Used Preset for sale (297)

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Csdpfx Aajfci D Aexsrd Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Counter spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Speed range: 0 – 12,000 rpm Tool interface: Capto C6 Number of tool positions: 100 Hollow chuck: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis - Fully indexable B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system, 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through counter spindle - Manual tool presetting on the main spindle - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power shut-off - Tool offset for 5-axis machining - Programmable data input - Dynamic diameter/radius exchange - Stroke check before movement Operating hours: 26,875 h (as of 22.08.25) Cjdpfx Ajxxraqeaxsrd Spindle hours: 16,093 h (as of 22.08.25) Accessories, illustrated tools, and clamping devices are only included if explicitly specified in the additional information. Subject to change and error in technical details and specifications. Prior sale reserved!

Condition: new, Available in working lengths of 3000 - 4500 - 6000 and 7000 mm lengths Reversible Left or Right direction Anodised aluminium profile 105x 90 mm Reinforced 32 mm toothed belt Single phase motor 6 Nm 115 - 230 v Positioning speed 60 m/min Repeat precision +/- 0.1 mm Smart 7 touch screen colour control unit 7" display 3 working mades Manual for Absolute or Incremental working, Preset with 8 pre set positions and Automatic cutting list mode, USB port for importing cutting lists Cedpfx Aon Nv Ugoaxjrd

Condition: new, The Stromabstop Automatic Positioning System is crafted from years of industry experience in manufacturing fully automatic crosscut saws. Designed for ease of use and compatible across various applications, the Stromabstop applies precision cutting without the hassle of measuring and marking. With consistent accuracy, this intuitive positioning stop streamlines operations, whether for cutting, drilling, or other tasks. Programming is effortless with a user-friendly touch screen control panel, with USB connectivity for seamless importing of cutting lists. Optional optimisation software further enhances efficiency, making the Stromabstop the ultimate solution for precise, hassle-free positioning in your workflow. Available in working lengths of 3000 - 4500 - 6000 and 7000mm* *generally available from stock in 3000, 4500 and 6000mm lengths Reversible left or right direction Anodised aluminium profile 105 x 90mm Reinforced 32mm toothed belt Single phase motor 6 Nm 115 - 230v Positioning speed 60m/min Codpsriuutjfx Aaxord Repeat precision +/- 0.1 mm Smart 7" touch screen colour control unit 3 working modes: MANUAL for absolute or incremental working / PRESET with 8 pre set positions and AUTOMATIC cutting list mode USB port for importing cutting lists

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 0I-MF, table load: 500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HANNSA YL 850 B was manufactured in 2016. It features an X-axis travel of 850 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a FANUC 0I-MF CNC, a spindle speed of 10,000 rpm, and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the HANNSA YL 850 B vertical machining centre we have for sale. Contact us for further details. Crsdsy Nmnaopfx Aaxjd • Internal spindle coolant: 20 bar • Internal cooling Additional equipment • 4th axis table, 200 mm platter (continuous 4th axis) • Screw-type chip conveyor • Tool presetting on table edge Technical Specification Taper Size BT 40

Year of construction: 2020, condition: like new (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Csdpfxew Sfg Es Aaxjrd Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Csdew Ah Axjpfx Aaxsrd Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. Cedpfx Aajywuczsxsrd • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations Crsdpjx D Ezfsfx Aaxed • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots Cedpfxjw R T Die Aaxord For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: used, Year of construction: 1991, overall weight: 2,300 kg, power: 18.5 kW (25.15 HP), VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been completely overhauled and technically upgraded in 2025 and is fully operational and ready for use. The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to the start position. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. The PLC system also allows adjustment of key operating parameters depending on the material being shredded, including maximum working power, shutdown power threshold, and the forward movement speed of the hydraulic press. This makes it possible to optimize the machine for different materials and ensures efficient and safe operation. Technical Specifications: • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Throughput: up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm Crodpfxjt Dh T Ds Aaxed • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Speed: 1455 rpm Voltage: 400 V / 50 Hz Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Condition: fully operational after maintenance. Suitable for: Wood waste Pallets MDF and particle board Plastics Paper and cardboard Packaging waste Other recyclable materials

