Used Plunge Router for sale (635)

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Iijdpfx Ajw Idgveacjh Total number of tool changer positions: 14

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Ijdpfstuqlxsx Aacsih Scope of delivery: 1 PUmpe

Condition: used, Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: NetModule, WLRouter type NB1600-UW with 2 antennas -Antennas: WTG14, 114116 DM1 / WTG14, 114118 DM3 Iedpfoh Sza Djx Aaceih -Total dimensions: 340/200/H135 mm -Weight: 1.1 kg

Condition: ready for operation (used), Technical characteristics Router-tenoner equipped with tenoning carriage, work table extension and support bar Iodpfx Ask Rtg Nsacsih Working table dimensions : 1100 x 700 mm Max. tool diameter : 300 mm Router spindle diameter : 30, 40 and 50 mm Spindle vertical travel : 220 mm Motor : 7,5 kW Rotation speed: 2900, 4400, 6000 and 8000 rpm Machine with a specific protection housing for both uses (shaping and tenoning) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Overall dimensions Weight: 740 Kg

Condition: used, Year of construction: 2005, operating hours: 6,650 h, functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Bosh Rexroth, workpiece height (max.): 290 mm, workpiece weight (max.): 500 kg, table width: 1,300 mm, table length: 4,000 mm, rotational speed (min.): 1,200 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,500 kg, spindle speed (min.): 1,200 rpm, spindle motor power: 10,000 W, spindle nose: HSK63F, number of spindles: 1, number of slots in tool magazine: 15, tool length: 240 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, ArtisX6 BRIEF DESCRIPTION. 1 10 kW working electrospindle; constant power in the range of 12,000 to. 24,000 1/min; working range: 1200–24,0001/min. Tool socket: HSK63F. Axis working ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis= 360° Axis approach speeds: in the X/Y plane = 85 m/min; Z = 20 m/min Gateway: 290 mm 1 automatic disc tool magazine, 15-position. Max. tool length: 240mm, max. tool weight: 6kg L-shaped drilling unit, power 2.2 kW, spindle speed 4500 1/min, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm 2 x 4 pneumatically extendable base pins (fi 25 mm, stroke 115 mm). Iisdpfx Ajwh Aidsacjh Tool set: yes (including some never used) Table division into two stations for alternating work 1 vacuum pump with a capacity of 250 m3/h and a surge tank with a capacity of 500 l Machine safety (EU standard): BUMPER bumper system (without the use of mats, photocells, etc.) Bosch Rexroth PNC control, BTV 16 industrial PC computer, Pentium III processor, RAM 256 MB, HD 10 GB, network card Profibus SERCOS drive control system Data input: USB-Stick, local network Operating system: Windows2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Movable control panel with manual control panel Remote diagnostics Interpolation: 5 linear, 2 ½ D circular Connected power: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% efficient. Storage location: northern Poland

Condition: used, used, good condition Make Frommia Type FS60 GS tested Motor 3.2 kW Iedpfx Aajvwf Tfoceih Collet holder 6, 8, 12 Engine 2 speeds 12,000

Condition: used, machine/vehicle number: 008153, X axis working area: 3800 mm Y axis working area: 1560 mm Main Electrospindle power: 12 KW Iisdpfxsw Tiwke Aacsh Number of controlled axes: 5 axes Total number of drilling spindles: 29 Total number of tool changer positions: 18

Condition: used, 110067-4200, HaBa, screwdriver plunger Iiodour Spxjpfx Aacjh Model: 110067-4200 Condition: Used

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Iioder A Dm Ispfx Aacoh Flow rate 43 L/min Weight 1100kg The set includes a set of gaskets and consumables for the pump

Condition: used, Year of construction: 1973, Table dimensions 750x750 mm Motor output 1,5/2,2 kW reus 1200/1800 U/min Year 1973 used manufactured by Frommia type FS 60 built in 1973 Masch.-No. 3 / 22 motor 1,5 / 2,2 kW with postformer 2,8 kW 2 revs 1200 / 1800 U/min table size 750 x 750 stand range 600 mm Collet chuck with collets 16 mm required space ca. 1200 mm x 1200 mm x 1600 mm Iijdsvwf Upepfx Aacoh located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, machine/vehicle number: 008033, X axis working area: 5200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 19 Iiodpfjwvq Hmox Aacsh Total number of tool changer positions: 26

