Used Plasma Torch for sale (757)

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Including spare parts, consumables Todpfx Akszwlnroisd Full line has less than 2000 working hours Very good condition Available for inspection

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 300 CN – Deburring & Edge Rounding Machine The ADV 508 RW 300 CN is a compact automatic machine for deburring, light edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide belt grinding unit and rotating brush provides fast burr removal and consistent edge finishing in a single pass. The machine is particularly suitable for parts with larger outside contours. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features Deburring, light edge rounding and surface finishing Wide belt grinding unit for efficient burr removal Rotating brush for multidirectional edge processing Tedpfjzwqvuox Akijd Particularly effective on outside contours Suitable for steel, stainless steel and aluminium Servo-controlled workpiece height adjustment Variable feed speed Compact 300 mm working width Delta PLC control 7" touchscreen Technical Specifications Model: ADV 508 RW 300 CN Working width: 300 mm Material thickness: 0.5–80 mm Minimum workpiece: 50 × 50 mm with vacuum table / 30 × 30 mm with magnetic table Feed speed: 0.5–7 m/min Grinding unit: 1 × wide grinding belt Grinding belt: 1,650 × 320 mm Grinding belt motor: 5.5 kW Brush unit: 1 × rotating brush Rotating brush: Ø300 × 300 × 40 mm Brush motor: 2.2 kW Vacuum pump: 5.5 kW Height adjustment: Servo-controlled Control: Delta PLC Operating panel: 7" touchscreen Power supply: 3×380 V / 50 Hz Efficient Deburring & Edge Rounding The wide belt removes burrs and provides an even surface finish. The following rotating brush processes the workpiece from multiple directions for light and consistent edge rounding. This RW configuration is especially suitable for flat sheet metal parts with larger outside contours and limited complex internal contours, making it an efficient solution for repetitive production. Typical applications include machine construction, steel fabrication, enclosure manufacturing and general sheet metal processing. Service & Availability The ADV 508 RW 300 CN is expected to arrive in stock in September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides installation, technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 630 EU – Deburring & Edge Rounding Machine The ADV 508 RW 630 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide belt grinding unit and rotating brushes provides efficient burr removal and consistent edge rounding in a single process. Suitable for steel, stainless steel and aluminium. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 630 mm working width Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional edge rounding Vacuum and magnetic worktable Suitable for steel, stainless steel and aluminium Variable feed speed Siemens / Delta PLC control Large 21" touchscreen Technical Specifications Model: ADV 508 RW 630 EU Working width: 630 mm Material thickness: 0.5–100 mm Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 1,900 × 650 mm Grinding belt motor: 11 kW Rotating brushes: 4 × Ø250 × 300 × 40 mm Brush motors: 2 × 2.2 kW Disc brushes: 5 pcs. Disc brush motors: 5 × 1.1 kW Vacuum pump: 7.5 kW Conveyor drive: 1.5 kW Worktable: Vacuum + magnetic Control: Siemens / Delta PLC Todpfxjzwqv Ue Akied Operating panel: 21" touchscreen Power supply: 3~ 380 V / 50 Hz Efficient Deburring & Edge Rounding The wide grinding belt efficiently removes burrs and prepares the surface. The rotating brush system then processes the workpiece from multiple directions, creating consistent edge rounding on outside contours. The combined vacuum and magnetic table provides reliable workpiece holding for both magnetic and non-magnetic materials. Service & Availability The ADV 508 RW 630 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 1000 EU – Deburring & Edge Rounding Machine The ADV 508 RW 1000 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. With a 1,000 mm working width, wide belt grinding unit and 6 rotating brushes, the machine provides consistent processing of outside contours and reproducible results on steel, stainless steel and aluminium. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 1,000 mm working width Wide belt grinding unit for efficient burr removal 6 rotating brushes for multidirectional edge rounding Vacuum and magnetic worktable Suitable for steel, stainless steel and aluminium Frequency-controlled drives Siemens / Delta PLC control Large 21" touchscreen Todpfx Akjzwqwrjied High-quality European industrial components CE certified Technical Specifications Model: ADV 508 RW 1000 EU Working width: 1,000 mm Material thickness: 0.5–100 mm Grinding system: Wide belt grinding unit Rotating brushes: 6 pcs. Worktable: Vacuum + magnetic Control: Siemens / Delta PLC Operating panel: 21" touchscreen Drives: Frequency controlled Power supply: 400 V / 50 Hz Certification: CE Efficient Deburring & Edge Rounding The wide grinding belt efficiently removes burrs and prepares the surface. The six rotating brushes subsequently process the workpiece from multiple directions for consistent edge rounding. The combined vacuum and magnetic table provides reliable workpiece holding for both magnetic and non-magnetic materials. Service & Availability The ADV 508 RW 1000 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Todpfx Aksz Nx S Teiod Stock number: 0018

Condition: good (used), Year of construction: 2008, Offer 26289 Approximate technical specifications: Tedezvnb Sjpfx Akisd - CNC flame cutting machine with 2 torches, as shown in the picture - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Supporting table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons - Without supporting table!

