Used Preset for sale (361)

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter 22t HS-22P PRO With a splitting force of 22 tonnes, the 22t HS-22P PRO handles even the toughest wood and thick logs effortlessly. Its robust construction (290 kg net weight), low-wear hydraulic system, and high-strength steel frame ensure long service life, maximum stability, and reliable performance – even during continuous operation. PTO Drive – Direct Connection to Tractor Thanks to its PTO (power take-off) drive, the HS-22P can be directly connected to the tractor. This gives it outstanding mobility and independence from external power sources – ideal for use in the forest, on meadows, or around the farm. The splitter operates with stable power transmission and a powerful hydraulic pump, enabling fast splitting cycles. Durable Construction – Built for Heavy-Duty Use The design features high-strength steel components and a stable splitting wedge guide. Solid support feet provide a firm base, while large transport wheels allow for easy relocation – even on uneven terrain. Splitting Length up to 110 cm Long logs can be processed with ease. The heavy-duty splitting blade made from tool steel ensures a precise split line and minimal wear. Integrated Log Lifter – Enhanced Comfort & Safety The log lifter allows heavy logs to be raised effortlessly and also serves as a protective guard – greatly simplifying everyday work. Two Return Modes & Speed Levels -- Automatic return: The splitting wedge automatically returns to the preset position – ideal for rapid work cycles. -- Manual return: For precise splitting, especially when processing irregular wood. Todpfxew Smm Ts Ahujf Additionally, a fast mode for approach and a slow, high-power mode for splitting are available. Practical Features for Daily Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-hand safety operation for maximum protection -- Three-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-22P -- Splitting force: 30 t -- Weight: 370 kg -- Drive: PTO (540 rpm) Dimensions: -- Length: 1300 mm -- Width: 1450 mm -- Height: 2470 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 11.5 cm -- Piston rod: Ø 6 cm -- Splitting wedge: 22 cm -- Splitting diameter: max. 35 cm / min. 8 cm -- Wedge-to-ground gap: 20 cm Speed: -- PTO: Forward 8.0 s / Return 9.0 s Your Advantages at a Glance -- Ready to use immediately – no long waiting times -- Solid construction – 290 kg net weight for maximum stability -- Flexible operation with tractor -- Convenient log lifter for heavy timber -- Spare parts always available -- Expert service & advice Whether delivery or collection in 48465 Schüttorf – we provide the right solution.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) Tjdpfswx Dcysx Ahuof * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: used, Year of construction: 2006, SAKURAI OLIVER 475 SDW Straight machine 4 colors high pile Max speed 15.000 sheets/hours Max paper size: 600 x 790 mm Min paper size: 260 x 400 mm Paper thickness: 0,04-0,6 mm Tsdpfoxuu Rqsx Ahusf Max impres size: 585 x 785 mm Anti-Static Steell plate in feeder and delivery Pneumatic feeder table Ultrasonic Double Layer Detector SAS - Sakurai Auto Set - Preset (automatic adjustment of pressures and size) SPC - Automatic plate change POD - Interactive Diagnostic Screen SCCII - Control desk (Inking, dampening, Cincunferential, axial and lateral registration, day light illumination) QSS Fast job change OLIVERMATIC continuous dampening Double diameter of printing and transfer cylinders Automatic Print and Rubber Cylinder Washer Chromed cylinders Pneumatic Compressors Powder spray Sheet de-curler Tools, documentation In production Free of damage

