Used Plastic Molding for sale (6,736)

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Cabin protection: Fully enclosed cabin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Footprint: 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Cgedpfx Afsyf Hfponjn Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

Condition: used, Year of construction: 2017, operating hours: 35,502 h, functionality: limited functionality, machine/vehicle number: 1207Q036, clamping force: 4,000 kN, screw diameter: 80 mm, clearance between the columns: 700 mm, displacement volume: 2,010 cm³, injection pressure: 162 bar, injection weight: 1,890 g, mold height (min.): 245 mm, ejector force: 111,000 N, ejector stroke: 205 mm, opening stroke: 655 mm, total length: 7,700 mm, total width: 1,950 mm, total height: 2,240 mm, overall weight: 15,500 kg, heating capacity: 24.5 kW (33.31 HP), pump power: 37,000 W, Equipment: documentation/manual, 400 Tonne Borche machine less than 10 years old. General good condition with some small wear on a couple of toggle pins. Report on machine status and video of the machine running available on request. Cgjdpfjyftl Ajx Afnsn

Condition: reconditioned (used), functionality: fully functional, clamping force: 220 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Cjdpoyfphaefx Afnjgn Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22MA machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Cgjdpfex U Ay Nox Afnon Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: refurbished (used), operating hours: 42,000 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 2,430 mm, total width: 810 mm, total height: 1,620 mm, Our team are currently working on the refurbishment of this BOY 22M injection moulding machine. This machine is fitted with a 24mm screw. BOY machines are very popular due to their small footprint. Any machines awaiting or undergoing refurbishment by us can be reserved with a 10% deposit. As this machine is already underway, you can expect this machine to be fully refurbished by our in-house experts within a matter of weeks. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person. Csdpfox U Axfsx Afnsgn

Condition: good (used), - 10 stainless steel silos - Brand: AZO - Previously used for: PVC powder - Condition: The silos have always been stored indoors and are in very good condition. Technical details: • Capacity: 12 metric tons / approximately 7.2 m³ • Each silo equipped with vibrating discharge base • Each silo equipped with discharge valve (rotary valve) • Provided with pneumatic conveying pipe Price per silo: €4,750 Ex Works, Rotterdam region Payment terms: 100% prepayment before delivery The silos are offered as is, where is, loaded onto truck Single unit purchase possible Available while stocks last The silos will be professionally dismantled by Plastima Used Machinery and partner; after dismantling, they will be ready for collection for your own transport or we can arrange shipping on behalf of Forbo. Collection/shipping can be scheduled between January 12, 2026 and February 16, 2026. Cedox E U Hcopfx Afnsgn If you would like to inspect the silos, we would be pleased to arrange an appointment with you.

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Pump motor 18.50 KW Cedpevu Dncsfx Afnsgn Weight 7,400 KG

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Cooler: Termo TEK Termochiller 1100 The following upgrade has already been performed : Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialice: Magics RP 9.0 Csdpjf Ey Eajfx Afnsgn Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: used, Year of construction: 2021, functionality: fully functional, Bespoke Hot Table, we built to cast hot polyurethane components, we were holding tool temps at 110 degrees to cast the parts. So perfect for molding casting or curing. Also with close down sides to protect the bed when not in use. Heat Transfer Oil S2 machined Aluminum table with oil ways for circulation we found to be much more efficient than electric. Using a Tool Temp TT-181 reconfigured for oil usage - directly by Tool Temp temperature 0-150 degrees ( we have never tried higher) Circulation cut off valve for flow and return Heat Pipes changed before decommissioning Spare pump connectors provided Being sold as the department has closed and the machine is no longer required. Csdexpxmxspfx Afnjgn Sizes Heated Bed 600mm wide x 1800mm long x 60mm thick Bed Height 930mm Table sizes 660mm Width 1860mm total length Closed Height 970mm Full working condition - Ex works Aylesbury Buckinghamshire England, we can export at a additional cost. Can be seen working