Condition: used, machine/vehicle number: 007929, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Iijdswgaz Ujpfx Aacsh Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 007916, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36 Iiedpfxswfxkxj Aacoh

Condition: used, machine/vehicle number: 007917, X axis working area: 5020 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Iiedpfowfxkrox Aaceh Number of controlled axes: 5 axes Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 007980, X axis working area: 2050 mm Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Iedpfx Aaswml Nkoceih

Condition: used, This listing is for the Thermo Scientific Finnpipette F1 Pipette 8 Channel The unit is in full working condition and is ready for immediate use The Thermo Scientific Finnpipette F1 manual pipettes designed for precision, ergonomics, and ease of use in laboratory settings. Available here in a multichannel configurations, the Finnpipette F1 caters to a wide range of liquid handling needs. Key Features Ergonomic Design: Lightweight handle with low plunger and tip attachment forces to reduce the risk of repetitive strain injuries (RSI). Silent Volume Adjustment: Features a silent and lighter volume adjustment mechanism with over 50% lower forces compared to earlier models. Secure Volume Lock: A secure volume setting prevents undesirable volume drift during operation. Simply lift the plunger up to set volume and press down to lock in place with minimum effort. Adjustable Finger Rest: The 120° adjustable finger rest accommodates both right- and left-handed users, allowing the hand to relax during pipetting cycles. Super Blow-out: 150% increase in air boost to ensure efficient delivery of micro-volumes and prevent capillary action in 50 µL models and below. Iisdpfjxl Ezhjx Aacsh Compatible Tips: Designed to work seamlessly with Thermo Scientific Finntip pipette tips for optimal performance.

Condition: used, Year of construction: 2008, total height: 1,450 mm, total length: 1,750 mm, total width: 1,500 mm, Empty weight: 750 kg Price: On request Iiedswp D T Tepfx Aacsh - Main motor power [kW]: 4 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: 108/1008-3 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 2017, EDGEBANDER WITH NUMERICAL SETTINGS WITH EDGE DRESSER (ROUTER) & ROUNDING UNIT Brand: SCM Type (Model): K 360 HP-T-ER1 Serial no.: AH/120944 Ref: 123304 Year: 2017 (Photos taken before overhaul, before functional tests & before cleaning) MACHINING CAPACITIES : - Height of panel to be machined: 8 - 58 mm Thickness 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum width of panel to be machined: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - StarTouch control - Predisposition for barcode reading - Ø800 mm unwind tray - Front extension - Easy size: digital positioning of infeed guide and feed height - Non-stick spray unit - Edge straightener (RT-V) 12000 rpm - Infrared panel preheating at infeed Isdpfx Ajrx S Ipoacjih - Gluing unit (VC-VM) with interchangeable glue container for 1 kg granules. Heating time 12 minutes Pneumatic pre-cutter Digitized positioning (pressing) with 3 rollers including 1 motorized and timed roller - Tilting butt-cutting aggregate 0-20° 12000 rpm - Digitized positionning top/bottom trimming unit with copying. Milling cutter 1/4 round 2 mm (or chamfer) 12000 rpm - R2mm rounding aggregate 12000 rpm with digitized positionn. - Scrapers R1&2 mm top/bottom with digitized positions - Straight scrapers top/bottom - Edge finishing spray device (Nebulization) OTHER FEATURES : - Grinder motors: 2x2 kW - Cutting motors: 2x 0.19kW - Up/down motor: 0.30 kW - Drive motor: 1.1 kW - Milling motor group: 2x 0.65kW - CE marking - Lockable contactor, Mushroom stops - Power supply: 380v. Three-phase 50 Hz - Pneumatic supply: 8-10 bars (max), dry air - Suction: 1x Ø100 and 5x Ø80 mm Heads: 780 m3/h Trimming 360 m3/h Scrapers 2x360m3/h Max. foreseeable footprint in running order : 10.80 x 2.40 m Transport dimensions (WxDxH) : 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with assembled tools, manual, spare parts list and drawings. On order, the machine will be overhauled and brought up to standard, with inspection and dynamic functional testing.

