Used Polystyrene Eps Recycling Pelletizing Plant Of Diamat for sale (6,763)

Condition: new, functionality: fully functional, Year of construction: 2025, A sand aggregate or gravel production plant is a facility where raw materials like sand, gravel, and other aggregates are processed to create various products used in construction and other industries. These facilities typically involve a series of processes to transform raw materials into the final products. Here is a general overview of the key components and processes involved in a sand aggregate or gravel production plant: 1. Mining and Extraction: - The process starts with the extraction of raw materials from quarries or mines. Heavy machinery such as excavators, loaders, and bulldozers are used to remove the raw materials from the earth. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. Hodpfx Aeq Nia Ioacsfn 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. 7. Quality Control: - Quality control measures are implemented to ensure that the final products meet the required specifications and standards. This may involve regular testing and analysis of the materials. 8. Environmental Considerations: - Sustainable practices and environmental considerations are crucial in the operation of a production plant. Measures such as dust control, water recycling, and rehabilitation of mined areas are often implemented to minimize the environmental impact. 9. Maintenance and Safety: - Regular maintenance of equipment is essential for the smooth operation of the plant. Safety measures are also critical to protect workers and ensure compliance with regulations. 10. Final Product: - The final products from a sand aggregate or gravel production plant may include various grades of sand, gravel, crushed stone, or other types of aggregates used in construction, concrete production, asphalt production, and other applications. It's important to note that the specific processes and equipment used in a production plant may vary based on the type of raw materials, the intended final products, and local regulations. Additionally, advancements in technology and sustainability practices may influence the design and operation of such facilities.

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! Hedpfx Aaju U Ad Rjcofn EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3

Condition: new, Year of construction: 2025, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher. Hfsdpfx Aaeq H Shcocsn

Condition: ready for operation (used), functionality: fully functional, 1 used residual concrete recycling plant Klärfix mobile 600 fully functional complete! incl. recycling water/agitator tank (incl. agitator) incl. control system Location: Eastern Germany available immediately Hsdpfx Ajxnar Teacsfn

Year of construction: 2025, condition: new, ‼️NEW FEATURE – NOW WITH SIEMENS TOUCH SCREEN‼️ For improved operation and control! Leasing is also available! Always with linear monthly payments and no increased final installment! Term 36 months. Rate factor 3.0694% Term 48 months. Rate factor 2.3697% Term 60 months. Rate factor 1.9456% IMPORTANT‼️ Currently, there are machines from China being offered on various platforms. Most CE certificates are counterfeit, and there is no EU conformity. The electrical systems are also usually not compliant with German regulations. Several clients have contacted us, asking how it’s possible to obtain copper from these machines, as they only get shredded cable mixtures. Based on our own tests two years ago, we can confirm that these machines do not produce clean copper. Such machines are not permitted for use in Germany! German quality, CE certified with EU conformity, and available for live demonstration. We recommend buying locally here in Germany: German warranties, German laws, fixed prices, and German-speaking support in case of problems – all only with machines purchased from us. You are welcome to arrange a site visit to see our quality in person. Live demonstrations available! For all recycling needs, we have shredders and other recycling machinery in stock in Heilbronn! Here is our new, unique machine – a world exclusive, only available from us in Heilbronn. Water-cooled system. Very efficient, clean copper granulate: 99.7% purity. We are a German company operating under German law. Excellent quality with warranty and service. Our German-speaking skilled workers, all certified, can assist you at any time. We have our own trucks, service vans, and offer prompt support and advice. See for yourself on site – don’t just decide based on pictures or videos. We granulate ourselves and can demonstrate this live. S300 with water cooling and fan – developed and assembled in Germany by us. With our equipment, you can also separate radiator copper: Input: ➡️ Copper-aluminum radiators Output: ➡️ Separated copper and aluminum. Any iron parts and screws are separated via magnetic belt as their own fraction (pre-shredder required). Since we use our own machines for copper recycling, our systems are continuously modernized, optimized for long service life, and constantly improved. Maintenance, spare parts, modifications, and upgrades are provided by our trained staff! From stranded wire, extension cables, automotive cables, telephone cables, NYM cables – recycle it all with our machines! Hsdpfx Aasp E Efcecsfn Granulation Plant S300 ➡️ For cables from 0.1–40mm ➡️ Up to approx. 250 kg/h input – meaning, with 50% copper content in the cable, you can recover 5kg of 99.7% pure copper granulate from 10kg of input, which can be sold at premium prices. ➡️ Total connected load: 24 kW ➡️ Including separation tables ➡️ 380-volt connection ➡️ UVV compliant, implemented by a German company ➡️ Conveyor belts included ➡️ Magnetic belt included (for steel separation) ➡️ Transport can be organized From €24,999.00 net +19% VAT €4,748.81 Gross €29,748.81 Subject to errors and prior sale.

