Used Pot Tape Drilling Machine for sale (65,224)

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting Csdpfx Adefg U Tie Ishc - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: used, Year of construction: 1996, functionality: fully functional, Alzmetall AX3 SV Pillar Drill Manufacturer: Alzmetall Type: AX3SV Year of manufacture: 1996 Cjdpfszy N Egox Ad Ishc Condition: good, used Speed range: 160 – 2250 rpm Drilling capacity (St60) 40 mm Chuck/tool holder MK 3 Spindle stroke 120 mm Overhang 293 mm Column diameter 115 mm Distance spindle-table min./max. 117 / 701 mm Feed rate 0.1 + 0.2 mm/rev Net weight approx. 270 kg Special equipment: - Automatic feed - Spindle guard

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - Universal dowel drilling machine with a swiveling drilling unit - With fully automatic control - With 2 safety pneumatic clamps - Drilling gear motor: 2.2 kW with 21 spindles - Spindle pitch: 32 mm - With integrated oil damping - Height adjustment: 80 mm - Drilling depth: 80 mm Weight: 420 kg Availability: available shortly Chodpfx Aozk N A Ted Isc Location: Röllbach

Condition: used, Technical details: number of spindles: 1000 bore capacity in steel (diameter): 32 mm bore stroke: 200 mm range of revolution per miute: 63 - 1000 U/min bore capacity in cast iron: 50 mm Codpfx Aow Th Nlod Ishc drill spindle - Morse Taper: MK4 spindle throat: 315 mm spindle distance: 475 mm number of drilling stations: 3 headstock adjustment: 280 mm feed:: 0,08 - 1,25 (9 Steps) mm/U distance between table/spindle: 710 mm table surface area: 450 x 560 mm total power requirement: 12,4 kW weight of the machine ca.: 3,1 t dimension machine xH: 2,15 x 1,40 x 2,65 m The previous owner removed a drill spindle with box from the gang drilling machine! *

Condition: used, bore capacity in steel (diameter) 23 mm Codpfx Adsyfwune Iehc throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Chedpfx Aegp Dyxsd Ioc Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min distance spindle /table 85 - 755 mm spindle taper MT 4 MK column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Chedpfx Aozl E Ubjd Ioc Original price, including accessories: approx. 20.000 euros Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: used, Year of construction: 1975, machine/vehicle number: 2622, functionality: unexamined, throat depth: 300 mm, Column drilling machine Alzmetall AB 35 S, serial no. 2622, year of manufacture 1975. Drilling capacity: Ø 35 mm, overhang: 300 mm. Cedpfx Aez A Uqwod Iohc Round drilling table with T-slots, height-adjustable, mounted on a round column with a base plate. Control panel with main switch and cutting speed chart on the drilling head. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading upon agreement. All information without guarantee.

Condition: used, Technical details: number of spindles: 4 bore capacity in steel (diameter): 2-16 mm bore stroke: 140 mm drill spindle - Morse Taper: MK 3 spindle throat: 280 mm spindle distance: 455 mm Codpfeu Idugox Ad Iehc headstock adjustment: 250 via Hand - Kurbel mm feed:: 0,08 - 0,12 - 0,20 - 0,31 / 4 steps mm/U feed:: automatic + manuell spindle speed:: 180 - 2000 / 8 steps U/min distance between table/spindle: min. 3x 140mm und 1x 260mm mm distance between table/spindle: max. 3x 700mm und 1x 820mm mm table surface area: 1800 x 350 mm table adjustment: 300 via Hand mm total power requirement: 6,3 kW weight of the machine ca.: 2,4 t dimension machine xH: 2,1 x 0,9 x 2,2 m Application: Drilling, countersinking; reaming and thread cutting. Each drill spindle has its own drive motor Equipment: Foot pedal/operation Hand crank *

Condition: excellent (used), Year of construction: 1972, machine/vehicle number: 42 473, Manufacturer: Meuser Type: M 70 R Year of manufacture: 1970 Condition: very good, fully functional Technical data: Cedpfelp Iqmsx Ad Iehc Overhang: 1800 mm Drill spindle mount: MK6 Drilling capacity, max.: 120 Table size: 2000 x 1100 mm Rotary table: 700 x 700 x 500 mm Weight: 8000 kg With support column Hydraulic and electrical diagrams are available.

