Used Plastic Molding for sale (6,255)

Condition: like new (used), Year of construction: 2023, operating hours: 1,900 h, clamping force: 1,600 kN, screw diameter: 105 mm, clearance between the columns: 18,701,420 mm, displacement volume: 4,546 cm³, total length: 13 mm, total width: 4 mm, total height: 3 mm, overall weight: 83 kg, pressure: 1,778 bar, 8 hot runner channels 16 sequential pneumatic valves 2 air blowers SERVO PUMP PC MC6 WEIGHT 83T DISTANCE BETWEEN PLATENS 3400MM Kdedpoy I Apqjfx Aifjl

Condition: repair required (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X27054, clamping force: 2,000 kN, screw diameter: 62 mm, Used Stork IMM 2000-1450 injection molding machine. The machine still needs to be tested and repaired. Kjdpfx Aiewhlddofedl

Condition: repair required (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X29324, clamping force: 2,500 kN, screw diameter: 62 mm, Used Stork IMM 2500-1450 injection molding machine. Kodpfx Aswhlk Dsifsdl The machine still needs to be tested and repaired.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: X46028, clamping force: 4,400 kN, screw diameter: 84 mm, Used Stork IMM 4400EP-5650-065 injection molding machine. The machine still needs to be tested and repaired. Kodpfxswhmvno Aifjdl

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Kjdpfx Aiowhkfyefodl

Condition: used, Motor, 1FK7060-5AF71-1DU5-Z, 4 available. Motor, 1FK7100-5AF71-1AG0, 2 available. Motor, 1FW3204-1GN72-5CK0-Z, 1 available. Motor, 1FW3204-1GY72-5CK4-Z, 1 available. Motor, 1FW3204-7GN01- 4GY7-Z, 2 available. Display, 2 available. Kdjdpfsrbzx Rsx Aifsl Siemens line filter for 120 kW Act, 6SL3000-0BE31-2AA0, 1 available. Siemens Simodrivo Drives, 6SN1111-0AA00-1FA0, 1 available. Siemens single motor module, 6SL3126-1TE32-0AA0, 3 available. Siemens single motor module, 6SL3126-1TE31-3AA3, 1 available. Siemens double motor module, 6SL3126-2TE21-0AA0, 2 available. Siemens active line module, 6SL3136-7TE31-2AA1, 2 available. Siemens sinamics sensor module SMC20, 6SL3055-0AA00-5BA1, 6 available. Siemens motor module, 6SL-3126-1TE31-3AA0, 1 available. Siemens motor module, 6SL-3126-1TE32-0AA4, 1 available. Siemens motor module, 6SL-3126-1TE21-8AA0, 2 available. Siemens control unit, 6SL-3040-0MA00-0AA1, 2 available. Siemens simodrive drives, 6SN1111-0AA00-1FA0, 1 available. Motherboard

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Kjdpfewhk Iuex Aifsdl

Condition: repair required (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: X34129, clamping force: 3,300 kN, screw diameter: 62 mm, Used Stork IMM 3300-2150-065 injection molding machine. The machine still needs to be tested and repaired. Kjdowhluijpfx Aifjdl

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Kdedsygk Eiopfx Aifjl

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: X66932, clamping force: 6,600 kN, screw diameter: 98 mm, Used Stork IMM 6600-8650R injection molding machine. Kdjdewhnciopfx Aifsl The machine still needs to be tested and repaired.

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 Kjdpfxjy Ir Nyj Aifjdl - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: used, Year of construction: 2012, Automated system / Application area: Chrome plating, nickel plating, copper plating / Programs: Pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Product window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per carrier, cycle time 3.00 min. per system, cycle time 2.50 min. for demetallization / Capacity: 20 carriers per hour, clear anode spacing (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entry dimension 550 mm in travel direction, 3100 mm in width, tank dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: transport system 133 kW, filters 194 kW, exhaust air 229 kW, wastewater treatment plant 150 kW, switching systems 704 kW, rectifiers approx. 3190 kW, heating energy approx. 1410 kW / Consisting of: automated loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths and exhaust system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating plant since 2015! Kdodpfx Aey Rvtusifol