Condition: good (used), Condition: Used Stock number: 968859 State: Good Maximum diameter: 100 mm (4") Maximum length: 100 mm (4") Number of teeth: 6-400 Maximum pitch in steel: 15 D.P. 12 indexing tables Iedjxlabijpfx Aacjih Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal cut or plunge cut Main motor: 1.5 HP Coolant pump motor: 0.1 HP Hydraulic system motor: 0.1 HP Dimensions: 1120x1120x1680 mm Machine weight: 500 kg

Condition: good (used), Crosscut saw, pull saw, miter saw, plunge saw -Remark: Unit made of slats/blinds production, without control -Saw blade: Ø 188 mm Ijdop Dydqspfx Aacsih -Individual components: see photos -Dimensions: 1390/620/H1130 mm -Weight: 576 kg

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent Isdpfxjlht Hwe Aacoih F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: used, This listing is for the Akta Process Sample Pump The unit is in full working condition and is ready for immediate use ÄKTA Process Sample Pump & System Overview The ÄKTA™ P-960 sample pump is a precision component designed for use in ÄKTA™ chromatography systems, including ÄKTAprocess, ÄKTA pure, and ÄKTA avant. It facilitates accurate and low-pulsation sample application directly to chromatography columns or into sample loops. Key Specifications of the P-960 Sample Pump Maximum Flow Rate: 50 mL/min Maximum Pressure: 20 bar (2 MPa) Iodpjxhga Rofx Aacoih Operating Temperature: Up to 40°C Power Supply: 32 V DC Wetted Materials: ETFE, PEEK, PTFE, PFR, UHMWPE, titanium alloy, borosilicate glass, zirconia ceramic, Elgiloy Connection Ports: Male M6 (inlet), 1/16” finger-tight (outlet and pressure sensor) Features Low Pulsation Operation for consistent, reproducible flows Stepper Motor-Driven Plungers for precise sample delivery Flexible Sample Application: Supports both sample loops and Superloops Air Sensor Integration: Detects air bubbles, ensuring complete sample transfer and avoiding contamination Maintenance and Calibration Daily Calibration recommended using degassed liquids Rebuild Kit Available (Part # KDT-1811-9497-N) including check valves, pistons, and O-rings Back-pressure Limit: < 0.3 MPa during calibration

Condition: good (used), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Now available at our facility in Ireland: Mikron Gear Hobbing Machine Type 132-02 (M23) in very good condition. This precision Swiss-made machine is ideal for the production of small gears, toolrooms, and manufacturers seeking reliable, high-precision gear cutting capabilities. Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an outstanding solution for hobbing spur gears, helical gears, and splines with consistent accuracy. Condition: Used Stock number: 968859 State: Good Maximum diameter: 100mm (4") Maximum length: 100mm (4") Number of teeth: 6–400 Maximum pitch in steel: 15 D.P. 12 table revolutions Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal or plunge cutting Main motor: 1.5 HP Coolant pump motor: 0.1 HP Iodpfx Ajxlabceacoih Hydraulic system motor: 0.1 HP Dimensions: 1120 x 1120 x 1680 mm Machine weight: 500 kg

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm Iodpsi Am U Dsfx Aaceih max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, This listing is for the APV Gaulin T Series Homogenizer The unit is in full working condition and is ready for immediate use APV Gaulin T Series Homogenizer The Gaulin T Series homogenizers, developed by SPX FLOW under the APV brand, are high-pressure, positive displacement reciprocating plunger pumps designed for demanding applications in industries such as dairy, food and beverage, pharmaceuticals, chemicals, and cosmetics. Key Features High Pressure Capability: Models like the Gaulin 132T and 125T can handle pressures up to 600 bar (approximately 8,700 psi), making them suitable for applications requiring intense homogenization. Flow Rate: These homogenizers can process flow rates ranging from 1,000 to 25,000 liters per hour (LPH), accommodating various production scales. Design Options: The Gaulin T Series offers both mono-block and three-piece valve housing designs, allowing for flexibility in maintenance and customization. Hygienic Construction: Constructed with stainless steel or duplex materials, these homogenizers feature 3-A sanitary design, making them suitable for hygienic applications. Iiedpfxexhf Tve Aaceh Maintenance-Friendly: The design includes features like hydraulic valve actuators, easy access to key components, and modular electrical controls, simplifying maintenance and reducing downtime. Applications Gaulin T Series homogenizers are ideal for applications such as: Dairy Processing: Homogenization of milk, cream, and other dairy products. Food and Beverage: Processing of sauces, dressings, and beverages. Pharmaceuticals and Cosmetics: Manufacturing of emulsions, creams, and lotions. Chemical Processing: Production of paints, coatings, and other chemical products