Used Safan E Brake for sale (51)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Gkjdpfxout S E Ne Aaysf Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, General Data Measurements height 2810 mm Machine weight 6400 kg Measurements depth 2140 mm Main Drive Number of axis 6 Bending length 3060 mm Stroke 300 mm Pressing force 1000 Kn Gksdpfjx D Eansx Aayjf Movement X-Axis Movement 600 mm Y-Axis Movement 300 mm Dimensions Machine Length 4175 mm This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information Application Types Bending

Condition: good (used), Year of construction: 2007, Gebruikte 3 meter Safan E Brake Type: E Brake 100 3100 TS1 Capaciteit: 3100 x 100 ton Safan Touch screen besturing Y1, Y2 en X CNC gestuurd Gkjdpfswmcz Djx Aaysf Handmatige R as (voorzijde) Euro/Amada gereedschapopspanning Bouwjaar: 2007 1 set gereedschap inbegrepen

Condition: good (used), functionality: fully functional, Year of construction: 2004, The machine is in good technical condition. Nominal forming force: 65t Working length: 2550mm Weight: 5500 kg Inspection in operation is possible by prior arrangement. Gkjdpfx Aaoxtqvmeyef

Year of construction: 2017, operating hours: 14,746 h, condition: ready for operation (used), General Data Machine weight 4750 kg This 4-axis SAFAN E-Brake B 50-2050 press brake was manufactured in 2017. It features a maximum pressing force of 500 kN and a bending length of 2050 mm. Equipped with an EC 20 control unit, it ensures precision with programmable backgauge axes including X and R. Ideal for high-capacity bending tasks, consider the opportunity to buy this SAFAN E-Brake B 50-2050 press brake. Contact us for more information. Application Types Gkedpfxox D Ia Dj Aayjf Bending

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 5500 kg Main Drive Number of axis 3 Additional Equipment Laser Guidance: Ensures precise and fast operation. High-Speed Modes: Extremely efficient and quick operating capabilities. Gkedpfx Aaex D Sfksyof User-Friendly Programming: Easy-to-use interface with a large memory capacity, capable of storing over 10000 part files and programs. This 3-axis Safan E-Brake 80-2550-Ts3 CNC press brake was manufactured in 2006. Ideal for precision bending applications, it offers robust performance and reliability. Consider the opportunity to buy this Safan E-Brake 80-2550-Ts3 CNC press brake. Contact us for more information. Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 1999, Neat used press brake from Safan Type CNCL K 110 3100 Safan TS1 control Capacity 3100 x 110 ton Gkjdpfx Aajxzff Sjyjf Y1, Y2 and X axis CNC controlled CNC Bombering Set of tools included

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW Gsdpfx Aaoxpqy Doyekf - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, back gauge travel distance Z-axis: 1,000 mm, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Gsdpfoxzf Dzex Aayekf Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1991, Pressing force 1500 kN Gksdpjvy Hd Refx Aayof Working width 3100 mm Stroke 200 mm Motor 11 kW Dimensions LxWxH: 2100 x 2000 x 2800 mm Weight 9,600 kg Incl. tools, see PDF

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: K 3945, working width: 3,100 mm, stroke length: 300 mm, pressing force: 170 t, TECHNICAL DETAILS Press force: max. 1,700 kN Working pressure: max. 345 bar Connected power: 11 kW Working range Working length: max. 3,100 mm Stroke: max. 300 mm MACHINE DETAILS Connection voltage: 3×400 V 50 Hz Gkjdpfx Aaewlqa Sjysf Weight: 12,500 kg Top beam stop time: < 94 ms

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Gksdew Hx Rzepfx Aayef Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 3-meter CNC press brake from Safan Model: H Brake 120 3100 Year: 2005 Capacity: 3100 x 120 tons Gksdpfx Aajxtbqueysf CNC control of Y1, Y2, X, XDelta, R, Z1, and Z2 axes WILA new standard tool clamping Upgraded ESA graphical controller Lazersafe laser system

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, distance between stands: 2,550 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Godoxyw Sbopfx Aayekf Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used small press brake from Safan Gkedjxp Rg Rspfx Aayjf Model: UCK 50 1250 Capacity: 1250 x 50 tons Year of manufacture: 1990 Y1, Y2 and X axes (manual) 1 set of tools

Condition: used, Year of construction: 1996, Used CNC press brake from Safan Gjdpfxjwrz Ugj Aayokf Type: SMK 40 2050 Capacity: 2050 x 40 ton Y1, Y2 and X CNC controlled 1 set of tools included (not in the pictures)

Condition: good (used), Year of construction: 2001, Used CNC press brake from Safan Gkedpfx Aewrz Sfjayef Type: SMK 40 2050 TS1 Capacity: 2050 x 40 ton Y1, Y2, X, R, Z1 and Z2 CNC controlled Euro tool clamping Year of manufacture: 2001

Condition: good (used), Year of construction: 2002, Nette gebruikte kantbank van Safan Godpfxswz I Ekj Aayjkf Type CNCL K 170 3100 TS1 Safan TS1 besturing Capaciteit 3100 x 170 ton Y1, Y2, X, R, Z1 en Z2 CNC gestuurd CNC Bombering Wila New Standard gereedschapsklemming

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No Gkjdsxwmwbspfx Aayof - Drive system: CNC - Control system brand: Delem - Control system type: DA-53T - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 40 - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Punch holder: Standard - Tool holder type: WILA-standard - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1993, total length: 3,900 mm, total width: 2,000 mm, total height: 1,800 mm, Weight: 6.000 kg - Year: 1993 - Documentation available: Yes - CE certificate present: No - Serial number: B 7888 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge depth [mm]: 1000 - Transport dimensions: 3900mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gedpowya Rvefx Aayskf Lukas van Rossum

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer, hydraulic unit from guillotine shears SafanTyp VS 255-4 -Hydraulic pump: Sauer Type 4 P 023 LM 929 -Motor: rotor 5.5 kW / 1450 rpm -Hole distance: 215/140/Ø12 mm -Individual components: see photos -Dimensions: 735/350/H300 mm -Weight: 88 kg Gkedei Dudkopfx Aayof

Condition: good (used), functionality: fully functional, Year of construction: 1980, Used Safan guillotine shear Type VS 310 6 Gkjdpfx Aoxzga Reaysf Capacity: 3100 x 6 mm Electric back gauge Manual adjustment of cutting angle and blade gap

Condition: used, Year of construction: 1989, Manufacturer: Safan Type: VS 310-10 Cutting width: 3100mm Max. Thickness: 10mm Motor-power: 15kW Machine indicated cutting line, but is without backgauge. Gedpfx Aewnhivoayskf - Year: 1989 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 1976, Used Safan guillotine shear Gkodpfxjxzf Ugj Aayof Type VS 255 8 Capacity 2550 x 8 mm Manual backgauge, cutting angle adjustment, and blade clearance adjustment

Condition: used, functionality: fully functional, Year of construction: 1997, Used Safan guillotine shear Type: VS 255 4 Capacity: 2550 x 4 mm Gkjdsxzf Sljpfx Aaysf Electrically adjustable backgauge Manual adjustment of cutting angle and blade gap