Condition: excellent (used), Year of construction: 1997, operating hours: 212 h, functionality: fully functional, color channels: 5, CP-Tronic digital machine control system CPC 1-04 Center control console with remote control unit for color zones, color ducts, and circumferential, lateral, and diagonal registration, with light guide and job memory card Alcolor film dampening system with circulation and cooling Ink temperature control (water-cooled) Autoplate automatic plate changing system Preset automatic format setting Automatic ink roller washing system Crodpezcwl Ujfx Aaxjd Automatic blanket and impression cylinder washing system Powder sprayer High-stack delivery Standard accessories

Condition: excellent (used), Year of construction: 2015, operating hours: 9,564 h, functionality: fully functional, CNC FANUC 31i-MODEL B5 Cedpfxswayv Ee Aaxjrd TOOL PRESETS N. 2 SELF-CENTERING N. 7 HSK TOOLS

Condition: like new (used), Year of construction: 2019, machine/vehicle number: 133901, Folder gluing machine for processing straight-line boxes, crash-lock bottom boxes, double-wall boxes, and CD/DVD sleeves. Feeder with vibrating device, infinitely adjustable distance between carton blanks, pre-breaking crease 1+3, bottom disc glue unit, electronic counter with digital display including preset counter, delivery with kick-out device, drying and press section synchronized with machine speed, can be controlled separately, belt speed 150 m/min. Codsyx Tn Espfx Aaxjrd

Condition: used, Year of construction: 1988, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe, manufactured in 1988, compliant with CE standards FANUC 10-T CNC control Flat guides ASA 5" Bar capacity: 42mm Maximum turning diameter over the bed: 450mm Maximum turning diameter: 250mm Maximum turning length: 400mm Maximum spindle power: 7.5Kw Weight approximately: 2,600 Kg Complete with: Hydraulic tool holder Tailstock 12-position automatic turret Cjdey S R E Uepfx Aaxjrd Presetting system Chip conveyor Bar feeder interface Part catcher

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe built on a MORI SEIKI SL-25 base, manufactured in 1998, compliant with CE standards. CNC FANUC 0-T control. Flat guides. ASA 8" spindle. 250mm self-centering chuck. Crsdpfx Aaey S Ry Eoxjd 75mm bar capacity. Maximum turning diameter over the bed: 520mm. Maximum turning diameter over the slide: 350mm. Maximum turning diameter: 550mm. Maximum spindle power: 18.5Kw. Weight: approximately 5,500 kg. Complete with a hydraulic self-centering chuck from KITAGAWA. Programmable tailstock with hydraulic cylinder. Automatic tool turret with 12 positions. Presetting function. Chip conveyor.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. Cedpozb Evlefx Aaxsrd REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: like new (used), functionality: fully functional, Year of construction: 2023, - Automatic hot mounting press - Product details: - corrosion-resistant table model with automatic hydraulic hot mounting - electro-hydraulic automatic system - 7-inch user-friendly LCD touchscreen system - Preset programming and data storage Crjdpet Dvyfjfx Aaxsd parameters (up to 100 memory locations) - Setting of heating time, cooling time, assembly temperature, pressure build-up and cycle start via the LCD touchscreen - Cooling process - slow cooling, medium cooling and fast cooling mechanism. - Easy replacement of the mold assemblies - Sliding locking mechanism - Automatic water cooling system - Timer buzzer display for heating and cooling cycles - Possible sizes: 1 inch, 1 ½ inch, 2 inch, 30 mm, 40 mm and 50 mm - Power supply: 230 V / 50 Hz - Machine color: 3-Rath design (grey/red)