Condition: new, Discover the ultimate power and precision of our vertical lathe series. With its robust construction and proven technology, it delivers groundbreaking results for your machining projects. Experience the limitless possibilities of our CNC variant and take your production to the next level. TECHNICAL MAIN DATA (CNC MODEL): - Max. swing diameter: 1500/1800/2750/4000/5000 mm - Max. turning diameter: 1250/1600/2500/4000/5000 mm - Max. workpiece height: 1000/1600/2000/2000/2000 mm - Spindle motor power: 30/37/55/75 kW - Table diameter: 1000/1250/2250/3600/3600/4500 mm - Max. table speed: 500/400/120/63/63/50 rpm ACCESSORIES: Fanuc or Siemens control, ZF gearbox, chip conveyor, lubrication system, hydraulic system, machine guard, air gun, tricolor lamp, work light, chip cart, foot pedal, standard tool holder. SPECIAL ACCESSORIES: C-axis, tool magazine, linear scale, tool presetter, workpiece probe, electrical cabinet air conditioner, special tool holder, and more. Todpfx Ahjd I I Ileuof For further details, please refer to the attached PDF file. TECHNICAL MAIN DATA (CONVENTIONAL MACHINE): - Faceplate diameter: 1000|1400|1800|2000|2300 mm - Swing diameter: 1200|1600|2000|2300|2600 mm - Turning height: 1000|1250|1400|1600|1500 mm - Table speed: 6.3-200|5-160|3.2-100|5-160|2.5-80 m/min - Gear stages: 16 - Max. workpiece weight: 3.2|5|8|8|8 t - Main motor power: 22|30|37|37 kW - Approx. machine weight: 9|14|18|23|21 t ACCESSORIES: Tool holder: 5-fold; Faceplate: with 4 jaw clamps; Servo motors: for axis adjustment, and more. For further details, please refer to the attached PDF file. Conventional vertical lathe with solid and proven technology, power, and precision for the machining of heavy workpieces. - Optimal loading - easily accessible with crane and forklift - Vertical support with 5-fold tool holder and side support (optional) with separate feed for internal and external machining - Heavy-duty column construction with wide, hardened guides - Hydraulic clamping of the crossbeam - Stable guide construction provides excellent stability and accuracy to the vertical arm - The spindle runs in a highly precise double-row roller bearing and is adjustable - The drive is through a reduction gear for high torque and a speed range of 2.5 - 80 min- Warranty: 12 months on the machine Now get a 15% energy subsidy from BAFA when replacing an old machine! Also benefit from the favorable leasing and hire purchase conditions of our leasing partners. Ask us about it. Of course, you also receive free delivery, assembly/commissioning, and ready-to-use handover as well as control training from us. The special net price displayed refers to the smallest model of the conventional series. The images show the CNC variants as well as a conventional version.

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Tedpfexnlflox Ahusf Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 0509, input voltage: 230 V, For sale is an analogue presetting device Zoller Bravo 2. The item is in good condition. Presetting device Zoller Bravo 2 Serial number 0509 Year of manufacture 1999 Voltage 230 V∼ L/N/PE Frequency 50/60 Hz Tolerance (voltage) −10% to +6% Tsdpjxwlpcjfx Ahujf Pneumatics (compressed air) 4−6 bar Power

