Used Plastic Shredder for sale (7,176)

Condition: used, Year of construction: 2006, Bruks drum chipper Pgedpfx Agexr Trno Dew Model 820CM Year of manufacture: 2006

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Pedpow U Txuofx Ag Dogw Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: good (used), Year of construction: 1998, High-performance shredder with 1.2 m rotor width Large rotor diameter of 368 mm with 64 blades Podpoxwwvusfx Ag Djgw 37 kW motor Engine and gearbox replaced 6 years ago

Condition: new, Technical Data: - Hopper opening: 1850 x 1250 mm - Hopper volume: approx. 3.0 m3 - Rotor diameter: 500 mm - Rotor length: 650 mm - Rotor speed: 80 rpm - PLC control - Motor–gearbox: 18.5 kW - Control cabinet (completely wired) incl. 5 m cable - Automatic star-delta start - Weight: 3600 kg - Performance depends on material Main applications and processable materials: - Recycling and volume reduction of non-ferrous metals - Recycling and volume reduction of wood waste - Recycling and volume reduction of plastics and foam / Styrofoam Podjwb Sdqopfx Ag Degw - Recycling and volume reduction of electric cables and coils - Recycling and volume reduction of plastic containers and composite materials

Year of construction: 2020, condition: ready for operation (used), General Data Pjdpfx Agjxlll He Dogw Machine weight 19300 kg Additional Equipment Oscillating Mounts for Machine Mounting / Hydraulic Screw Anti-Rotation Lock / Hydraulic Screw Drive with Standard Speed / Pneumatic and Hydraulic Cascade Valves for Hot (Cold) Channel Needle Valve / Service Unit Combination for Compressed Air Preparation / Nozzle and Ejector Chamber Control and Monitoring Systems / Support for Clamping Unit on Foundation / Widening of Mold Clamping Platens / Manual Ejector Coupling System / Chrome-Plated Tie Bars / Internal Oil Filtration in the Bypass Flow This Krauss Maffei 300-1400 CX MC6 was manufactured in 2020. It features a hydraulic screw drive, oscillating mounts for stability, and a comprehensive service unit for compressed air preparation. The machine supports high weight loads with its robust clamping unit and has chrome-plated tie bars for durability. Consider the opportunity to buy this Krauss Maffei 300-1400 CX MC6 plastic processing machine. Contact us for more information about this machine. Application Types Other Plastic Processing Machinery

Condition: refurbished (used), Year of construction: 2018, operating hours: 4,865 h, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F Pgsdpfxexxb Uws Ag Dsw Year of manufacture: 2018 Operating hours: 4,865 Engine: Mercedes MTU, 490 HP 42 teeth AdBlue Crawler chassis Remote control Overband magnet Weight: 30,000 kg Machine is overhauled and immediately available.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, overall weight: 950 kg, warranty duration: 12 months, power: 7.5 kW (10.20 HP), input current: 32 A, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Mercodor shredder ZM 44 complete machine with safety devices and switches. Siemens PLC control with overload protection etc. Machine with a cutting area of 500x380 mm knife 14 mm 3 hooks drive 7.5 KW. Psdpfx Agsiv Sr No Djgw

Condition: used, HERBOLD single-shaft shredder EWS 45/200 Pgedpjxgtp Ajfx Ag Dsw With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: good (used), Year of construction: 1998, Shredder with 1 m rotor width, ideal for pallets. Rotor diameter 300 mm with 24 knives. 22 kW motor. Equipped with discharge auger. Extraction connection 250 mm. Screen perforation 25 mm. Pgodoxzpzdopfx Ag Djw

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5020, power: 45 kW (61.18 HP), Stationary wood chipper with 45 kW electric motor. The Hackkontrol HC 960 control system was replaced two years ago. This control regulates feed-in when the speed drops and can be adjusted as needed. The wiring in the connection box was also overhauled two years ago, so the chipper can be connected using a cable with a minimum of 100 Ah, preferably 125 Ah, and can be put into operation directly. The chipper is robustly constructed and fully operational. Machine documentation is available and spare parts are still readily obtainable. Pjdpfxexy Rrzs Ag Degw

Condition: excellent (used), functionality: fully functional, WOOD SHREDDER machine model MION e MOSOLE TR 2 second hand machine machine operation in automatic and/or manual mode working condition : Excellent In automatic mode, the motor starts in the opposite direction to free the pusher from any residues from previous work. after about 5 seconds ( in fully automatic mode ) the motor stops and restarts in the correct direction for continuous processing (see the video). technical details : hydraulic pusher lengthh rotor mm.700 rotor diameter mm.300 rotation speed of the rotor rpm 100 hopper content 3,42 m³ main motor power Hp 25 (kw 18) Pedpjw Hwpvofx Ag Djgw hydraulic power unit motor pusher Hp 1 interchangeable knives Feeding from top

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Pgjdjxbyx Tjpfx Ag Djw Full load current: 32 amp Main fuse: 35 amp

Condition: reconditioned (used), Year of construction: 2016, overall weight: 45,000 kg, power: 566.33 kW (769.99 HP), Mobile Shredder on tracks LINDNER UUraco 95 DK. Pgsdpjw Ip Skefx Ag Dow Diesel engine (770 HP) new approx. 3.000 hours ago. Tilting hoppe, discharge conveyor, overband magnet, radio remote control.

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation Pgodpfxoxgq S Ue Ag Djw

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below Pgedpfx Agjp H Sv Ds Dsw

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Pgedpfev Sqrpex Ag Dew Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: used, Double-shaft shredder Podpfxjxgtcve Ag Dsgw Drive 37.50 KW

Condition: good (used), Year of construction: 2006, Chipper with rotor width 800 mm Rotor diameter 368 mm with 40 knives Pgedpfx Agjxyud Io Dew Motor 22 kW Only 850 operating hours

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control Psdpfx Agjdwktko Dogw - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Pedexgtdaepfx Ag Dogw Rotor diameter: approx. 560 mm

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net Pgjdpfegmfa Aex Ag Dew - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months Pgsdpfx Aged Dgw Uo Dew MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Year of construction: 2023, condition: new, Machine in preproduction machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm Pgodpfodv Eu Hsx Ag Dew hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net Psdpfx Agod E R D Sj Degw - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Psdpfx Agjd Hkqhe Degw Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear