Used Press Shear Scrap for sale (14,048)

Condition: used, Year of construction: 1989, total length: 1,600 mm, total width: 1,700 mm, total height: 2,750 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No Lsdpfxox Dkfpe Amrsac - CE certificate present: No - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 - Drive system: Conventional - Punching force [ton]: 60 - Round bar cutting capacity [mm]: 40 - Motor power: 4.0kW - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) Laedpfx Aewraazsmrec - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total length: 2,000 mm, total width: 1,100 mm, total height: 2,300 mm, Empty weight: 500 kg - Year: 1981 Laedpfxoxhcgys Amrsc - Documentation available: No - CE certificate present: No - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Empty weight: 5.500 kg Laodoylb Edopfx Amrsc - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg Ljdpfxszdnzho Amreac - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping Ledpowrza Asfx Amrsac EFL Easy Form laser measuring & correction system Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Ljdpfx Ameuipu Eereac Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Hydraulic press brake LVD PPEB-5 135/4000 CADMAN CNC Year of construction: 2004 Serial number: 29443 Technical specifications Force: 1350 kN Working length: 4000 mm Distance between uprights: 3150 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 12 mm/s Return speed: 115 mm/s Weight: 11,500 kg Motor: 15 kW COMMAND CONTROL CADMAN CNC 5 axes • Table PP8170 V-axis • 2 front supports PP1110 Ledpfx Amoy Avptsrjac • Wila top tool clamping – hydraulic PP3100 • Back gauge X -R -V • Distance reach X axis: 600 mm • Lasersafe security guard CE

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Lodpfey Avnpox Amreac Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, Hydraulic shear LVD HST-C 40/6.35 Year of construction 1998 Serial number 25379 Technical specifications Max sheet thickness 6.35 mm Cutting length 4050 mm Back gauge range 1000 mm Cutting angle 0.5°-2° Blade clearance 0,05-0.8 mm Number of strokes per min 10-45 Number of hold dawns 21 motor 7.5kW weight 9500 kg Lajdoxcf Snopfx Amrsc oil 150l Voltage 3 x 380V included : ELGO P85 for back gauge Security norms CE 1 square arm from support L1000mm 1 extra support L1000mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Lasdsyag Uajpfx Amrec Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm electric powerd back guage with elgo "go-to" controller plate following system at back guage

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Hydraulic press brake LVD PPBL 40/20 Year of construction: 1999 Serial number: 25656 Technical specifications Pressing force: 400 kN Working length: 2000 mm Distance between uprights: 1640 mm Ledpfx Amoy Avr Uoroac Stroke: 100 mm Distance table – ram: 300 mm Throat depth: 200 mm Table width: 140 mm Approach speed: 80 mm/s Working speed: 10 mm/s Return speed: 90 mm/s Weight: 3300 kg Motor: 3 kW Options included: ELGO P8822 for X and Y axes 2 fingers on the back gauge

Condition: excellent (used), Ifsys Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper Lajdezd Rk Ejpfx Amrjc 1 x return conveyor belt 2 x control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (See picture) Ljdpfx Ajzd Rhkomrjac (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Ledpfozdn H Rjx Amreac Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2005, sheet width 3050 mm plate thickness 16 mm distance between columns 3100 mm no. of strokes 16 Hub/min back stop - adjustable 10 - 1000 mm cutting angle 0,5 - 2,5 ° down holder 13 Stück Ledpfx Amsyzi Nworeac oil volume 300 l total power requirement 22 kW weight 14000 kg dimensions 4100 x 2300 x 2000 mm Features: - Electro-hydraulic, slide-guided sheet metal shear - With ELGO P9724 NC digital control unit * Ability to enter target and actual values for the backgauge * Digital display - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Front finger guard - 1x sturdy side stop with T-slot

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) Laedpfxszd Hb Ho Amroc - operating instructions (machine control system) - Transport stand (homemade)

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Specifications: X/Y axis working area: 3000 x 1500 mm Z axis working area: 115 mm Control system: SINUMERIK 840D sl USB port: yes Lasdozgf Tgepfx Amrec Dimensions: Length: 11400 mm Width: 7000 mm Height: 3200 mm Control, hardware, electrical equipment Control system: Siemens 840D SL User interface: Windows 10 IoT Screen: Multi-touch monitor Screen size: 19" Interface: USB Axis data - Max. speed Speed: 235 m/min Working area X-axis: 3000 mm Y-axis: 1500 mm Z-axis: 116 mm Max. workpiece weight, pallet changer: 1100 kg Max. workpiece weight, both pallets: 2200 kg Laser-specific data - TruDisk 8001 Max. laser power: 8000 W Max. sheet thickness, structural steel: 25 mm Max. sheet thickness, stainless steel: 40 mm Max. sheet thickness, aluminum: 25 mm Max. sheet thickness, copper: 16 mm Max. sheet thickness, brass: 10 mm Configuration: ⦁ Working area: 3000 x 1500 mm ⦁ Enclosed machine frame ⦁ Machine cooling unit (water-air) ⦁ Automatic pallet changer in longitudinal direction ⦁ High-speed cutting package ⦁ Water-air cooling unit ⦁ Laser extraction ⦁ Smart Beam Control (intelligent beam monitoring) ⦁ Performance package for fusion cutting ⦁ Installation: Left-hand side ⦁ Cleaning brush ⦁ Integrated camera ⦁ Smart Collision Prevention ⦁ Automatic nozzle cleaning ⦁ Electric roll-up cover ⦁ Nozzle changer ⦁ Wireless operation point ⦁ Copper cutting package ⦁ Brass cutting package ⦁ Performance package for fusion cutting ⦁ Coolline ⦁ Brightline ⦁ Teleservice Automation: ⦁ Loadmaster (Liftmaster also available as an option)

Condition: good (used), Hydraulic press Lsdpfxozdufyo Amrjac 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Width 1000 mm Depth 780 mm Weight 325 kg

Condition: used, Year of construction: 1964, total length: 2,100 mm, total width: 1,500 mm, total height: 1,850 mm, Colour: Green Weight: 2.500 kg - Year: 1964 - Documentation available: No - CE certificate present: No - Serial number: 13120 - Drive system: Conventional - Number of axes [pcs]: 1: Y1 - Press force [ton]: 50 - Max. working width [mm]: 2000 - Backgauge depth [mm]: 0 - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 2100mm x 1500mm x 1850mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lodpfezc Irrsx Amrjac Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Lasdpfx Aszgfizemrsc Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Autoriv manual workstation A220-PD assembly system is a stationary manual workstation for processing press-fit elements. Intended use: The machine is used to press in fasteners. The worker inserts the corresponding screws, plastic nuts and the component to be and the component to be processed into the machine by hand. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fasteners: Press-in nut, rivet nut, self-piercing nut, press-in stud, punching stud / rivet stud Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connector plug HAN 10, not wired Temperature ranges: Transport: - 20°C to + 60°C Operation: + 10°C to + 40°C Storage: - 20°C to + 50°C Compressed air connection: Operating pressure: 6 bar Quality: Conditioned, water-free and and unlubricated air Connection: 1⁄2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Lajdpfx Ajtgik Remrjc Variant: Manufacturer FESTO Control system: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fasteners are pressed in automatically. Movements are only triggered when the operator presses the foot pedal and triggers the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: Used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV Laodpfezfqgisx Amrec frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: good (used), Year of construction: 2019, Used Durma tandem CNC press brake 2 x AD S 30320 = 6200 x 640 tons Lasdpfx Amjzcvfaerjc Reach: 750 mm Cybelec CNC control Wila hydraulic clamping system (top and bottom) CNC crowning 4-axis backgauge (X, R, Z1, and Z2) Includes tooling (see images) Machines can be loaded onto a truck and are immediately available.

Condition: excellent (used), Ice cream press, shaper, spaghetti ice cream press, ice cream press cup -made of stainless steel tube: Ø 79 mm Lasdpfx Amjc H S D Ioroc -Shape: Spaghetti 44 pieces available -Holes: Ø 3 mm -Shape: wide pasta, tagliatelle, lasagne, 24 pieces available -Slot: 4 x 49 mm -Price per piece -External dimensions: 160/79/H78 mm -Weight: 0.45kg