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Codpezwg Tijfx Ad Ishc Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: used, bore capacity in steel (diameter) / mm Cedpfxsy Tbv Te Ad Iehc throat / mm bore stroke 70 mm total power requirement 0,9 kW

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm Cjdpfxeu Id Dze Ad Iohc table rotating: 360 ° base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable *

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 32 mm throat 280 mm bore stroke 110 mm spindle taper MT 3 table-size 340 x 400 mm turning speeds 210- 2600 U/min total power requirement 1,8 kW Chsdjxqrd Hopfx Ad Ijc weight of the machine ca. 325 kg dimensions of the machine ca. 950 x 450 x 1750 mm

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: workshop-inspected Fittings drilling head Drilling unit: 3/4 spindles Clamping cylinders: 2 Motor power: 0.8 kW Connection: 400/50 volts / Hz Chedpozk Nu Asfx Ad Iec Machine dimensions Length 950 mm Width 650 mm Height 700 mm Weight: 80 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Codpfx Adez I Dims Iohc Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system Chodpfxezy N E Hj Ad Ijc - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, bore capacity in steel (diameter) 14 /15 mm throat 180 mm bore stroke 70 mm turning speeds 420 - 2100 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm Chjdpfxjfg U Tgj Ad Isc total power requirement 0,5/1,0 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light

Condition: used, Drill and tapping machine FLOTT, type TBZ 15 GL Serial No. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle mount MK2 Overhang 195 mm Quill stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm, 18 steps Motor power 0.55 + 0.75 kW Power connection 380 Volt, 50 Hz Cedpfx Adodzp S Ns Ijhc - Drilling spindle speed controlled via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the drilling spindle - Drilling head height adjustment via hand crank with rack and pinion on the column - Tapping attachment with guide chuck and switchover for right-hand and left-hand threads - 3 guide chucks for right-hand threads 0.7mm + 0.8mm and 28G available - Tapping possible with and without guide chuck - 1 toothed chuck for drill bits Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base Space required L x W x H 700 x 350 x 1850 mm Weight 165 kg Good condition

Condition: excellent (used), Year of construction: 1999, bore capacity in steel (diameter) 36.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 120-900 / 240 - 1780 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm well-maintained condition (!!) current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed * with overload protection and electrical handle cross circuit Chedpfxey Agpqe Ad Isc - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German

Condition: used, Year of construction: 2011, Technical details: Cedpfxeyli Sfs Ad Iehc bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine approx.LxWxH: 0,73 x 0,56 x 0,22 m Heavy-duty, solid cast-iron construction Automatic gear lubrication via oil pump Smooth and quiet operation thanks to precision-ground gears running in an oil bath High spindle concentricity thanks to the hardened and ground main spindle Thread-cutting device up to M24 in steel Main switch and motor protection switch Mechanical quill feed, 2 stages: 0.1 / 0.2 mm/rev. Coolant system Adjustable drilling depth stop 18 spindle speeds from 50 to 1,450 rpm 9 selectable speeds via gear selector levers in combination with a two-speed motor *

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 140 mm taper MK 3 MK Chedsy N D Hyjpfx Ad Ioc table-size 380 x 360 mm feeds über Handrad turning speeds 85 - 1100 U/min total power requirement 1,3 KW weight of the machine ca. 0,27 t dimensions 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive

Condition: used, Year of construction: 1996, machine/vehicle number: 354-0, Item No. 25055 Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm - Drill spindle mounting: MK 3 - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm Codpfxjz Erfwe Ad Ijhc - Weight, approx.: 420 kg - Includes: - Right-hand / left-hand rotation - Quick-change drill chuck 1-13 - Lighting

Condition: used, bore capacity in steel (diameter) 13 mm throat 180 mm bore stroke 70 mm morse taper 3 MK table: 215 x 215 mm turning speeds 240 - 4000 U/min Chjdpfjwpltusx Ad Ijc engine output 0,7 kW column diameter 65 mm dimensions 650 x 250 x 800 mm weight 50 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: used, Second-hand machine Features and technical specifications: Drilling unit comprising a drilling motor with a holder for threaded drill bits with the option to accommodate 6 drill bits in accordance with the drilling pattern of which 5 are for a row of holes spaced 32 mm apart and 1 is offset to the rear at a distance of 32 mm from the Row of holes, e.g. for Häfele Varianta Chedpfxezk N Tro Ad Ijc with roller conveyors to the left and right of the drilling machine Availability: at short notice Storage location: 63934 Röllbach