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. Hfsdpfxexlif Ro Aacon This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Year of construction: 2024, operating hours: 10 h, condition: like new (used), Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. Hfjdstziudepfx Aacjn The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Condition: new, Year of construction: 2025, overall weight: 6,500 kg, warranty duration: 12 months, shaft diameter: 1,200 mm, power: 75 kW (101.97 HP), The ERP Series – Eco Recycling Plant is Mizar’s latest innovation in cable recycling, engineered to deliver maximum output with minimal energy consumption. This compact and high-performance system is built on two core components: the FGR – Fine Granulator and the DES – Densimetric Separator. Together, they offer an advanced, eco-friendly solution for high-purity metal and plastic separation. The ERP Series stands out with its low energy consumption, optimized material flow, and precise separation technology — all integrated within a space-saving design. Whether operating as a standalone system or as part of a larger line, ERP offers excellent efficiency without compromising quality. Hfodpfx Aexb A S Neacon Operators benefit from a smart PLC-controlled touch-screen interface, allowing real-time monitoring and simple operation. All components are CE-certified and manufactured with high-grade materials to ensure long-term durability and performance. The ERP Series is available in three sizes to fit diverse operational needs: ERP S1 , ERP M1 , ERP L1 With the ERP Series, you can achieve maximum recovery rates, superior material purity, and energy-efficient operation — all in one eco-conscious system.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system - Main engine extruder – 110 kw - Double degassing MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump Hjdpsuac Ugofx Aacofn - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Condition: used, functionality: fully functional, Year of construction: 1994, 1 used residual concrete recycling plant Year of manufacture 1994 Fully functional Hjdpfxew Sawfe Aacjfn Needs minor repairs consisting of Base machine Feeding table Winter enclosure (without control unit) from location near Fulda - Sold as is - subject to prior sale

Year of construction: 2025, condition: new, We also offer leasing and financing options. Feel free to ask us! ‼️ATTENTION‼️ Machines currently being offered by Chinese dealers on various portals often have fake CE markings. They do not comply with EU standards and are not electrically permissible in Germany. Several customers have contacted us, asking how to extract copper from such machines, as they only produce shredded cable mixtures. Based on our own tests two years ago, we can confirm: these machines do not yield pure copper. Operation of such equipment in Germany is not permitted! Buy from us and benefit from our expertise—see for yourself on-site in Heilbronn. We will support you for years and help you reliably separate quality copper. Your Josan & Söhne Team! German quality—CE certified, EU-compliant, and available for live demonstration—not just processed or edited videos. We strongly recommend buying locally here in Germany: German warranties, compliance with German laws, fixed prices, and German-language assistance for any issues. All this is exclusively provided for machines purchased from us. You are welcome to schedule an appointment and inspect our quality in person. Remember, videos can be edited—visit us for live demonstrations‼️ For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all necessary machinery from us. Feel free to inquire. ‼️CAN BE VIEWED ON SITE‼️ Our compact model functions just as efficiently as our larger models—just smaller and more affordable. Copper granulate, prime quality. Usable in any garage. Approx. 20-30 kg input per hour. From stranded cables, extension cords, automotive cables, telephone cables, NYM cables—you can recycle it all with our machines! Josan Cable Granulation System E30 We are happy to demonstrate the machine live in Leingarten—by appointment only! We are located in Heilbronn—a German company with German laws, warranty, and service! We also speak English! ‼️Please contact us if you have any further questions! We can only respond if you provide your name, address, email, and phone number. Otherwise, your inquiry may be filtered as spam. We will get in touch and advise you in advance!‼️ Here is our entry-level model: ➡️Operates on 380 V ➡️For cable diameters approx. 0.1-30 mm ➡️Power approx. 4.2 kW ➡️Input approx. 20-30 kg/h ➡️Weight approx. 310 kg ➡️Dimensions approx. 88×74×173 cm ➡️Equipped with accident prevention (UVV), implemented by a German company This system enables you to process cables for copper recovery. We also offer larger systems and accessories such as hydraulic cable cutters, electric motor splitters, triple separators, and more. Complete solutions for cable recycling. When you buy from us, you also buy our service! This is vital for these machines! PLEASE NOTE: Our service is only available for machines and accessories purchased from us. Hfodpfxsp E Efyo Aacjn Thanks to our know-how and machinery, you actually obtain copper granulate—instead of unseparated material. Net price: €8,999.00 + 19% VAT: €1,709.81 Gross price: €10,708.81 CE-certified machines from us. Errors excepted. Images, prices, and equipment specifications may vary.