Condition: excellent (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell Manufacturer: Mandelli Sistemi S.p.A. Model: Storm 2500 Type: U 42 / 8000 Factory No.: XXXX Year of manufacture: 2008 Origin: Italy Control: Siemens Sinumerik 840D System Control: CswWin / Beckhoff Industrial PC Condition/Maintenance: Very good / Single-shift machine / Very low operating hours Technical Data: X-axis travel: 2,600 mm Y-axis travel: 1,500 mm Z-axis travel: 1,800 mm B-axis: 360,000 positions / continuous APC / Pallet axis: 360,000 positions Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Accuracy to VDI 3441: Positioning accuracy P: 10 µm Repeatability Ps: 5 µm Spindle / Head: U-head horizontal / vertical Spindle taper: ISO SK 50 Speed range: 37 – 6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool Magazine: 208 tool positions Rack tool magazine with automatic tool handling Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Pallet System: Front transpallet / automatic pallet change system 6 pallets, each 1,000 x 1,250 mm 4 fixed stations Rotary unit for loading and unloading workpieces Electrical Data (as per nameplate): System: S2500 / 840D Rated voltage: AC 400 V, 3 Ph / PE Frequency: 50 Hz Current at full load: 178 A AC auxiliary voltage: 230 V DC auxiliary voltage: 24 V Standard: IEC 60204-1 / EN 60204-1 Chip Conveyor: Manufacturer: Meta Year of manufacture: 2007 Weight: approx. 1,100 kg Additionally, a screw conveyor is visible in the machine area. Equipment / Peripherals: Filtration unit Hydraulic power unit Chip conveyor Screw conveyor COSEMA peripheral unit Control cabinet system Coolant and lubricant periphery Separate operator panel Comprehensive pallet system Clamping Devices / Fixtures: Multiple heavy-duty angle plates, fixture plates, t-slotted/platen clamping plates, customer-specific clamping devices, and pallet setups are available. Tools / Accessories: Codpjy H D R Tjfx Aaxerd Numerous SK50 tool holders, boring bars, boring tools, milling holders, drill and reaming tool holders, extensions, adapters, as well as various spare and standard tools are visible. Several hundred additional tool holders can be purchased on request. Optional / On Request: Apfel tool cabinets with extensive tool inventory Additional clamping devices and fixtures ELBO CONTROLLI tool presetting unit Workbenches / tool storage / racking systems by agreement The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell for the flexible complete machining of large and complex workpieces. The work area shows normal signs of wear characteristic of a production heavy machining system. The system must be removed from the facility in June 2026. Earlier availability possible by arrangement. Inspection under power is possible by appointment. All information provided to the best of our knowledge. Subject to errors, prior sale, and technical modifications.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm Crjdey Ey N Nopfx Aaxod • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms • EXW sale • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Credsy Diabopfx Aaxsd

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Codjxrggljpfx Aaxerd

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis Cjdpjvtrc Sefx Aaxerd 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: SIEMENS, controller model: 840D, rotational speed (max.): 12,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Year: 2018, CE compliant CNC: SIEMENS 840D with SHOP MILL 4+1 axes ONLY 18,300 power-on hours Worktable dimensions: 2-piece table - fixed 920x540 mm / rotary-tilting 650x500 mm (with extension ring) Longitudinal X-axis travel: 1520 mm Transversal Y-axis travel: 520 mm Vertical Z-axis travel: 420 mm Spindle taper type: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Approximate net weight: 10,000 kg Accessories: Csdpfx Aaey Azclsxjrd Internal coolant Chip conveyor Full upper enclosure Pneumatic door opening BLUM tool presetting and workpiece probe capability

Condition: used, Year of construction: 1998, operating hours: 8,700 h, functionality: fully functional, The used DAEWOO Lynx 200B 2-axis CNC lathe is a robust and fast numerically controlled lathe with a slant bed and flat guides, compact in size. It is equipped with a FANUC 21-T CNC control unit with LCD monitor, year of manufacture 1998, and complies with CE standards. Main features: Max. swing over bed: 460 mm Max. turning diameter: 280 mm Max. turning length: 500 mm Max. bar capacity: 51 mm Csdpfx Asx Nqlisaxerd Spindle nose: ASA 6” Spindle: max. rotation speed 4,500 rpm Spindle motor power: 11 kW Turret: 10 positions Turning/boring tool size: 25×25 mm / Ø40 mm Tailstock: quill diameter 65 mm, quill stroke 80 mm – MT4 Machine weight: 3,500 kg The equipment includes the tailstock with programmable quill, tool presetting system, 3-jaw hydraulic chuck (which will be supplied in place of the manual chuck), and operating and maintenance manuals.