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter 30t HS-30P PRO With a splitting force of 30 tons, the SCHORR HS-30P effortlessly tackles even the hardest woods and thick logs. The robust construction (370 kg own weight), a low-wear hydraulic system, and a high-strength steel frame ensure long service life, maximum stability, and reliable operation—even in continuous-duty applications. PTO Drive – Directly via Tractor Thanks to its PTO drive, the HS-30P can be directly connected to a tractor. This makes it highly mobile and independent of power sources—ideal for use in forests, meadows, or farmyards. The splitter operates with stable power transmission and a high-performance hydraulic pump that ensures fast splitting cycles. Durable Construction – Engineered for Tough Conditions The design relies on high-strength steel components and a stable wedge guide. Sturdy support feet provide secure footing, while large transport wheels make relocation easy—even on uneven ground. Splitting Length up to 110 cm Long log sections can be processed without issues. The robust splitting blade made of tool steel guarantees a precise split line and minimal wear. Integrated Log Lifter – Enhanced Comfort & Safety The log lifter allows for effortless lifting of heavy logs and simultaneously acts as a protective guard—offering significant relief in daily operations. Two Return Modes & Speed Settings -- Automatic Return: The wedge returns autonomously to the preset position—ideal for fast working cycles. -- Manual Return: For precise splitting tasks, especially with irregular logs. Additionally, a rapid advance speed and a slow, extremely powerful splitting stage are available. Practical Details for Everyday Use -- Retractable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-hand safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient transport with the tractor Technical Data -- Manufacturer: SCHORR -- Model: HS-30P -- Splitting force: 30 t -- Weight: 370 kg -- Drive: PTO (540 rpm) Dimensions: -- Length: 1540 mm -- Width: 1400 mm Tsdpfew Smlpsx Ahuof -- Height: 2500 mm (retracted 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Splitting diameter: max. 40 cm / min. 8 cm -- Distance wedge-ground: 16 cm Speed: -- PTO: Advance 5.5 s / Return 9.5 s Your Advantages at a Glance -- Ready for immediate use—no long wait times -- Robust design—390 kg own weight for maximum stability -- Convenient log lifter for heavy wood -- Spare parts always available -- Expert service & advice Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Condition: good (used), Year of construction: 2013, operating hours: 4,951 h, functionality: fully functional, machine/vehicle number: 1002823, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 3,500 mm, table width: 1,000 mm, table length: 1,400 mm, table height: 960 mm, table load: 200 kg, overall weight: 2,000 kg, operating hours of spindle: 2,803 h, DATRON M 10 PRO A CNC Milling Machine - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 16 A - Operating pressure: 7 - 10 bar - X-axis travel: 1020 mm - Y-axis travel: 830 mm - Z-axis travel: 240 mm - X and Y travel limited by tool changer: 1020/720 mm - Gantry clearance: 200 mm - Bushing distance: 100/100 - Table cut-out width/depth: 630/348 mm - Table width: 1000 mm - Table depth: 1400 mm - Table height: 960 mm - Max. table load: 200 kg - Distance to outer edge: 175/148 mm Tjdpfx Asxxwxfohujf - Recorded machine operating hours: 4951 h - Spindle running time: 2803 h The machine is equipped with a tool presetting device from manufacturer SCHUNK, type TRIBOS. Includes various holders and a vacuum pump. FCA D-01237 Dresden – loaded on truck

Year of construction: 2019, operating hours: 11,111 h, condition: ready for operation (used), Control Unit Brand HAAS Model n/a Main Drive Spindle speed range 4000 rpm Additional Equipment Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm Todpfexz H Stox Ahujf Features: Hinged belt chip conveyor, Lathe parts catcher Coolant System: 208l coolant tank, Variable coolant flow Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN Additional Features: Macros, SOM This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2006, with C-axis with driven tools Todpfx Ajr E Amgshuof FANUC 18T-C control turning diameter -380 mm turning length 490 mm Spindle speed -3,500 rpm Upper turret holder with 12 positions, 6 of which are driven Tool presetter Chip conveyor

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, working width: 6,100 mm, total length: 6,750 mm, total width: 1,550 mm, total height: 1,820 mm, input voltage: 400 V, - Hub cylinder seals have been gradually replaced over the last 6 years Tedpfxexv Akbo Ahuof - Oil change carried out 2 years ago - Machine was inspected by a specialist - Two adjustable angle presets - Electric cutting device - Cable for the cutting device was renewed 3 years ago