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Hfsdpfx Aaoud Nx Hscsn Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, COMPLETE AUTOMATIC EPS-POLYSTYRENE PRODUCTION LINE (5 trucks/550 m3/12 hours) General information: Capacity: 5 trucks – 550 m3 / 12 hours Manufacturer: Made in Germany – Goettex GmbH Complete EPS production line for white and graphite material Includes all spare parts and accessories as well as pipework. Includes: - Block mould (transport carriage with chain conveyor, fully automatic cycle, touch panel, insulated, vacuum system) 2.67 m3, Height: 2080 mm – Width: 1270 mm – Depth: 1070 mm - Steam tank 5 m3 with parts Hfsdpfsvlw R Eox Aacjn - Working (loader) silo 1 for white material, automatic level control - Working (loader) silo 2 for gray material, automatic level control - Silo system with fully automatic level control (7 units) 86 m3 × 7 pcs, Height: 6000 mm with cone, Width: 4000 mm, Depth: 4000 mm - Pre-expander 1, capacity 1.1 ton/hour - Pre-expander 2, capacity 1.1 ton/hour - Mixing station 1 for white material, 17.5 m3 × 2, with 2 silos: 1850 mm × 1850 mm × 4000 mm - Mixing station 2 for gray material, 17.5 m3 × 2, with 2 silos: 1850 mm × 1850 mm × 4000 mm - Air tank (200 liters) - Octabin container holder (for 1 Octabin or 1 Big-Bag) - Cutting line with automatic wire adjustment, Complete line consists of 3 sections: 1) Block Start table 2) Vertical section 3) Horizontal section, with automatic wire adjustment, with EPS recycling grinder - Packing machine with ink printer, Cycle time: 12 sec/package, Film feed via 2 rolls up to 350 m3 – with Touch panel – Ink printer with 2 colors - Dedusting unit 1 for white recycling, connected to the grinder with powder flowing into the sack - Dedusting unit 2 for gray recycling, connected to the grinder with powder flowing into the sack - Compressor for all machines - Cooling tower for vacuum system All PLC and frequency inverters are SEW and Toshiba. With full pipe system. All fans and electric motors are integrated with frequency inverters and SEW gearboxes. The complete production line includes the processing of both white and graphite raw materials. Full software support and spare parts supply available. Relocation of the complete technology to the customer's site is performed by a professional company. After transport and assembly, full system commissioning and training are included in the price. 5-10 working days for 2 persons.

Year of construction: 2025, condition: new, ⚡ Processing Capacity ✔️ 1000-1500 kg/h Perfect for medium to high-volume operations. 🔁 Applicable Materials ✔️ All types of electrical cables ✔️ Mixed and contaminated cables ✔️ Complex, multi-layered cable structures 🔍 Included Machines & Functions Machine Functionality Shredder Primary size reduction for bulky cables Overbelt Magnetic Separator Ferrous metal removal with high-power magnets Granulator Fine and uniform size reduction Zigzag Separator Light/heavy fraction separation Densimetric Separator Density-based material classification Air Cyclone Separation of dust and light particles Turbo Mill Ultra-fine grinding for tough materials Hfedpfx Aewkflgsacjn 🔄 Key Advantages 🧩 Modular Design: Each machine operates independently 📈 Scalability: Easily expandable and reconfigurable 🧪 High Purity Output: Precise and clean material separation 🌱 Sustainability: Energy-efficient and environmentally friendly 🔧 Easy Maintenance: User-friendly design and accessible parts 🎯 Designed For Recycling companies seeking maximum efficiency Businesses aiming for high purity and low loss rates Operators needing flexibility and growth options