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Cgjdpfx Afsyglw Tenjn Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Condition: good (used), Year of construction: 2011, clamping force: 650 kN, screw diameter: 22 mm, displacement volume: 42 cm³, injection pressure: 2,864 bar, BATTENFELD HM 65-130 Stock no.: 503671 Manufacturer: BATTENFELD Model: HM 65-130 Control unit: UNILOG B6 Year of manufacture: 2011 Technical Data – Clamping Unit Clamping force: 650 kN Tie bar spacing (H x V): 370 x 320 mm Platen size (H x V): 550 x 500 mm Min. mold height: 225 mm Cgodpfjyglwmsx Afnen Max. mold height: 675 mm Max. platen daylight: 675 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 26 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Max. mold weight: 600 kg Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 41.8 ccm Injection pressure: 2,864 bar Screw L/D ratio: 20 l/d Screw stroke: 110 mm Screw speed: 398 rpm Screw torque: 238 N·m Free-flow shot weight (PS): 61 g/s Number of heating zones: 4 Nozzle stroke: 47 mm Dimensions & Weight Machine dimensions (L x W x H): 3.5 m x 1.4 m x 2 m Total weight: 3,000 kg Equipment Control panel language: German Hydraulic core pull: 2x Air valve: 1x Leveling elements Ethernet interface EUROMAP 13 interface Interface for temperature control unit Tool heating circuits: 6x

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Cgedeyglvpjpfx Afnen Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x

Condition: excellent (used), Eos EOSINT We are offering an Eos EOSINT plastic laser sintering system for sale. The EOS P380 system includes the following components: Build chamber container Powder container Cgsdpfegqux Nsx Afnsn Overflow container 3DM 8-zone process chamber heater, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Build volume: 350mm x 350mm x 610mm Power supply: 3/N/PE/400V AC Frequency: 50 Hz Connected load: 8 kW Fuse protection: 32 A Maximum laser power: 100 W Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Model: EOSINT P 380 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Csdpfxoyguk Aj Afnsgn Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470 Cjdpfxsyguhhs Afnsgn

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, Here, as a specialist dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines currently in use. Year of manufacture: 2010. We have been wholesalers of used injection moulding machines for over 25 years. Current tax notice – Advantage for buying used machines: From 01/07/2025, used machines will also qualify for special tax depreciation of 30% per annum. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine. Keyword: growth booster (§ 7 paragraph 2 EStG-E). Currently in stock at our Hannover warehouse and tested. Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP thermoplastics Extras: 2 additional robots: Linear robots LRX 100 and LRX 50 can also be purchased separately - 2 x core pull (movable and fixed WAP) - Pneumatic valve 1 on fixed WAP - Accumulator for increased injection performance - Rapid SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Mould approach control - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on moving WAP for blowing out - 12 temperature control zones - Potential-free BDE contact - Process monitoring - Cycle storage - Trend graphic – target/actual diagram - PV control - Active back pressure control - Single-owner machine – sourced in Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Max. opening stroke: 820 mm Min. mould height: 330 mm Cgodpsxqhuusfx Afnon Max. opening: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g / PS Injection pressure: 2304 bar Robot LRX S50 - 3 gripper circuits – 4 vacuum circuits Robot LRX 100 - 1 gripper circuit – 4 vacuum circuits Electrical Equipment Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation and software manual Available immediately ex our Hannover warehouse or delivered to your location (delivery at cost). The machine is functionally tested and in our sole ownership. The requested machine is immediately available from our Hannover warehouse, functionally tested, and can be inspected under power. About our machines and company: – We only sell machines owned by us, purchased from ongoing production, from our Hannover warehouse – All machines are inspected and tested before disassembly – We do NOT sell insolvency stock – we are NOT brokers dealing with third-party property – All machines come from successful companies where maintenance and care are taken as a matter of course – All listed machines are available for viewing in our warehouse