Condition: used, mileage: 49,900 km, power: 390 kW (530.25 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: soot filter, Vehicle number: 520065 Former non-binding manufacturer’s recommended retail price: €129,900 1 owner, accident-free, full service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system INTERIOR * Side paneling Tedpfev A Ehmox Ahujf EXTERIOR * Exterior sun visor OTHER EQUIPMENT * ZF intarder Further features -----Color/Paint----- * Chassis color: Anthracite Grey * Cab color: E1980WHTE CRYSTAL WHITE * Roof spoiler color: Crystal White * Side fender color: Crystal White * Side skirt color: Crystal White * Mirror housing color CMS: Crystal White -----Tires/Wheels----- * Manufacturer: Goodyear * Front axle(s): 385/55R22.5 * Alcoa Dura-Bright aluminum wheels, 32 mm * F1: 385/55R22.5 GO AFMAXS 160/000 K Steering ABA * R1: 315/70R22.5 GO FMXDE 154/150 L Traction BBA 3P * RR: not applicable -----Equipment/Special Equipment----- * XG+ cab * Air-suspended cab * Passenger seat: cinema & table, fabric upholstery * Adaptive cruise control with FCW and AEBS-3 * Front axle: 8.00 t, parabolic, 163N * Emission standard: Euro 6 * Automated transmission, TraXon, 12 gears * Standard component layout * DAF Connect * Warranty Plus Drivetrain: 3 years/500,000 km * Climate package * Signal horns, 2 sets * Two LED spotlights for cab rear wall * Windscreen with sun protection film * Laminated glass with sun protection film * DAF digital vision system * DAF Corner View * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for XG+ cab * Extended side fenders * Driver’s seat: Super Air * Driver’s seat with swivel base * Refrigerator and drawer * Mattress for DAF Relax Bed * Curtains with partition curtain * Integrated stationary air conditioning * Accessory power supply: Standard + 2x 40 A * ECAS remote control with extended functions * FMS connector, extended and prepared * Digital tachograph, VDO 1C, Version G2V2 * Speed limiter preset: 90 km/h * Antennas: DAB radio prep., 2x mobile, GNSS extra: CB * Predictive cruise control * Turn assist * Rear: SR1347 air suspension * Axle load monitoring * MX-13 engine, 390 kW/530 HP, cab emblem: 530 * ECO Performance * 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 * Rear axle ratio: 2.40 * Mechanical differential lock * Wheelbase 4.00 m / rear overhang 0.99 m * EAS unit right, rear overhang 85 l, mudguard left * Aluminum compressed air tanks * Tool box: 675 mm left + 340 mm right, height 620 mm * Fuel tanks left and right * One wheel chock * SAF S36-20, cast iron, 150+40 mm, low-maintenance * Fixed steering right, no first right * Alternator 130 A, batteries 2 x 210 Ah AGM * Dual-circuit hydraulic system, high/low pressure mounted ---- Subject to prior sale and errors. The vehicle description serves solely for general identification and does not constitute a warranty as defined by sales law. Exact equipment details can be obtained from our sales staff. Please contact us.

Condition: new, Special offer price €7,700 instead of €9,500, excl. VAT. - Drill head is 360° swiveling around the column and height adjustable - Gearbox built with traditional, proven technology for maximum torque – helical gears made of fiber-reinforced steel ensure high efficiency, low noise levels, long service life, and virtually maintenance-free operation - Spindle made of steel – adjustable tapered roller bearings (ball bearing design) guarantee optimal tool concentricity - Adjustable spindle return spring – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox features automatic overload protection and can also be manually disengaged) - Electromagnetic feed and automatic tapping device (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height adjustable and 360° swiveling around the column - Drill column made of steel – guarantees long-term machine stability as well as high precision and angular accuracy between drill bit and table Tsdpsw A Ac Hofx Ahuef - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release, and emergency stop switch Optional equipment: - LED work light - Tool set for MT4 - Machine vice, 150 mm jaw width - 2 x T-slot nuts - Drill chuck 1 – 13 mm B16 Metabo, arbor MT4 - Reducing sleeve MT4 / MT3 - Reducing sleeve MT4 / MT2 - Reducing sleeve MT4 / MT1 - Automatic tapping device - Complete coolant system - Swivel device for table 400 x 500 mm - Foot-operated spindle motor on/off switch - Spindle nose with thread for tool holder - Lower spindle speeds 60 – 980 rpm - Higher spindle speeds 180 – 3,000 rpm - Handwheel cross handle with 3 levers - Cross table FB102, 584 x 242 mm, longitudinal travel 415 mm, cross travel 155 mm - Milling chuck ER, MT4, 5, collet sizes 6, 8, 10, 12, and 20 mm - Drill chuck 0 – 13 mm with arbor MT4 - Drill chuck 3 – 16 mm with arbor MT4 - Special paint finish Technical specifications: - Drilling capacity: 40 mm - Quill stroke: 190 mm - Tapping capacity (steel / cast iron): M24 / M28 - Spindle taper: MT4 - Spindle speed: 90 – 1,500 rpm - Gear steps: 8 - Max. distance spindle/table: 830 mm - Max. distance spindle/base plate: 1,210 mm - Throat depth: 330 mm - Table size: 500 x 400 mm - Column diameter: 140 mm - Motor power: 2.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 2,120 x 750 mm - Weight: 310 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 500 mm, PROMOTIONAL MACHINE – STOCK CLEARANCE SALE Caruso MT-210MCx500 with Siemens 828D control Used machine, year 2023 Ready-to-turn, flat-bed CNC lathe in slant-bed design for universal use in both small and large batch production, featuring a 12-position VDI 30 turret. Machine features: • Hinged belt chip conveyor • Parts catcher • Reinforced coolant pump, 5 bar • Automatic tool measurement for tool presetting • 3-jaw power chuck, diameter 10'' • Programmable tailstock with hydraulic quill Performance characteristics: • Simplified, workshop-oriented programming via the integrated Siemens ShopTurn user interface • Maximum spindle speed: 4,200 rpm • Driven tools, max. 1,000 rpm • Compact footprint • Simple, quick, and precise automatic tool measurement • C-axis with 0.001° positioning accuracy Tjdpfx Ahexp A Dzsujf PRICE NON-NEGOTIABLE! SALE EX WORKS BOCHUM! SALE WITHOUT WARRANTY! PRICE INCLUDES TRANSPORT TO CURBSIDE AND COMMISSIONING (within Germany): €55,000 NET