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Todpfx Akezwfppjisd Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 60 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 400 mm, filter area: 84 m², actuation type: electric, total height: 4,400 mm, total length: 1,400 mm, total width: 1,500 mm, overall weight: 1,500 kg, Equipment: CE marking, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The Absolent dust filter is based on the latest and most efficient filtration technology. This solution works particularly well in installations operating in continuous mode (24/7). Dust-laden air is drawn in through an inlet located in the upper part of the filter. The heaviest dust particles fall directly into the dust collection container. The air, along with lighter particles, is directed further towards the filter cartridges, where the dust settles. The filtered air is then removed from the device through an outlet using an external fan. When the pressure drop across the filter cartridges exceeds the set limit value, valves open in the cleaning air tank, and a pulse of compressed air is released from the cleaning nozzles. This pulse causes the accumulated dust to detach from the filter surface and fall into the dust collection container. Range of applications: The Absolent A•dust is ideal for processes that generate dry dust, such as: • Welding • Laser and plasma cutting • Grinding and polishing Tsdpj Ady Dlofx Akijd Brand: Absolent Model: A•dust5 Parameters: Fan with a power of 18.5 kW. Capacity: 6000 m3/h Vacuum: 6000 Pa Filtration area: 84 m2 Included: Partial ductwork Summer/winter flap Stock number: 1175

Condition: new, functionality: fully functional, overall weight: 400 kg, Year of construction: 2026, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for Tjdpe Ahg Slsfx Akijd efficient local repair of asphalt concrete surfaces. Bitumen application equipment from TICAB is a vital special machinery in the construction industry. This modern sprayer is crucial in the economical and correct use of bitumen emulsion, a key component in asphalt. It is the bitumen spraying machine that ensures high-quality distribution of the material on the surface and, as a result, an even road surface. Technical Specifications ● Power block (Petrol Engine HONDA GX-160, air-cooled - 3.6 кWt) ● Engine power – 3.6 kw (4.8 hp.) ● Fuel gasoline – A92 and above. ● Fuel consumption – 1.4 liters\hours. ● Gear pump. ● Torch power – 75 kw. ● Gear reducer. ● The gas burner operating pressure – 1 bar. ● The gas cylinder recommended capacity – 27 l. ● The sprayer rod length – 8 m. ● The spray bar length – 1.5 m. ● The spraying by spray bar width – 1.7 m. (7 nozzles of Italian origin). ● Hand sprayer productivity – 4 l/m. ● Spray bar productivity – 28 l/m. ● Consumption of bitumen emulsion – 0.8 l/sq. m. ● Emulsion tank – 500 l. ● Weight (without emulsion) – 370 kg. ● Warranty – 1 year. Advantages ● 3-stage cleaning system. ● Universal assembly system. ● Pump system with the built-in filter for filling in/out the tank with bitumen emulsion. ● Built-in heating system (gas propane burner). Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions ● BS-500 can be mounted on a trailer or transport vehicle.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 30,000 h, laser power: 3,200 W, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, AVAILABLE FOR A SHORT TERM: TRUMPF TruLaser 3030 – 3.2 kW – Year 2007 with RotoLas! TECHNICAL DATA: Make: TRUMPF Type: TruLaser L 3030 – 3.2 kW Year of manufacture: 2007 Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 4,000 watts Tsdpfsu Afcbjx Akiod Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 12 mm Max. sheet thickness aluminum: 8 mm Operating hours: NC on 30,000 h (Oct. 2024) Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: TLF 2000 CO2 laser with high-frequency excitation, maintenance-free turbo radial blower, Reflector telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Maintenance-free three-phase servo motors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS High-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensors - Automatic sheet metal edge detection - Programmable power cycles - Microweld - Automatic shutdown - Workspace lighting - Sinumerik 840D control system: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - ToPs 100 lite workshop programming - Safety: multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TruFlow 3200 laser including lens monitoring sensors - PCS Process Control System - Preparation for LiftMaster - RotoLas pipe cutting system for cutting pipes and profiles