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 8200 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Servomotor Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Interface for robot according to Euromap 67 Kdsdpfjy Nlb Sex Aifjl - 8 x hotrunner controller

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Kdjdpfxsy Hki Ae Aifsl Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Kjdpfx Aeu E Id Tsifodl Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun

Year of construction: 1999, condition: used, Plastic shredder Kdjdpfxey R D Iaj Aifol

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz Ksdpfedzqnyjx Aifedl - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Ksdpfx Ajyxhaisifedl Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels

Condition: used, Year of construction: 2021, functionality: fully functional, Bespoke Hot Table, we built to cast hot polyurethane components, we were holding tool temps at 110 degrees to cast the parts. So perfect for molding casting or curing. Also with close down sides to protect the bed when not in use. Heat Transfer Oil S2 machined Aluminum table with oil ways for circulation we found to be much more efficient than electric. Using a Tool Temp TT-181 reconfigured for oil usage - directly by Tool Temp temperature 0-150 degrees ( we have never tried higher) Circulation cut off valve for flow and return Heat Pipes changed before decommissioning Spare pump connectors provided Being sold as the department has closed and the machine is no longer required. Sizes Heated Bed 600mm wide x 1800mm long x 60mm thick Bed Height 930mm Table sizes 660mm Width 1860mm total length Closed Height 970mm Ksdjxpxmxepfx Aifsdl Full working condition - Ex works Aylesbury Buckinghamshire England, we can export at a additional cost. Can be seen working

Condition: used, Year of construction: 1998, operating hours: 98,806 h, clamping force: 40,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 255,000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year 1998 For sale are two identical injection moulding machines manufactured by KraussMaffei, model KM 4000-19000 MC equipped with MC3F control system. These machines are particularly suitable for producing large plastic components that require very high clamping force. The systems are fully equipped and include several peripheral devices for material feeding and process control. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control: MC3F * Year of manufacture: 1998 Ksdpfjyt Hy Njx Aifedl * Operating hours: approx. 98,806 h * Clamping force: 40,000 kN * Maximum shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Available Machines * Machine No. 14 * Machine No. 15 The machines can be purchased individually or as a package. Inspection by appointment is possible.

Condition: used, Year of construction: 1998, operating hours: 99,161 h, clamping force: 32,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 230,000 kg, # Sales Description A high-performance injection molding machine from the German manufacturer KraussMaffei is available for sale. This is the KM 3200-19000 MC model, specifically designed for the production of large-sized plastic components and industrial series manufacturing. The machine offers very high clamping force and is particularly suitable for applications involving technical plastic parts or large-scale items. The machine features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g. This allows for the efficient production of large parts with high material requirements. In addition, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included in the package. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance Kjdpfx Aioyt H Dhefedl * Clamping force: 32,000 kN * Screw diameter: 130 mm * Max. shot weight: 8,100 g Dimensions and Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm * Machine height: approx. 4,200 mm The machine represents a robust and proven solution for industrial plastics processing and is especially suitable for manufacturers requiring large-format injection molding capacity. Further information, photos, or inspection appointments are available upon request.

Condition: used, Year of construction: 1998, operating hours: 101,215 h, machine/vehicle number: 23J01415, clamping force: 23,000 kN, injection weight: 6,100 g, total length: 4,500 mm, total height: 3,800 mm, overall weight: 205,000 kg, # Sales Description Two high-performance injection molding machines from the renowned manufacturer KraussMaffei are available for sale. These are KM 2300-14700 MC models, specifically designed for the production of large-volume plastic parts and industrial series manufacturing. Each machine offers a clamping force of 23,000 kN, equipped with a screw diameter of 105 mm and a maximum shot weight of 6,100 g—ideal for applications involving large components and high material throughput. Kdjdpfxjyt Hide Aifel Both units are provided with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also part of the package. The machines originate from the years 1997 and 1998 and have been operated in an industrial production setting. Technical Overview: Machine 1 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) - Year of manufacture: 1998 - Operating hours: approx. 101,215 h Machine 2 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) - Year of manufacture: 1997 - Operating hours: approx. 99,030 h Shared technical data: - Clamping force: 23,000 kN - Screw diameter: 105 mm - Max. shot weight: 6,100 g - Machine weight: approx. 205,000 kg - Machine dimensions: - Depth: approx. 4,500 mm - Height: approx. 3,800 mm These machines deliver a reliable and field-proven solution for industrial plastics processing, making them especially attractive to companies seeking large-format injection molding capability.