Condition: new, Year of construction: 2025, working width: 31,400 mm, bending angle (max.): 155 °, overall weight: 700 kg, total length: 36,000 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, bending cheek thickness: 30 mm, clear span: 80 mm, working height: 900 mm, Equipment: documentation/manual, AUTHORIZED DEALER Company PROD-MASZ. Tjdpfxouayame Ahusf BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR3000/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 3140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 155° -Bending beam: 28 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 700kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 360 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for maximum performance. This range incorporates all the key features of RF chargers in terms of efficiency, power factor, ventilation, internal structure (dedicated 3 compartments), and overall flexibility. An integrated digital interface with an OLED display and built-in USB port provides the best and easiest overview/adjustment of charging parameters, diagnostics, and data reports. Key Features AC Mains Voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Display: OLED/LCD display, 4 LEDs and 4 control buttons Tedoxuqrwopfx Ahuef Settings: Via OLED display: current, capacity and 7 preset charging curves Via PC/laptop/USB connection: advanced programming Data Storage: Report on the last 50 charging cycles and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heatsink. Temperature-controlled Fan speed. Standby temperature within +104°F (+40°C) of internal components Efficiency: ≥ 92% Operating temperature: +32° to +104°F (0° to +40°C) Certification: CSA Safety Features Input protection: 3x Fast-acting AC fuses Output protection: Super-fast fuse (reverse polarity protection) Thermal protection: Probes on IGBTs, diodes, and power transformer (max. temperature adjustable) with derating Battery disconnect protection: Low-voltage safety shutdown (direct battery disconnection) Mechanical Specifications Dimensions: (L x W x H) 456 x 195 x 570 mm Protection rating: IP 21 (vertical) – Dedicated air cooling directly on the heat sink. Weight: 28 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), For sale: precision toolmakers' microscope from renowned Japanese manufacturer Mitutoyo, model TM-101 (Code No. 176-901). This device is designed for inspection of dimensions, shapes, profiles, surfaces, and contours in tool rooms, measurement laboratories, and quality control departments. Manufacturer: Mitutoyo Mfg. Co. Ltd. Japan Type: TM-101 Mitutoyo digital readouts on X and Y axes with ABS and INC functions, preset, and data output Measuring cross-table with rotation and adjustment Lighting functions: Surface, Contour, Main Power supply: AC 220V, 50–60 Hz, 8 VA Robust, stable industrial construction Very good condition, complete device, technically fully functional and ready for operation. Ideal for measuring cutting tools, milling cutters, drills, inserts, inspection of precision components, as well as contour, thread, and geometry measurements of workpieces. Todpfxow R E Hio Ahujf