Condition: new, functionality: fully functional, power: 315 kW (428.28 HP), fuel type: electric, color: grey, Year of construction: 2025, Mobile impact crusher marble recycling crusher ( High Capacity ) Another practical stone crushing machine from our company that meets the different needs of our valued customers, Mobile primary impact crusher. It is possible to reach a capacity of 250 / 500 tph in non-hard mines and minerals. Hodpfx Aaowhnbrjcjfn You can easily increase the capacity of your quarry or recycling area in your new projects or already working. You can call us for our practical and innovative solutions for you.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, 1 piece brand new recycling plant Stetter RA 12 Hfjdpfxewq Sx Ts Aacsn Year 2024 Including feed table Exhibition machine Immediately available At a special price

Condition: used, Year of construction: 2025, Cable recycling systems - Pre-crushing machine After the cables are broken with the pre-crushing machine, we ensure that the cables going to the MLK series are broken again and copper and plastic are separated. Hfedpfx Astuumyeacen With the pre-crushing machine, both the capacity is increased and the machine works more efficiently. All of the blades in the crushing chamber are 2379 Bohler brand and have bidirectional sharpenable feature. As long as metals of different hardness are not thrown into the machine, the life of the blades will be longer. The separator on the chassis ensures that the metal and plastic are separated from each other in the most precise way with the original weight, vibro motors and airway.

Year of construction: 2025, condition: new, ⚡ Processing Capacity ✔️ 500–1000 kg/h Perfect for medium to high-volume operations. 🔁 Applicable Materials ✔️ All types of electrical cables ✔️ Mixed and contaminated cables ✔️ Complex, multi-layered cable structures 🔍 Included Machines & Functions Machine Functionality Shredder Primary size reduction for bulky cables Overbelt Magnetic Separator Ferrous metal removal with high-power magnets Granulator Fine and uniform size reduction Zigzag Separator Light/heavy fraction separation Densimetric Separator Density-based material classification Air Cyclone Separation of dust and light particles Turbo Mill Ultra-fine grinding for tough materials 🔄 Key Advantages 🧩 Modular Design: Each machine operates independently 📈 Scalability: Easily expandable and reconfigurable 🧪 High Purity Output: Precise and clean material separation 🌱 Sustainability: Energy-efficient and environmentally friendly 🔧 Easy Maintenance: User-friendly design and accessible parts Hedpownnmbofx Aacjfn 🎯 Designed For Recycling companies seeking maximum efficiency Businesses aiming for high purity and low loss rates Operators needing flexibility and growth options

Year of construction: 2025, condition: new, ⚡ Processing Capacity ✔️ 200–500 kg/h Perfect for medium to high-volume operations. 🔁 Applicable Materials ✔️ All types of electrical cables ✔️ Mixed and contaminated cables ✔️ Complex, multi-layered cable structures Hfodswnm Spopfx Aacon 🔍 Included Machines & Functions Machine Functionality Shredder Primary size reduction for bulky cables Overbelt Magnetic Separator Ferrous metal removal with high-power magnets Granulator Fine and uniform size reduction Zigzag Separator Light/heavy fraction separation Densimetric Separator Density-based material classification Air Cyclone Separation of dust and light particles Turbo Mill Ultra-fine grinding for tough materials 🔄 Key Advantages 🧩 Modular Design: Each machine operates independently 📈 Scalability: Easily expandable and reconfigurable 🧪 High Purity Output: Precise and clean material separation 🌱 Sustainability: Energy-efficient and environmentally friendly 🔧 Easy Maintenance: User-friendly design and accessible parts 🎯 Designed For Recycling companies seeking maximum efficiency Businesses aiming for high purity and low loss rates Operators needing flexibility and growth options

Year of construction: 2025, condition: new, Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: 1. What material you want to separate? Hfodpfxjchb Ruo Aacjn 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Condition: new, Year of construction: 2025, The system can be loaded onto a truck with a forklift and is ready for operation in just a few simple steps. A 16A socket is required. Total dimensions of the system LxWxH 3.5 x 1.06 x 2.98m (ready for operation) Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm-30mm, (bigger particles are possible with a special design) Hsdjfrugkopfx Aacofn

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. Hjdpfjwm Nq Esx Aacofn • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Hjdpfsu Thcvjx Aacjfn Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Hfodpfjvf E Avsx Aacen Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Hodeu Thkaopfx Aacefn Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.