Condition: used, Year of construction: 2018, Serial No. 221921, Control unit by Engel, Type CC300, Clamping force 1,700 t, 2 injection units, rotary table, minimum/maximum mold height 800 - 1,600 mm, platen distance 3,350 mm, clear horizontal/vertical opening 1,850 / 1,415 mm, 16 cascade controllers, 64 hot runner zones, core pulls hydraulic 4 (moving side) / 4 (fixed side), screw diameter 105 / 50 mm, injection weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control by Oni, Type Rhytemper FlexControl 32, 4x 8-circuit block modules 125 °C, 6-circuit block module 125 °C, visualization unit, extraction handling by Engel, Type Viper 60, 5 axes (X,Y,Z,C,B-Axis), nozzle spacing 300 mm, year of manufacture 2018, Serial No. 221938, part enclosure, outfeed conveyor, mobile conveyor by Engel, Type BGR FB100 KMAT, year of manufacture 2018, Serial No. 2144098, L approx. 4,200 mm, W 1,000 mm, external temperature control unit and material dosing not included in this offer. Damage: Hydraulic hoses leaking. Kjdpfxey I R Tqo Aifsdl

Condition: used, Year of construction: 2018, Serial No. 221920, Control system: Engel, Type CC300, Clamping force: 800 t, 2 injection units, rotary table, minimum/maximum mold height: 500 - 1,100 mm, platen spacing: 2,100 mm, clear opening horizontal/vertical: 1,170 / 1,000 mm, 8 cascades, 48 hot runner zones, core pulls hydraulic: 2 (moving platen) / 4 (fixed platen), screw diameter: 80 / 60 mm, shot weight: 1,800 / 250 g, operating hours: 28,236, machine weight: 30,000 kg, mold temperature control unit: Oni, Type Rhytemper FlexControl 30, 3x 8-circuit block modules at 125 °C, 6-circuit block module at 125 °C, visualization unit, handling system: Engel, Type Viper 20 (X, Y, Z, B axes), nozzle distance: 300 mm, year of manufacture: 2018, Serial No. 221937, parts enclosure with conveyor belt: Engel, Type BGR FB100 KMAT, year of manufacture: 2018, 2102958, length/width approx. 3,500 x 800 mm, external temperature control unit and material dosing not included in the scope of supply. Ksdpfx Aijy I R Inofodl

Condition: used, Year of construction: 2018, Ser. No. 221903, Control system, Manufacturer: Engel, Type: CC300, Clamping force: 400 t, Installation height: 450 - 950 mm, Plate distance: 1,450 mm, 8 cascades, 24 hot runner zones, hydraulic core pulls: 2 (DS) / 4 (AS), screw diameter: 60 mm, shot weight: 750 g, operating hours: 30,738, machine weight: 24,100 kg, mold temperature control, Manufacturer: Oni, Type: Rhytemper FlexControl 8, 2x 4-fold block modules 125 °C, visualization unit, extraction handling unit, Manufacturer: Engel, Type: Viper 20 EP8, 5 axes (X,Y,Z,C,B axis), nozzle distance not applicable for single-component, Year: 2018, Ser. No. 221917, part enclosure, belt discharge conveyor, Manufacturer: Engel, Type: FL4600 B600HLI, Year: 2018, Ser. No. 2101471, external temperature control unit and material dosing not included in this position. Kjdpfxey I Rxms Aifedl