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, SYNC Nucleic Acids Extraction System (S032) Covid-19 Solutions/Auto Machine The SYNC Nucleic Acids Extraction System utilizes the unique characteristic of magnetic beads bonding with nucleic acid under a specific environment to purify the target nucleic acid samples. The purification protocol includes four basic steps: sample lysis, nucleic acid binding, wash and elution. Using SYNC Nucleic Acids Extraction System, the majority of nucleic acid purification processes will be done automatically and it dramatically reduces the human error and use the lab force much more efficiently. Using with the Geneaid Magnetic Beads Virus DNA/RNA Extraction Plate Kit, viral DNA/RNA such as SARS-COV-2, HBV, HCV and HIV would be automatically purified from nasopharyngeal swabs and plasma specimens. The purified viral DNA/RNA can be directly used for subsequent qRT-PCR detection. pecifications (Cat. # S032) Model Name: SYNC Nucleic Acids Extraction System Sample Processing: 1 - 32 samples per batch Reagent Type: Geneaid 96 well magnetic beads nucleic acid extraction plates Tjdpfxjuvdnzj Akied Control Interface: 10-inch touch panel Heat Block Temperature: Room temperature to 80°C Mixing Speed: 3 adjustable speeds Mixing Depth: Adjustable, based on reagent volume Collection Efficiency: 100 copies/ml Inter-WellPurification Accuracy: CV

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, For sale: EWM Tetrix XQ 400 Puls AC/DC W Expert welding machine including accessories (TIG Speed continuous drive 45 coldwire wire feeder/ABITIG 500W MT 4m torch/others). The system was purchased as an add-on for a BOKI linear welding automaton, intended for longitudinal welding of aluminium tubes/sheets. Welding was successful; however, the project was ultimately not realized. The equipment has run for approx. 20 hours = like new condition. Original price: CZK 354,800. Tjdpfx Aksy Hpamsied

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. - only 5 working days of operation, perfect conditions- warranty until Jan. 2027- Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack Tjdpfx Akszic Elsisd

Condition: used, Year of construction: 2016, Operating hours of the machine: 1271 h Tsdpfxszg U Sls Akisd Maximum feed width: 600 mm Processable sheet thickness: 1-120 mm Working height, constant: 850 mm Voltage: 400 V (50 Hz) / 480 V (60 Hz) Rated current: 30 A Rated power: 17 kW Protection class: IP 42 Feed rate, continuously adjustable: 1-4 m/min Depth: 1930 mm Width: 1600 mm Height: 1550 mm Machine weight, approx.: 2200 kg With the Pluto, you are opting for a compact machine for deburring parts cut with oxy-fuel and plasma processes. Features: - Tolerance and distortion compensation up to 6 mm - Durable steel wire brushes for edge finishing - Magnetic clamping system across the entire working width - Heat-resistant conveyor belt made of chrome leather - Incl. extraction system

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. Tsdpfx Aezhbf Uskisd • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Todpfxsftd T Ss Akisd parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: used, TIG hose package, welding torch, manual welding torch, TIG torch -Length: 8 m -Tuchel connector: 5 pin -Water cooled -Weight: 3.7 kg Todod Nv Apepfx Akiod

Condition: used, TIG hose package, welding torch, manual welding torch, TIG torch -with: torch body Tedpjd Nv Arefx Akijd -Length: 4 m -Tuchel connector: 5 pin -Water cooled -Weight: 2.1 kg

Condition: used, TIG hose package, welding torch, manual welding torch, TIG torch -with: torch body Tjdpfxjd Nv Azo Akisd -Length: 8 m -Tuchel connector: 5 pin -Water cooled -Weight: 3.3 kg

Condition: used, TIG hose package, welding torch, manual welding torch, TIG torch -with: torch body -Length: 8 m -Tuchel connector: 5 pin Todpfsd Nv A Iox Akijd -Water cooled -Weight: 3.5 kg

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Tedped Hintofx Akiod Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

Condition: new, table length 2900 mm table width 1200 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,77 t Tsdjd Iinaepfx Akisd dimensions 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Tedpfjd Iincsx Akied Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1400 mm table width 1400 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,5 t dimensions 1,4 x 1,4 x 0,9 m Todpfjd Iindjx Akisd Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Tedod Rawzjpfx Akied Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.