Condition: excellent (used), Year of construction: 2011, operating hours: 34,217 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, total length: 5,940 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 8,300 kg, Injection Moulding Machines ARBURG Allrounder 570 H 2000-800 Stock No.: 503669 Manufacturer: ARBURG Model: Allrounder 570 H 2000-800 Control System: Selogica Year of Manufacture: 2011 Operating Hours: 34,217 h For sale is a used ARBURG Allrounder 570 H 2000-800, year 2011. This machine features a screw diameter of 50 mm and a clamping force of 2000 kN. Ideally suited for efficient and precise injection moulding applications in plastics processing. Contact us for further information and a customised offer! Technical Data – Clamping Unit Clamping force: 2000 kN Tie bar spacing (h x v): 570 x 570 mm Platen size (h x v): 795 x 795 mm Min. mould height: 250 mm Max. mould height: 550 mm Max. daylight: 1000 mm Opening stroke: 450 mm Ejector stroke: 200 mm Ejector force: 60 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 1300 kg Technical Data – Injection Unit Screw diameter: 50 mm Shot volume: 392 cm³ Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 1000 Nm Free-flow injection rate: 656 g/s PS Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions (LxWxH): 5.94m x 2m x 2.21m Total weight: 8300 kg Cgjdpfx Asydkyzefnen Equipment HMI in German Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Mould heating 12x

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Cgodpfx Asygikwjfnen Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8040-0008, Plastic Injection Moulding Machine | Demag Ergotech - Systec 280/630-840 (2800-840) Clamping Force [kN]: 2,800 Number of components: 1 Clamping platen width [mm]: 950 Codjygidwspfx Afnegn Clamping platen height [mm]: 950 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centering ring diameter [mm]: 160 Minimum mould height [mm]: 330 Maximum mould height [mm]: 710 Maximum daylight opening [mm]: 675 Maximum ejector stroke [mm]: 200 Thread [M]: 20 Maximum mould weight [kg]: 3,700 Maximum mould weight, moving platen [kg]: 2,500 Screw diameter [mm]: EE1: 45 Max. shot weight [g] PS: EE1: 320 Injection unit arrangement: EE1: horizontal Equipment: 2-core pull, 6-fold cascade, with robot Inspection possible at any time by prior arrangement. Free loaded on truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGErgotech | Ergotec | Ergotech280

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Cedpfjygib Njx Afnogn Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Codpfx Aoygiafofnjgn Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7826-1082, Plastic Injection Moulding Machine | DEMAG Ergotech Extra 35-80 (350 - 80) Codpfsygh Rvjx Afnsgn Clamping force [kN]: 350 Number of components: 1 Clamping plate width [mm]: 390 Clamping plate height [mm]: 390 Clear tie bar spacing horizontal [mm]: 280 Clear tie bar spacing vertical [mm]: 280 Centric ring diameter [mm]: 110 Min. mould installation height [mm]: 180 Max. mould installation height [mm]: 350 Max. opening stroke [mm]: 350 Max. ejector stroke [mm]: 100 Thread [M]: 16 Max. mould weight [kg]: 310 Max. mould weight moving platen [kg]: 150 Screw diameter [mm]: EE1:18 Max. shot weight [g] PS: EE1:20 Injection unit orientation: EE1: horizontal Equipment: 2-core pull, without robot Inspection possible any time by appointment. Free loaded on truck (Butzbach). #Tags: DEMAG | Extra35 | Extra3580

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery dealership. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Advantage for Used Machinery Starting from 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as with new equipment. Keyword: Growth Booster (§ 7 Sec. 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower, 2-Color/2-Component Machine Control System: MC6 Year of Manufacture: 2014 Machine No.: 61020507 Operating Hours: 47,137 h 1st Injection Unit: 750 horizontal Injection unit/screw diameter: 50 mm Shot volume: 393 ccm Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit: 180 vertical Injection unit/screw diameter: 30 mm Shot volume: 85 ccm Cjdpfx Ajyf Uy Ujfnsgn Shot weight: 77 g Clamping Unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max platen spacing: 900 mm Min. installation height of mould: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Weight: 9,000 kg Extras Nozzle side: Needle shut-off A+C; 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Cooling water BGS with 6 circuits each on nozzle and ejector sides BluePower Technology: up to 40% energy savings The machine has been very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: free loaded onto buyer's truck, or free delivered to site against reimbursement of freight costs. Further information about the machines we offer and our company: - All machines we sell are purchased from ongoing production for our own stock in Hannover. - Every machine is inspected and tested before dismantling. - We do NOT deal in insolvency assets, nor do we act as brokers dealing with third-party goods. - All machines come from successful enterprises where regular maintenance and servicing are the standard. - All machines offered can be inspected at our warehouse.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, manual gasfiller Cgsdpfox Dtk Iex Afnon

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Cgjdjyf Ha Hjpfx Afnen Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S