v Area) Air Supply …………… 60 C.F.M. Grinding Wheel …………….. CBN 5.31 Benefits: Fast and Easy to Use Fully automated machine Unmanned grinding cycle Kjdpfofuai Usx Aalelp Easy operation – load ᐳ inputᐳ start Programmable re-grind amount High Quality Finish Automatic feed of wheel prevents tool burn Automatic grinding wheel dress indication Excellent surface finish Safe Unique safety locking system ensures operator safety Visual operation/standby indication Coolant and Filtration System Automatic coolant application prevents tool burn High quality finish maintained by filtration of coolant liquid

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: Kledpfofuancjx Aalop No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Klsdpehcnxrofx Aalep Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Kjdof A R Uhjpfx Aalslp Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Year of construction: 2001, condition: good (used), Used Trumpf V series cnc pressbrake for sale Trumpf v85 2.5m x 85ton – 6axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Year: 2001 Total axis: 4axis back gauge / total axis 7 – y1 y2 x r z1 z2 and i axis Complete with: • Usb upgrade on the control • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 4axis back gauge Kodpfx Aof Txi Sealelp • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition • Full length of top and bottom tooling – brand new Trumpf pressbrake tooling in stock available for sale Delivery to your works, installation and tuition with your operators available.