Condition: new, functionality: fully functional, Multicolor screen for easy setup Presetting of the number of products to be packaged Integrated total product counter (with reset option) Roll change in under one minute Sealing by foot pedal, automatic, or manual operation Conveyor systems for automatic bag filling available on request Technical data Maximum bag length: 450 mm Maximum bag width: 250 mm Tsdoxlzr Aspfx Ahujf Maximum bag thickness: 0.04–0.1 mm per layer Packaging speed: up to 25 pieces/minute Supply voltage: 1Ph, 220 V, 50 Hz Total power: approx. 1 kW Machine weight: approx. 70 kg (including printer) Machine dimensions: approx. 670 × 665 × 860 mm Printing area: 53 × 75 mm Bag type: chain bags on rolls

Condition: new, Special offer €5,250 instead of €5,850 excl. VAT Tedpsuzhx Ajfx Ahuof Solberga SE2035 – Geared Pillar Drill - Drill head can be swivelled 360° around the column and height-adjusted - Gearbox built with traditional and proven technology for maximum torque – helical-toothed gears made from fibre-reinforced steel offer high efficiency, low noise levels, a long service life and an almost maintenance-free gearbox - Spindle made of steel – optimised tool concentricity thanks to adjustable tapered roller bearings - Adjustable return spring for the spindle – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox is equipped with automatic overload protection and can also be disengaged manually) - Electromagnetic feed and automatic tapping function (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height-adjustable and 360° swivelling around the column - Drill column made of steel – guarantees permanent machine stability as well as maximum precision and squareness between drill bit and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release and emergency stop switch Optional equipment - LED work light - Tool kit for MK4 - Machine vice 150 mm jaw width - 2 x T-slot nuts - Drill chuck 1 – 13 mm B16 Metabo, arbor MK4 - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic tapping device - Complete coolant system - Foot-operated tapping device - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool mounting - Cross table FB102 584x242 mm, longitudinal movement 415 mm, cross movement 155 mm - Drill chuck 0 – 13 mm with arbor MK4 - Drill chuck 3 – 16 mm with arbor MK4 - Special paint finish Technical specifications - Drilling capacity: 35 mm - Quill stroke: 150 mm - Tapping capacity (Steel / Cast iron): M 18 / M 22 - Spindle taper: MK4 - Spindle speed: 85 – 3160 rpm - Number of speeds: 8 - Max. distance spindle/table: 820 mm - Max. distance spindle/base plate: 1150 mm - Throat: 320 mm - Table size: 500 x 400 mm - Column diameter: 127 mm - Motor power: 1.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 1785 x 700 mm - Weight: 290 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 620130, color channels: 2, paper width (min.): 520 mm, paper width (max.): 740 mm, HEIDELBERG SM74-2+ Year 1994 Serial number: 620.130 92 million impressions Sheet-fed offset press – 2-color, low-pile delivery Straight printing configuration Sheet size: 20 x 28 inches (520 x 740 mm) Technical specifications: – Maximum speed: 15,000 sheets/hour – Maximum sheet size: 520 x 740 mm – Minimum sheet size: 210 x 280 mm – Maximum substrate thickness: 0.04–0.6 mm – Maximum print area: 510 x 740 mm – Plate size: 605 x 745 mm, 0.30 mm thick Todpfjxznmfox Ahuof – Blanket size: 616 x 772 mm, 1.90 mm thick Machine dimensions: – Length: 3.6 m – Width: 2.8 m – Height: 1.9 m – Power requirement: approx. 29 kW – Weight: approx. 9,150 kg Included equipment and accessories: – Stream feeder – Double sheet detector – electric – Electronic side lay control – Alcolor continuous dampening with chiller – Cooling and recirculation unit – CPTronic: Digital machine control and diagnostics with axial, circumferential, and diagonal register controls – Autoplate: semi-automatic plate change – Automatic blanket washing device – Automatic impression cylinder washing device – Automatic ink roller washing device – Preset feeder (automatic paper size adjustment) – Chromed impression cylinders – Chromed plate cylinders – Grafix powder spray unit – Plus version (prepared for numbering unit) – Oil drip tray, tools, documentation – Complete with all standard parts and accessories Condition: No damage to cylinders or gears Availability: Immediate Inspection: Machine can be demonstrated under power

