Cnc-processing center

WINTER ROUTERMAX 1230 ALL-ROUNDER

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Gjdpfx Aaofk Ailsyekf For more information, follow the link:

Condition: new, color: white, IVECO 70C18, Euro 6, New, White, Wheelbase 3450, manual gearbox, PTO, differential lock, air conditioning, reinforced rear leaf springs, leaf spring, sprung driver's seat, fog lights, central locking with alarm and remote control, DAB radio, stabilizer bar, torsion bar, full optional Godpfx Aaovuy U Eeyjkf

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gsdsw Dc Niopfx Aayokf Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: new, table height: 650 - 1050messurements (LxWxH): 2980 x 1480 x 650 bis 1050mmtable width: 1480table length: 2980weight approx.: 945This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Gksdpfefk Ainjx Aayef For more information please follow this link:

Condition: good (used), Code: 0432 Brand: STETON Model: STP - CE Standard Automatic hydraulic clamp with mobile beam for wooden frames, frames and various - CE Standard Technical data: Useful working capacity mm 3000 x 2000 N° 2 horizontal cylinders diameter mm 50 - 1300 Horizontal stroke kg 5000 N° 2 vertical cylinders diameter mm 80 - 1100 Horizontal stroke kg 13000 Max pressure kg/cm2 160 Motor Kw 2,2 N° 3 positions of support bar N° 7 positions of horizontal reference stops Automatic control board Overall dimensions mm 3900 x 1200 x 2680 h Gjdpfx Asu N E Rxjayskf Weight kg 1800

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP + IMAwinCAD Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450 - DYNAPOINT Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Gksdotixpuspfx Aayjf Max. useful working area (X - Y - Z) mm 6300 x 1450 x 100 Min. workpieces dimensions (X - Y - Z) mm 320 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 5600 x 2100 x 38 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 34 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 18 (S6) Circular Grooving Saw (90°) diam. (mm) 200 Edge Banding unit (always ready on board) - VT 100 Edge coils supporting unit (No. 2 reels) Combined aggregate (Flush-Trimming/Scraping) Workpieces Infeed system (to the Bima Cut) with Brush Table N° 6 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) Workpieces Outfeed (from Bima Cut) With motorized Rollers + Angular Transfer System

Condition: new, number 31 Positionen 22 mm condition neu weight 43 kg Set 1 33-piece, 22mm system, consisting of: Gkedpsulbb Rofx Aayjf Clamps: 4 x 220610.1 Clamps 2 x 220630.1 Bolt: 12 x 220511 Stop: 4 x 220410.N Stop: 4 x 220420.N Angle: 2 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport.

Condition: ready for operation (used), controller manufacturer: Siemens 840DSL, total height: 3,325 mm, total length: 5,520 mm, total width: 3,320 mm, empty load weight: 10,000 kg, nominal power: 50 kW (67.98 HP), 5-assig simultaan bewerkingscentrum Type: K3X8F max. werkstuk: dia 700 mm max. werkstukgewicht: 300 kg afstand spilneus / boventafel: 525 mm A-as (kanteling): +30°/-180° C-as (rotatie): 360° continu snelle bewegingen: 50.000 mm/min hoge druk koeling door spindel spaantransportband trillingsbewaking lasertoolsonde Blum Micro werkstuktaster Blum TC52 met Fanuc Robot laadsysteem RB: Robot: A05B-1330-B205 (Fanuc Robot R-1000iA/100F) Controller: A05B-2601-B112 (Fanuc-systeem R-30iB) Max longitudinal travel X-axe: 780 mm Max cross-travel Y-axe: 700 mm Max travel Z-axe: 500 mm Admission in millinghead: HSK 63A Gkedpowznxdjfx Aayef Spindlespeeds: 16 000 rpm Table size: dia 500 mm Toolholder: yes Number of tools: 36 toolpositions

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 2,100 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 300 mm, controller model: XINJE, overall weight: 2,500 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 9,000 W, input voltage: 400 V, control type: NC control, Danibrum ROD Line CNC Router – Complete Industrial Solution for Precision Nesting Gkedpfxowpttpo Aayjf The Danibrum ROD Line CNC Router is a professional-grade machine, designed for large factories and industrial manufacturers who demand efficiency, reliability, and high-precision machining. Built for nesting and panel cutting operations on chipboard, MDF, and solid wood, the ROD Line provides a robust, configurable platform ideal for automated production environments. Optimized Working Area for Industrial-Scale Production The standard working area of 2100 x 3000 mm allows for the processing of large panels without repositioning. The welded steel frame ensures structural rigidity, while HIWIN linear guides guarantee smooth, stable, and precise motion. Powerful Motor and Automatic Tool Change Equipped with a 9 kW spindle motor and a 12-position automatic tool changer, the ROD Line enables the seamless execution of complex tasks such as contour cutting, grooving, milling, and drilling — all in a single uninterrupted cycle. Industrial-Grade Speed and Accuracy The X-Y axis transmission features helical rack and pinion drives, while the Z axis employs a TBI ball screw for sub-0.01 mm repeatability. With a top travel speed of 80 m/min on X and Y, this router is engineered for high-output production cycles. Intuitive CNC Control and Broad Software Compatibility The machine is powered by the NC Studio control system, running on Windows OS, and is compatible with industry-standard CAM/CAD software such as Type3, ArtCAM, and Fusion360. The user interface is simple yet professional, supporting high-level production workflows. Optional Automation Features For automated production lines, the ROD Line can be optionally equipped with an automatic loading/unloading table — significantly reducing handling time and increasing operational throughput. Versatility and Custom Configuration The router offers customizable working dimensions, making it highly adaptable to various production layouts. It efficiently processes melamine-faced chipboard, MDF, solid wood, and composite materials. Key Advantages Heavy-duty industrial build for intensive operation High precision and excellent surface finish Automatic tool change system for efficiency Extensive software compatibility Optional integration with automated production lines The Danibrum ROD Line CNC Router is a critical step toward the digital transformation and industrial optimization of wood processing. It is the complete solution for workshops and factories aiming for high performance, reliability, and flexibility in line with modern market demands.