Condition: ready for operation (used), Year of construction: 2000, operating hours: 7,487 h, functionality: fully functional, machine/vehicle number: 23MS0122, turning length: 492 mm, turning diameter: 290 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, swing diameter over bed slide: 550 mm, controller model: Fanuc Series 18-T, TECHNICAL DETAILS Capacity Swing diameter over bed: 550 mm Swing diameter over cross slide: 390 mm Maximum turning diameter: 290 mm Maximum turning length: 492 mm Travel X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° (0.001° increment) Spindle Maximum main spindle speed: 4,500 rpm Maximum sub-spindle speed: 6,000 rpm Chuck diameter: main spindle 210 mm / sub-spindle 135 mm Spindle bore: main spindle 76 mm / sub-spindle 45 mm Driven Tools Speed range: 6,000 rpm Feed Rates Rapid traverse X-axis: 20,000 mm/min Rapid traverse Z-axis: 25,000 mm/min Turret Number of tool stations: 12 MACHINE DETAILS Control: Fanuc Series 18-T Dimensions & Weight Dimensions (L x W x H): 3,320 x 1,700 x 1,740 mm Weight: 4,240 kg Operating Hours Cutting hours: 7,487 h Power-on hours: 62,730 h EQUIPMENT Chip conveyor Sub-spindle Driven tools Tool presetter Workpiece catcher Todpfx Asxrz Ukjhujf Box with collets 5x additional driven tools Bar feeder

Condition: ready for operation (used), Year of construction: 1999, This Star SA-12 was manufactured in 1999. It features a workpiece conveyor, 15-degree indexing of the main spindle, and a 3-spindle cross-boring unit. Additionally, it includes a tool presetting probe and a Star SA 16 telescopic tube. Consider the opportunity to buy this Star SA-12 swiss type turning machine. Contact us for more information. Tedpfjxrhdxex Ahuof Application Types Turning

Condition: used, This listing is for the Smeg GW1160S Lab Glassware Washer The unit is in full working condition and is ready for immediate use Key Features & Capabilities Thermal Disinfection: Heats up to 95 °C to deliver bactericidal cleaning for lab-grade glassware Programmable Control: Microprocessor-based electronic control with 9 preset programs and ability to store 6 custom cycles RS232 Connectivity: Integrates with external printers or PCs for traceability and logging Thermodynamic Drying: Equipped with active thermodynamic drying and a steam condenser (Ecoslim) featuring cold-water injection Construction & Design Internal Chamber: Made from AISI 316L stainless steel; robust, chemical-resistant, and easy to sanitize Exterior Finish: Panels constructed from AISI 304 stainless steel for durability and easy cleaning . Dual Wash Levels: Two independent rack levels on telescopic guides to accommodate varied glassware sizes Water & Chemical Handling Water Softener Built‑In: Includes a salt-sensing, auto-regenerating softener to prevent scale and enhance cleaning Dual Water Inlets: Compatible with both cold and demineralized water sources Detergent & Neutraliser Pumps: Comes standard with peristaltic pumps for alkaline powder detergent and acidic neutraliser; can optionally add more pumps Safety & Compliance Electronic Door Lock: Ensures the door remains securely locked during high-temp cycles Tedpfxoxhf Aqo Ahuof Safety Thermostats & Alarms: Features multiple thermostats, interlocks, plus acoustic and visual alarms . Dimensions & Power External Footprint: Approximately 600 × 600 × 850 mm, suitable for standard 60 cm bench space Chamber Size: Internal dimensions ~ 525 × 490 × 570 mm (depth varies slightly by source) Power Supply: Standard: 3-phase 400 V, 50 Hz, max 7 kW .

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, total length: 3,000 mm, total width: 700 mm, total height: 1,100 mm, No reserve price – guaranteed sale to the highest bidder! The workbenches are being auctioned as part of a business closure. Submitting a bid obliges timely collection between 26/01/2026 and 29/01/2026! 2 workbenches with contents. The contents include: Mounted vise, jaw width: 125 mm Tool presetting device Test pins Pins Fixtures Tsdpfx Ahjxqdvhsusf MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 3,000 x 700 x 1,100 mm Weight: 400 kg

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Todpfsxhfl Ejx Ahuef Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)